pengenalan
The SFA Sanibroyeur Pro Up is a high-performance macerating pump designed for efficient wastewater evacuation from a toilet and a washbasin. This unit allows for the installation of sanitary facilities in locations where traditional gravity drainage is not feasible. Its compact design and silent operation make it an ideal solution for discreet integration into various environments. This manual provides essential information for the safe and correct installation, operation, and maintenance of your Sanibroyeur Pro Up.
Image: SFA Sanibroyeur Pro Up Macerating Pump, showing its compact white casing and connection points.
Arahan Keselamatan
- Always disconnect the power supply before any installation, maintenance, or repair work.
- Ensure the electrical installation complies with local standards and regulations.
- Perkakas mesti dibumikan.
- Do not dispose of foreign objects (cotton, wipes, sanitary products, etc.) into the toilet connected to the macerator, as this can cause blockages and damage the unit.
- Perkakas ini tidak dimaksudkan untuk digunakan oleh orang (termasuk kanak-kanak) yang kurang keupayaan fizikal, deria atau mental, atau kurang pengalaman dan pengetahuan, melainkan mereka telah diberi pengawasan atau arahan mengenai penggunaan perkakas oleh orang yang bertanggungjawab untuk keselamatan mereka.
Persediaan dan Pemasangan
The Sanibroyeur Pro Up is designed for installation behind a WC with a horizontal outlet, and can also connect to a washbasin.
- penempatan: Position the macerator directly behind the toilet. Ensure sufficient space for connections and future maintenance.
- Wastewater Connections: Connect the toilet outlet to the macerator's inlet. The unit is designed to handle wastewater from a toilet and one washbasin. Ensure all connections are sealed properly to prevent leaks. The evacuation pipe diameter should be between 22 mm and 32 mm.
- Paip Nyahcas: Connect the macerator's discharge outlet to the main drainage system. The unit can pump wastewater up to 5 meters vertically and 100 meters horizontally. Ensure the discharge pipe has a continuous slope to prevent standing water.
- Sambungan Elektrik: Connect the 400W motor to a dedicated 220/240V electrical supply. Ensure the circuit is protected by a residual current device (RCD) and complies with all local electrical codes.
- Ujian: After installation, perform a test run by flushing the toilet and running water in the washbasin to check for proper operation and absence of leaks.
Image: Illustration of the SFA Sanibroyeur Pro Up discreetly installed behind a toilet, showing its integration into a bathroom setting.
Arahan Operasi
The SFA Sanibroyeur Pro Up operates automatically. When wastewater enters the unit, a pressure switch activates the motor, which then macerates the waste and pumps it through the discharge pipe.
- Pengaktifan Automatik: The unit will automatically start when the water level inside rises, indicating waste entry.
- Operasi senyap: The Sanibroyeur Pro Up is designed for quiet operation, with a maximum noise level of 46 dB.
- Kuasa: The 400W motor ensures efficient maceration and powerful discharge of wastewater.
- penggunaan: Use the connected toilet and washbasin as normal. Avoid flushing anything other than human waste and toilet paper.
Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your Sanibroyeur Pro Up.
- Pembersihan: Periodically clean the unit using a non-corrosive, macerator-safe cleaning product. Follow the cleaner's instructions.
- Akses Bakul: The Sanibroyeur Pro Up features direct access to the macerating basket, allowing for easy maintenance without requiring complete disassembly of the unit.
- Pemeriksaan: Regularly inspect connections for any signs of leaks or wear.
- Servis profesional: For any complex issues or internal repairs, contact a qualified technician or SFA customer service.
Menyelesaikan masalah
If you encounter issues with your Sanibroyeur Pro Up, consider the following common troubleshooting steps:
- Unit Tidak Bermula:
- Check if the unit is properly plugged into a live electrical outlet.
- Sahkan pemutus litar tidak tersandung.
- Ensure no foreign objects are blocking the macerator blades. Disconnect power before checking.
- Unit Running Continuously:
- This often indicates a foreign object is lodged in the macerator, preventing the pressure switch from resetting. Disconnect power and inspect the basket.
- Check for leaks in the toilet or washbasin that might be continuously filling the unit.
- Bunyi atau Getaran Luar Biasa:
- Disconnect power immediately. A foreign object may be caught in the macerator blades.
- Ensure the unit is securely installed and not vibrating against walls or pipes.
- Kebocoran:
- Periksa semua sambungan paip untuk memastikan ia ketat.
- Inspect seals and gaskets for damage.
If these steps do not resolve the issue, please contact SFA customer support or a qualified plumber.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nama Model | Sanibroyeur Pro Up |
| Nombor Model Item | ST3STD |
| Pengeluar | SFA |
| Dimensi Produk (L x W x H) | 33.9 x 22.2 x 32.3 cm (13.35 x 8.74 x 12.72 inci) |
| Berat Barang | 5.5 Kilogram (12.13 lbs) |
| warna | putih |
| bahan | Keluli Tahan Karat |
| Sumber Kuasa | Elektrik Bertali |
| Voltage | 220 Volt |
| kuasa | 400 Watt |
| Ketinggian Angkat Maksimum | 5 Meter (16.4 kaki) |
| Maximum Horizontal Discharge | 100 Meter (328 kaki) |
| Tahap Kebisingan | 46 dB maks |
| Pipe Diameter for Evacuation | 22 hingga 32 mm |
| Komponen yang Disertakan | Connection accessories, Instruction manual, Sanibroyeur Pro |
| Negara Asal | Perancis |
Image: Technical drawing illustrating the dimensions and connection points of the SFA Sanibroyeur Pro Up.
Waranti dan Sokongan
The SFA Sanibroyeur Pro Up is manufactured with high-quality materials and benefits from the "Origine France Garantie" label, ensuring its French origin and quality craftsmanship.
- Waranti: Produk ini disertakan dengan a Waranti 5 tahun dari tarikh pembelian. Sila simpan bukti pembelian anda untuk tuntutan waranti.
- Sokongan: For technical assistance, spare parts, or warranty service, please contact SFA customer support. Refer to the contact information provided with your product packaging or visit the official SFA webtapak.
