M5STACK NanoH2 Tiny IoT Development Board User Guide

M5STACK NanoH2 Tiny IoT Development Board

SPESIFIKASI

GARIS

M5NanoH2 is a miniature, low-power IoT development board within the M5Stack development kit series. Powered by the ESP32-H2 MCU, it boasts advanced wireless communication support Zigbee, facilitating seamless control of infrared IoT devices through its built-in infrared transmitter. The onboard ceramic antenna ensures a stable wireless communication connection. Additionally, the device features programmable RGB LEDs, adding a personalized visual touch to projects. The inclusion of Grove interfaces allows M5NanoH2 to flexibly expand with various M5 devices, supporting the connection of different device types through protocols such as UART and I2C. This provides developers with abundant hardware expansion possibilities. Suitable for applications in smart homes, industrial automation, health monitoring, and IoT devices, M5NanoH2 delivers a comprehensive development solution for innovative projects.

ESP32-H2 

1. Keupayaan Komunikasi:
   • Bluetooth® 5 (LE): Incorporates Bluetooth 5.0 technology for extended wireless coverage and faster data transmission.
   • Zigbee and Thread (802.15.4): Supports Zigbee and Thread communication protocols, offering flexible connectivity for IoT applications.
2. Pemproses dan Prestasi:
   • RISC-V 32-bit single-core processor: Delivers a highly flexible and scalable processor architecture.
   • Up to 160 MHz clock frequency: Ensures the device has fast and efficient data processing capabilities.
   • Industry-leading low-power and RF performance: Achieves a leading position in both power consumption and RF performance.
3. Ingatan:
   • Built-in 96 KB ROM: Used for storing firmware or program code. 320 KB SRAM: Utilized for runtime data storage.
   • 4 KB low-power SRAM: Specifically designed for low-power operations. Supports external Flash: Can extend the storage space for program code through an external memory.
4. Pin GPIO dan Antara Muka Boleh Aturcara:
   • Supports SPI, UART, I2C, I2S, RMT, TWAI, and PWM: Multiple communication interfaces, enhancing flexibility for data exchange with other de

MULA CEPAT

IDE ARDUINO 

Untuk mengakses rasmi Arduino webtapak (https://www.arduino.cc/en/Main/Software) and download the installation package for your operating system, follow these steps:

1. Buka Arduino IDE dan navigasi ke File -> Keutamaan -> Tetapan.
2. Salin Pengurus Papan M5Stack berikut URL dan tampalkannya ke dalam “Pengurus Papan Tambahan URLs”: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/arduino/package_m5stack_index.json
3.  Go to: Tools -> Board: -> Boards Manager…
4. Cari untuk M5Stack, cari dan klik "Pasang."
5. Pilih Alat -> Papan: -> Arduino M5Stack
6. Select M5NanoH2

SIRI BLUETOOTH 

• Buka Arduino IDE dan muatkan bekasampprogram: File -> Cthamples -> BluetoothSerial -> SerialToSerialBT.
• Sambungkan peranti ke komputer.
• Pilih port yang sesuai untuk memuat naik. Setelah selesai, peranti akan mendayakan Bluetooth secara automatik.
• The device name is set to ESP32test. Now, use a Bluetooth serial communication tool on your PC to achieve transparent transmission of Bluetooth serial data.

Pasang Arduino

User manual, how to use zigbee function

Zigbee OnOff Light(End Device)

Arduino IDE Tools：

• Tools -> Board: ESP32H2 Dev Module
• Tools -> Erase All Flash Before Sketch Upload: Enable
• Tools -> Flash Size: 2MB
• Tools -> Zigbee mode: Zigbee ED (end device)
• Tools -> Partition Scheme: custom

Zigbee On Off Switch(Coordinator)

Arduino IDE Tools

• Tools -> Board: ESP32H2 Dev Module
• Tools -> Erase All Flash Before Sketch Upload: Enable
•  Tools -> Flash Size: 2MB
• Tools -> Zigbee mode: Zigbee ZCZR (coordinator/router)
• Tools -> Partition Scheme: custom
• Zigbee ZCZR 2MB with spiffs

Langkah penggunaan 

1. Ensure that the coordinator is running and creating a network, burn the On Off Light code to the terminal node device.
2. After the device is started, it will automatically search and join the network, and On Off Switch will send light switching instructions at regular intervals.

