Keeson RC302F Remote Control User Manual

Keeson RC302F Remote Control

Spesifikasi

• Nama Produk: KAWALAN JAUH
• model: RC302F
• Input: 3 x Battery AAA 1.5V
• Pengeluar: Keeson Technology Corporation Limited
• Negara Pengilang: China

Arahan Penggunaan

Pelarasan Asas

• Head Up: Press and hold the ‘HEAD UP’ button. The head actuator will move out. Release to stop.
• Head Down: Press and hold the ‘HEAD DOWN’ button. The head actuator will move in. Release to stop.
• Foot Up: Press and hold the ‘FOOT UP’ button. The foot actuator will move out. Release to stop.
• Foot Down: Press and hold the ‘FOOT DOWN’ button. The foot actuator will move in. Release to stop.
• Lumbar Up: Press and hold the ‘LUMBAR UP’ button. The lumbar actuator will move out. Release to stop.
• Lumbar Down: Press and hold the ‘LUMBAR DOWN’ button. The lumbar actuator will move in. Release to stop.
• Tilt Up: Press and hold the ‘TILT UP’ button. The head tilt actuator will move out. Release to stop.
• Tilt Down: Press and hold the ‘TILT DOWN’ button. The head tilt actuator will move in. Release to stop.

Fungsi Khas

• UBB (Underbed Light): Click the ‘UBB’ button to turn the underbed light on or off.
• Massage Head +: Click the ‘MASSAGE HEAD +’ button to cycle through head massage intensity levels (0-1-2-3).
• Massage Head -: Click the ‘MASSAGE HEAD -‘ button to gradually decrease head massage intensity (3 levels).
• Massage Foot +: Click the ‘MASSAGE FOOT +’ button to cycle through foot massage intensity levels (0-1-2-3).
• Massage Foot -: Click the ‘MASSAGE FOOT -‘ button to gradually decrease foot massage intensity (3 levels).
• Pemasa Urut: If massage motors are active, click this button to switch the massage time. Setting the timer to ‘0’ will turn off the massage. This button is inactive if massage motors are off.
• Flat: Click the ‘FLAT’ button to return the bed to a flat position. The process will stop if any other button is clicked during movement.
• Zero G (ZG): Click the ‘ZG’ button to move the bed to the Zero Gravity position. The movement will stop if any other button is clicked during the process.
• Kedudukan Ingatan: Click the ‘MEMORY POSITION’ button to move the bed actuators to a pre-set memory position.

Berakhirview

1. Menuju ke
   Press and hold the HEAD UP button of the remote, the head actuator moves out, stop when released.
2. Tunduk
   Press and hold the HEAD DOWN button of the remote, the head actuator moves in, and stops when released.
3. angkat kaki
   Press and hold the FOOT UP button of the remote, the foot actuator moves out, stop when released.
4. kaki ke bawah
   Press and hold the FOOT DOWN button of the remote, the foot actuator moves in, stop when released.
5. Lumbar naik
   Press and hold the LUMBAR UP button of the remote. The lumbar actuator moves out and stops when released.
6. Lumbar ke bawah
   Press and hold the LUMBAR DOWN button of the remote, the lumbar actuator moves in, and stops when released.
7. Condong ke atas
   Press and hold the TILT UP button of the remote, the head tilt actuator moves out, and stops when released.
8. Condongkan ke bawah
   Press and hold the TILT DOWN button of the remote, the head tilt actuator moves in, and stops when released.
9. UBB
   Click the Underbed light button to open or shut the light under the bed.
10. Massage head +
    Click the MASSAGE HEAD button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
11. Massage foot +
    Click the MASSAGE Foot button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
12. Massage head –
    Clicking will cause the intensity of the head massage to gradually decrease, with a total of 3 levels.；
13. Massage foot –
    Clicking will cause the foot massage intensity to cycle and decrease gradually, with a total of 3 levels.；
14. Pemasa urut
    If the massage motors do not work, the button is invalid. If the massage motors work, click the button to switch the massage time. When the massage time switches to 0, turn off the massage.
15. rata
    Click the FLAT button, and the bed goes flat. Stop when you click any button during the process of going flat.
16. butang ZG
    Click the ZG button, the actuator moves to the ZG position, and stops when any button is clicked during the movement.
17. Kedudukan ingatan
    Click the memory position to move the actuator to the memory position.

