1. Pengenalan
This manual provides essential information for the proper installation, operation, and maintenance of your AEGISLINK SC-WF240 Wi-Fi Combination Smoke and Carbon Monoxide Detector. This device is designed to detect both smoke and carbon monoxide, providing early warning of potential hazards in your home. It features an LCD display, a replaceable battery, and smart connectivity via the TuyaSmart or Smart Life application.
Figure 1: The AEGISLINK SC-WF240 detector features an LCD display and connects to a mobile application for remote monitoring and control.
2. Maklumat Keselamatan
Please read and understand all instructions before installing and operating the detector. Failure to follow these instructions may result in property damage, injury, or death. This detector is not intended to replace proper installation, use, and maintenance of fuel-burning appliances, including appropriate ventilation and exhaust systems.
- Do not paint the detector. Paint can clog the openings and interfere with the sensor's ability to detect smoke and carbon monoxide.
- Jangan pasang in areas with extreme temperatures or humidity. Refer to specifications for operating ranges.
- Test the alarm weekly untuk memastikan fungsi yang betul.
- Gantikan bateri promptly when a low battery warning is indicated.
- Never ignore an alarm. Investigate the cause immediately.
3. Produk Lebihview
3.1 Ciri-ciri Utama
- Dual Sensor Protection: Equipped with a photoelectric smoke sensor and an electrochemical CO sensor for reliable detection.
- Kesambungan Wi-Fi: Connects to a 2.4 GHz Wi-Fi network for smart features and remote monitoring.
- Kawalan Apl Mudah Alih: Compatible with TuyaSmart and Smart Life apps for remote silencing, real-time alerts, and status checks.
- Paparan LCD: Provides clear digital readout of carbon monoxide levels.
- Bateri Boleh Ganti: Powered by a CR123A lithium battery, offering approximately 1 year of continuous protection.
- Fungsi Semak Kendiri: Continuously monitors sensor, battery, and Wi-Fi connection status, sending alerts if issues arise.
- Penunjuk LED: 3-color LED (Green, Red, Yellow) indicates normal operation, alarm condition, or malfunction/low battery.
3.2 Kandungan Pakej
- 1 x Smart Smoke and Carbon Monoxide Detector SC-WF240
- 1 x CR123A Replaceable Battery
- 1 x Kurungan Pemasangan
- 1 x Parts Kit (Screws and Wall Plugs)
- 1 x Manual Pengguna
4. Spesifikasi Teknikal
| Spesifikasi | Perincian |
|---|---|
| Nombor Model | SC-WF240 |
| Sumber Kuasa | 1 x CR123A Lithium Battery (included) |
| Jenis Sensor | Fotoelektrik (Asap), Elektrokimia (CO) |
| Kelantangan Penggera | Boleh didengari |
| Dimensi Produk | 1.4"D x 5.03"W x 5.03"H (3.56 cm D x 12.78 cm W x 12.78 cm H) |
| Berat Barang | 3.2 auns (0.09 kg) |
| bahan | ABS kalis api |
| warna | putih |
| Kaedah Pemasangan | Skru Masuk |
| Kawasan Liputan | 215-430 sq.ft (20-40 sq.m) |
| Voltage | 3 Volt |
| Kekerapan Wi-Fi | 2.4 GHz |
5. Pemasangan
5.1 Memilih Lokasi Pemasangan
Proper placement is crucial for effective detection. Install the detector in every sleeping area and on every level of your home. For optimal performance, avoid 'dead air space' where smoke and CO may not reach the detector quickly.
- On a ceiling, position the detector at least 4 inches (10 cm) from any wall.
- On a wall, position the detector between 4 and 12 inches (10-30 cm) from the ceiling.
- Avoid placing near windows, doors, or areas with high airflow that could interfere with sensor readings.
- Do not install in kitchens, bathrooms, or garages where cooking fumes, steam, or vehicle exhaust could cause false alarms.
Figure 2: Proper installation involves placing the detector away from 'dead air space' – typically 4 inches (10 cm) from a wall on a ceiling, or 20 inches (50 cm) from a ceiling on a wall.
Figure 3: Recommended installation locations include bedrooms, living rooms, studies, and garages to ensure comprehensive home safety.
5.2 Pemasangan Bateri
- Twist the mounting bracket counter-clockwise to detach it from the detector unit.
- Locate the battery compartment on the back of the detector.
- Insert the provided CR123A lithium battery, ensuring correct polarity (+/-).
- The detector will emit a short beep and the LED will flash, indicating it has powered on.
Figure 4: The detector uses a replaceable CR123A lithium battery, providing approximately one year of continuous power.
5.3 Memasang Pengesan
- After selecting an appropriate location, hold the mounting bracket against the ceiling or wall.
- Mark the positions for the two screw holes.
- Drill holes at the marked positions and insert the wall plugs (if necessary).
- Kencangkan pendakap pelekap dengan skru yang disediakan.
