Keeson RC309A Remote Control User Manual

Keeson RC309A Remote Control

Spesifikasi

• Nama Produk: KAWALAN JAUH
• model: RC309A
• Input: 2 x bateri AAA 1.5V
• Pengeluar: Keeson Technology Corporation Limited
• Negara pembuatan: China

Arahan Penggunaan

Figure 1 illustrates the buttons on the remote control.

1. Menuju ke
   Press and hold the HEAD UP button of the remote, the head actuator moves out, stop when released.
2. Tunduk
   Press and hold the HEAD DC NNN button of the remote, the head actuator moves in, and stops when released.
3. angkat kaki
   Press and hold the FOOT UP button of the remote, the foot actuator moves out, stop when released.
4. kaki ke bawah
   Press and hold the FOOT button of the remote, the foot actuator moves in, stop when released.
5.  rata
   lick FLAT button, the bed goes flat. Stop when you click any button during the process of going flat.
6. Kepala urut 
   lick MASSAGE HEAD button, head massage motor switches massage intensity, massage intensity switches among 0-1-2;
7. butang ZG
   Click the ZG button, the actuator moves to the ZG position, stop when clicking any button during the movement.
8. Memory Favorite position
   licking once will move the app to the Favorite position; long-pressing to memorize the position. The backlight will flash twice, and releasing the button will continue the flashing.
9. Kunci
   Press and hold the child lock button until the red light flashes twice, indicating that the child lock is successfully engaged. During the locking process, pressing any button will cause the red light to flash for 2 seconds, indicating that the lock is engaged.

Maklumat produk

• Product Name: REMOTE CONTROL
• Model: RC309B
• Input: 2 x Battery AAA 1.5V
• Pengilang: Keeson Technology Corporation Limited
• Negara pengilang: China

Amaran FCC:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can adiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Arahkan semula atau letakkan semula antena penerima.
• Tingkatkan pemisahan antara peralatan dan penerima.
• Sambungkan peralatan ke dalam alur keluar pada litar yang berbeza daripada yang disambungkan kepada penerima.
• Rujuk pengedar atau juruteknik radio-TV yang berpengalaman untuk mendapatkan bantuan.

Sebarang Perubahan atau pengubahsuaian yang tidak diluluskan secara nyata oleh pihak yang bertanggungjawab untuk pematuhan boleh membatalkan kuasa pengguna untuk mengendalikan peralatan. Peranti ini mematuhi bahagian 15 Peraturan FCC. Operasi tertakluk kepada dua syarat berikut:

1. Peranti ini mungkin tidak menyebabkan gangguan berbahaya,
2. Peranti ini mesti menerima sebarang gangguan yang diterima, termasuk gangguan yang boleh menyebabkan operasi yang tidak diingini.

Maklumat Pendedahan RF

Peranti telah dinilai untuk memenuhi keperluan pendedahan RF am. Peranti boleh digunakan dalam keadaan pendedahan tanpa sekatan.

Amaran RSS ISED:

This device complies with Innovation, Science and Economic Development Canada licence, exemplifying RSS standard(s). Operation is subject to the following two conditions:

• Peranti ini mungkin tidak menyebabkan gangguan.
• This device must accept any interference, including interference that mav cause undesired operation of the device.

Menyelesaikan masalah

If the remote control is not functioning as expected:

• Semak Bateri: Ensure that two AAA 1.5V batteries are correctly inserted and have sufficient charge.
• Kunci Kanak-kanak: If the remote is unresponsive and the red light flashes for 2 seconds when a button is pressed, the child lock may be engaged. Refer to section 1.7 to disengage the child lock.
• Gangguan: This device complies with FCC rules regarding interference. If you experience unexpected operation, it might be due to external interference. Ensure there are no strong radio frequency sources nearby.

Soalan Lazim

Q: What type of batteries does the RC309A remote control use?
A: Alat kawalan jauh memerlukan 2 x bateri AAA 1.5V.

Q: How do I stop the bed from moving once I’ve pressed a position button?
A: For continuous movements like Head Up/Down or Foot Up/Down, release the button to stop. For preset positions like Flat or ZG, clicking any button during the movement will stop the process.

Q: What does it mean if the red light flashes for 2 seconds when I press a button?
A: This indicates that the child lock feature is currently engaged. You will need to disengage the child lock to use the remote’s functions (refer to section 1.7).

S: Bolehkah saya mengubah suai alat kawalan jauh?
A: Any changes or modifications not expressly approved by the manufacturer could void your authority to operate the equipment and are not recommended.