ZigBee Smart plug
Manual Pengguna
Pengenalan Produk
Berat peranti kurang daripada 1 kg. Ketinggian pemasangan kurang daripada 2 m disyorkan.
Arahan pemasangan
- Matikan kuasa
Untuk mengelakkan kejutan elektrik, sila rujuk pengedar atau profesional yang berkelayakan untuk mendapatkan bantuan semasa memasang dan membaiki. - Arahan pendawaian
Pastikan pendawaian yang betul sebelum menghidupkan peranti.
S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.
Spesifikasi
| Jenis Produk | Palam Pintar Zigbee |
| Input | 100-240VAC 50/60Hz |
| Keluaran | 100-240VAC 50/60Hz |
| Muatan maksimum | 10A/13A/16A/20A |
| ZigBee | IEEE 802.15.4 2.4GHZ |
| bahan | PC VO |
Ciri-ciri
ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.
 Alat Kawalan Jauh |
 Jadual Masa |
 Kawalan Suara |
 Kawalan Kongsi |
 Pemandangan Pintar |
|
The above functions are determined by the ZigBee Hub.
Arahan Operasi
- Muat turun APP
Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:
SmartThings Amazon Alexa Hue - Sambungan hab
Set the hub according to the user guide.
Support ZigBee plug hubs as follows:
Studio Gema
Echo Plus (model: ZE39KL)
Pertunjukan Gema Generasi Kedua (model: DW2JL)
Echo Plus Gen Kedua (model: L2D9R)
Hab Samsung SmartThings
Philips Hue
Jika sambungan gagal, sila alihkan hab lebih dekat dengan telefon anda dan cuba lagi. - Hidupkan kuasa
Selepas dihidupkan, peranti akan memasuki mod berpasangan semasa penggunaan pertama, dan penunjuk isyarat LED berkelip.
The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release. - Sambung ke Alexa
1. Power on the Plug
2. Ask, “Alexa, discover devices!
3. Plug ashes once it’s connected
4. Wait until Alexa finishes, check the new devices” First/Second….plug”
Sambung ke SmartThings
- Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
- Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”
Tetapan Semula Kilang
Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.
If you pair the device with the hub again, please reset the device to factory default.
Buatan China
Dokumen / Sumber
 |
Modul Suis Lampu ZigBee [pdf] Manual Pengguna Modul Suis Lampu, Modul Suis, Modul |