- Align the detector with the mounting bracket and twist clockwise until it locks securely into place.
6. App Setup & Wi-Fi Connection
6.1 Memuat turun Apl
- Download the 'TuyaSmart' or 'Smart Life' app from the App Store (iOS) or Google Play Store (Android).
- Daftar atau log masuk ke akaun anda.
6.2 Menyambung ke Wi-Fi
- Ensure your smartphone is connected to a 2.4 GHz Wi-Fi network. The detector does not support 5 GHz networks.
- Open the TuyaSmart or Smart Life app.
- Ketik '+' untuk menambah peranti baharu.
- Select 'Security & Video Surveillance' then 'Smoke Detector (Wi-Fi)' or 'CO Detector (Wi-Fi)'.
- Follow the in-app instructions to put the detector into pairing mode (usually by pressing and holding the test button until the LED flashes rapidly).
- Masukkan kata laluan rangkaian Wi-Fi anda apabila digesa.
- Wait for the app to discover and connect to the device. Once connected, the LED will stop flashing rapidly.
Figure 5: The device establishes a Wi-Fi connection using a 2.4 GHz frequency, enabling smart features.
7. Operasi
7.1 Status Penunjuk LED
- LED hijau: Flashes once every 60 seconds, indicating normal operation.
- LED Merah: Flashes rapidly and the alarm sounds, indicating a smoke or carbon monoxide alarm condition.
- LED kuning: Flashes every 40 seconds, indicating a malfunction or low battery.
7.2 Paparan LCD
The LCD display shows the current carbon monoxide concentration in parts per million (PPM). In normal conditions, it may show '0 PPM' or a low background reading. During a CO alarm, it will display the detected CO level.
Figure 6: The mobile application provides real-time information on carbon monoxide levels and the detector's battery status.
7.3 Menguji Penggera
It is recommended to test the alarm weekly to ensure it is functioning correctly.
- Press and hold the 'TEST' button on the detector for a few seconds.
- The alarm will sound, and the red LED will flash. This indicates the alarm is working.
- The app will also receive a test notification.
7.4 App Control and Alerts
- Makluman masa nyata: Receive push notifications on your smartphone for smoke alarms, CO alarms, low battery warnings, and malfunctions.
- Remote Silencing: In case of a non-emergency alarm (e.g., cooking fumes), you can mute the alarm directly from the app.
- Pemantauan Status: View the current status of the detector, including smoke concentration, CO levels, and battery life, within the app.
Figure 7: Users receive immediate push notifications on their smartphone if critical CO levels are detected, prompting quick action.
Figure 8: Alarms can be silenced remotely through the mobile application, eliminating the need to physically reach the device.
8. Penyelenggaraan
8.1 Penggantian Bateri
When the yellow LED flashes every 40 seconds and the app indicates a low battery, it is time to replace the CR123A lithium battery.
- Putar pengesan lawan arah jam untuk menanggalkannya dari pendakap pelekap.
- Buka petak bateri.
- Keluarkan bateri lama dan buang mengikut peraturan tempatan.
- Insert a new CR123A lithium battery, observing correct polarity.
- Reattach the detector to the mounting bracket by twisting clockwise until it locks.
- Test the alarm after battery replacement.
8.2 Cleaning the Detector
Clean the alarm cover and vents once a month to remove dust and dirt that could interfere with sensor operation.
- Use a soft brush or a vacuum cleaner with a soft brush attachment to gently clean the exterior of the detector.
- Do not use water, cleaning solutions, or solvents, as these can damage the unit.
- Never paint the detector.
9. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Alarm sounds frequently without apparent smoke/CO. | False alarm due to steam, cooking fumes, dust, or improper placement. | Relocate the detector away from sources of steam/fumes. Clean the detector. Ensure proper installation distance from walls/ceilings. |
| Yellow LED flashes, and detector chirps. | Bateri lemah atau kerosakan peranti. | Replace the CR123A battery. If the issue persists, contact customer support. |
| Detector does not connect to Wi-Fi. | Incorrect Wi-Fi password, 5 GHz network, or weak signal. | Ensure you are using a 2.4 GHz Wi-Fi network. Verify password. Move detector closer to router or use a Wi-Fi extender. Re-attempt pairing. |
| No alarm during test. | Dead battery, faulty unit, or incorrect test procedure. | Replace battery. Ensure test button is pressed firmly and held. If still no alarm, replace the unit. |
| App does not receive notifications. | App notification settings disabled, phone not connected to internet, or detector not connected to Wi-Fi. | Check app notification settings. Ensure phone has internet access. Verify detector's Wi-Fi connection status in the app. |
10. Waranti dan Sokongan
Your AEGISLINK SC-WF240 detector comes with a Waranti 5 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It also includes a Polisi pemulangan 60 hari.
For technical support, warranty claims, or any questions regarding your product, please contact AEGISLINK customer service. Lifetime technical support is provided.
- e-mel: support@aegislink.co.uk
- Pengeluar: AEGISLINK