PENYATA FCC

Amaran FCC
Peralatan ini telah diuji dan didapati mematuhi had untuk peranti digital Kelas B, menurut bahagian 15 Peraturan FCC. Had ini direka bentuk untuk memberikan perlindungan yang munasabah terhadap gangguan berbahaya dalam pemasangan kediaman. Peralatan ini menjana, menggunakan, dan boleh memancarkan tenaga frekuensi radio dan, jika tidak dipasang dan digunakan mengikut arahan, boleh menyebabkan gangguan berbahaya kepada komunikasi radio. Walau bagaimanapun, tiada jaminan bahawa gangguan tidak akan berlaku dalam pemasangan tertentu. Jika peralatan ini menyebabkan gangguan berbahaya kepada penerimaan radio atau televisyen, yang boleh ditentukan dengan mematikan dan menghidupkan peralatan, pengguna digalakkan untuk cuba membetulkan gangguan dengan satu atau lebih daripada langkah berikut:

• Arahkan semula atau letakkan semula antena penerima.
• Tingkatkan pemisahan antara peralatan dan penerima.
• Sambungkan peralatan ke dalam alur keluar pada litar yang berbeza daripada yang disambungkan kepada penerima.
• Rujuk pengedar atau juruteknik radio/TV yang berpengalaman untuk mendapatkan bantuan.

Sebarang Perubahan atau pengubahsuaian yang tidak diluluskan secara nyata oleh pihak yang bertanggungjawab untuk pematuhan boleh membatalkan kuasa pengguna untuk mengendalikan peralatan.
Peranti ini mematuhi bahagian 15 Peraturan FCC. Operasi tertakluk kepada dua syarat berikut:

1. Peranti ini mungkin tidak menyebabkan gangguan berbahaya, dan
2. Peranti ini mesti menerima sebarang gangguan yang diterima, termasuk gangguan yang boleh menyebabkan operasi yang tidak diingini.

Maklumat Pendedahan RF

• Peranti telah dinilai untuk memenuhi keperluan pendedahan RF am. Peranti boleh digunakan dalam keadaan pendedahan mudah alih tanpa sekatan.

Amaran RSS ISED
Peranti ini mematuhi piawaian RSS yang dikecualikan daripada lesen Inovasi, Sains dan Pembangunan Ekonomi Kanada. Operasi tertakluk kepada dua syarat berikut:

1. This devicemay not cause interference, and
2. Peranti ini mesti menerima sebarang gangguan, termasuk gangguan yang boleh menyebabkan pengendalian peranti yang tidak diingini.

Menyelesaikan masalah

• Jauh tidak bertindak balas: Ensure batteries are correctly inserted and not depleted. Replace with new AAA 1.5V batteries if necessary.
• Bed not moving: Check if the remote’s batteries are working. Ensure no obstructions are preventing bed movement. If the bed is stuck, try pressing the ‘FLAT’ button.
• Massage not working: Ensure the massage motors are turned on. The ‘Massage Timer’ button will be invalid if the motors are off.
• Pendedahan RF: Peranti telah dinilai untuk memenuhi keperluan pendedahan RF am dan boleh digunakan dalam keadaan pendedahan mudah alih tanpa sekatan.

Soalan Lazim

• Q: What type of batteries does the remote use?
  • A: The RC302F remote control uses 3 x AAA 1.5V batteries.
• Q: How do I stop the bed from moving to a preset position (eg, Flat or Zero G)?
  • A: You can stop the bed’s movement to a preset position by clicking any other button on the remote during the process.
• S: Bolehkah saya melaraskan keamatan urutan?
  • A: Yes, you can increase head/foot massage intensity using ‘MASSAGE HEAD +’ / ‘MASSAGE FOOT +’ buttons and decrease it using ‘MASSAGE HEAD -‘ / ‘MASSAGE FOOT -‘ buttons. There are 3 levels of intensity.
• Q: What does the UBB button do?
  • A: The UBB button controls the underbed light, turning it on or off with a click.
• Q: What should I do if the remote isn’t working after changing batteries?
  • A: Ensure the new batteries are inserted with the correct polarity. If the issue persists, contact Keeson Technology Corporation Limited customer support.