Zigbee Scan Rangkaian

Arduino IDE Tools

• Tools -> Board: ESP32H2 Dev Module
•  Tools -> Erase All Flash Before Sketch Upload: Enable
• Tools -> Flash Size: 2MB
•  Tools -> Zigbee mode: Zigbee ZCZR (coordinator/router)
• Tools -> Partition Scheme: custom
•  Zigbee ZCZR 2MB with spiffs

Langkah penggunaan

After the device is started, it automatically starts scanning. If there is an active Zigbee network in the surrounding area, the current display result will be scanned after each scan is completed, and the next round of scanning will be automatically started.

Buka Benang

Arduino IDE Tools

•  Tools -> Board: ESP32H2 Dev Module
• Tools -> Erase All Flash Before Sketch Upload: Enable
• Tools -> Flash Size: 2MB
• Tools -> Partition Scheme: Minimal SPIFFS (1.3MB APP/700K SPIFFS)

Amaran FCC

Awas FCC:
Sebarang Perubahan atau pengubahsuaian yang tidak diluluskan secara nyata oleh pihak yang bertanggungjawab untuk pematuhan boleh membatalkan kuasa pengguna untuk mengendalikan peralatan.
Peranti ini mematuhi bahagian 15 Peraturan FCC. Operasi tertakluk kepada dua syarat berikut:

1. Peranti ini mungkin tidak menyebabkan gangguan berbahaya, dan
2. Peranti ini mesti menerima sebarang gangguan yang diterima, termasuk gangguan yang boleh menyebabkan operasi yang tidak diingini.

NOTA PENTING:

Nota: Peralatan ini telah diuji dan didapati mematuhi had untuk peranti digital Kelas B, menurut bahagian 15 Peraturan FCC. Had ini direka bentuk untuk memberikan perlindungan yang munasabah terhadap gangguan berbahaya dalam pemasangan kediaman. Peralatan ini menjana, menggunakan dan boleh memancarkan tenaga frekuensi radio dan, jika tidak dipasang dan digunakan mengikut arahan, boleh menyebabkan gangguan berbahaya kepada komunikasi radio. Walau bagaimanapun, tiada jaminan bahawa gangguan tidak akan berlaku dalam pemasangan tertentu. Jika peralatan ini menyebabkan gangguan berbahaya kepada penerimaan radio atau televisyen, yang boleh ditentukan dengan mematikan dan menghidupkan peralatan, pengguna digalakkan untuk cuba membetulkan gangguan dengan satu atau lebih daripada langkah berikut:

• Arahkan semula atau letakkan semula antena penerima.
• Tingkatkan pemisahan antara peralatan dan penerima.
• Sambungkan peralatan ke dalam alur keluar pada litar yang berbeza daripada yang disambungkan kepada penerima.
• Rujuk pengedar atau juruteknik radio/TV yang berpengalaman untuk mendapatkan bantuan.

Kenyataan Pendedahan Sinaran FCC: Peralatan ini mematuhi had pendedahan sinaran FCC yang ditetapkan untuk persekitaran yang tidak terkawal. Peralatan ini hendaklah dipasang dan dikendalikan dengan jarak minimum 20cm antara radiator & badan anda.

Julat Kekerapan:

• BLE 1M/2M: 2402-2480MHz
• ZigBee: 2405-2480MHz
• Maximum ElRP for CE:
• BLE: 1.32 dBm
• ZigBee: 1.4 dBm
• Pengeluar : M5Stack Technology Co., Ltd
• Blok A10, Expo Bay South Coast, Fuhai Street, Bao'an District, Shenzhen, China

Soalan Lazim

• Q: What is the main processor of the M5STACK NanoH2?
  A: It uses an ESP32-H2FH4S with a RISC-V 32-bit single-core processor, running at up to 160 MHz.
• Q: What communication protocols does it support?
  A: It supports Zigbee, Thread (802.15.4), SPI, UART, I2C, I2S, RMT, TWAI, and PWM.
• Q: How much memory does the NanoH2 have?
  A: It has 96 KB ROM, 320 KB SRAM, and 4 KB low-power SRAM, with support for external Flash.
• Q: Can I use the M5STACK NanoH2 as a Zigbee coordinator and an end device?
  A: Yes, the device can be configured as both a Zigbee End Device (ED) or a Coordinator/Router (ZCZR) through the Arduino IDE settings.
• Q: What is the frequency range for wireless communication?
  A: The frequency range for BLE 1M/2M is 2402-2480MHz, and for ZigBee it is 2405-2480MHz.