ZigBee 3.0 Wireless Push Button Smart Scene Switch Controller User Manual

ZigBee 3.0 Wireless Push Button Smart Scene Switch Controller

Maklumat Produk

Ciri-ciri

• Boleh dikawal oleh telefon iOS/telefon Android
• Sokong aplikasi "Kehidupan Pintar" dan "Tuya Smart"
• Voice control: Compatible with Alexa and Google home T mall Genie or Xiaodu speakers
• Fungsi pemasaan: Auto hidup/mati dengan fungsi pemasaan
• Perlindungan beban lampau untuk penggantian mudah suis mekanikal tradisional anda (memerlukan neutral)
• Adegan pintar
• Kumpulan peranti

Maklumat Keselamatan

Risk of electric shock: Electricity can cause personal injury and properly damage if not handled properly. If you are unsure of any part of these instructions, seek professional help from a qualified electrician.

Pasang

Notis:

• Pastikan kuasa pada pemutus litar dimatikan sebelum pendawaian.
• Neutral wire is required. Verify that the wall box contains a neutral wire (usually white). If the wall box does not have a neutral wire, try another location in the home or call a professional electrician to install the switch.
• Warna wayar yang ditunjukkan dalam manual ini adalah warna biasa dan mungkin berbeza di sesetengah rumah.
• Make sure the wire conductors are securely attached to each screw.
• Pastikan isyarat Wi-Fi stabil dan berfungsi dengan betul sebelum pendawaian.
• Jika anda tidak mempunyai pengalaman pendawaian, sila hubungi juruelektrik profesional.

Langkah Pertama:

• Matikan pemutus litar dan uji kuasa dengan penguji elektrik.
• Pastikan suis dimatikan sebelum pendawaian.

Langkah Kedua:

• Remove existing wall panels; turn on power at breaker and use electrical tester to check which wire is the line; the tester will beep when near the line.
• Turn off the power at the circuit breaker; if there is a power outage, use an electrical tester, pull the existing switch out; mark the wiring and other wires; disconnect the power with pliers and remove the wires from the existing switch.
• Connect the switch wires to the wall box with the wire conductors according to the wiring diagram below.
• Langkah ketiga: Install the switch using the screws provided and snap the wall plate onto it.
• Langkah keempat: Hidupkan semula kuasa pada pemutus litar, kemudian hidupkan lampu.

Gambarajah Pendawaian

The Live wire is connected to the “L” terminal, The Neutral wire is connected to the “N” terminal, Lighting wire is connected to “L1, L2, L3” terminals.

1. Gang switch lighting wire connection: “L1” terminal
2. Gang switch lighting wire connection: “L1,L2” terminals
3. Gang switch lighting wire connection: “L1,L2,L3” terminals

Tambah peranti

Add device to “Smart Life” or “Tuya Smart” APP

1. Step 1: Download and install the “Smart Life” or “Tuya Smart” APP: Scan the QR code below
   
2. Step 2: Enter the phone settings option, turn on the Bluetooth and WiFi functions, and turn on the product at the same time
3. Langkah 3: Buka APLIKASI Smart Life, daftar dan log masuk akaun anda, jika anda mempunyai akaun Smart Life, hanya log masuk.
4. Step 4: Power on after the wiring is completed, the device is powered on by default, press and hold the touch wall switch button for about 8, until the WiFi blue LED flashes quickly, enter the network configuration mode
5. Step 5: Enter the App, click the “+” at the top right of the page to enter the network connection page.
6. Step 6: Make sure your device’s light is blinking quickly(2 times per second) tap to proceed to the next steр.
7. Step 7: Enter your WiFi and password
8. Langkah 8: Namakan peranti anda.
9. Step 9: When the WiFi LED is on, the device is online.
   Kawal sekarang!

How to use smart speakers to control devices, such as Amazon Alexa, Google Assistant or T mall Genie?
Buka aplikasi Smart Life untuk memasuki "Saya" view and find the user Quide for “Me” view and find the user guide the corresponding smart speaker

【Note: Before using the smart speaker, please log in to your account on Amazon Alexa Google Assistant, or T mall Genie.]

Pengenalan operasi kawalan jauh RF

Packaged products are paired at the factory and do this wirelessly. If you need to add or replace the remote control switch, please refer to the following steps

Kaedah berpasangan
Press and hold the touch wall switch button for about 3 seconds. The red LED indicator lights up to enter the RF433 pairing mode. At this time, press the RF433 remote control switch a few times and the indicator light flashes off. The switch is controlled and paired successfully.

Kaedah pembersihan kod

Long press the touch wall switch button for 5 seconds until the red LED indicator flashes 3 times, the code is cleared successfully.