MANUAL ARAHAN
Modul Suis Zigbee-L
1CH,2CH,3CH,4CH
(No Neutral Wire Required)
1CH Switch Module-L

![]()
SPESIFIKASI TEKNIKAL
| Jenis produk | Modul Suis Zigbee-L |
| Voltage | AC200-240V 50 / 60Hz |
| Maks. memuatkan | 1CH: 10-100W 2CH: 2x (10-100W) 3CH: 3x (10-100W) 4CH: 4x (10-100W) |
| Kekerapan operasi | 2.405GHz-2.480GHz |
| Suhu operasi. | -10 ℃ + 40 ℃ |
| Protokol | IEEE802.15.4 |
| Julat operasi | <100m |
| Malap (WxDxH) | 39.2×39.2×18 mm |
| Penarafan IP | IP20 |
| Waranti | 2 tahun |
| Sijil | CE ROHS |
with a mounting clip

PEMASANGAN
Amaran:
- Pemasangan mesti dilakukan oleh juruelektrik yang berkelayakan sesuai dengan peraturan tempatan.
- Jauhkan peranti daripada capaian kanak-kanak.
- Jauhkan peranti daripada air, damp atau persekitaran yang panas.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, resulting to abnormal operation of the device.
- Halangan oleh dinding konkrit atau bahan logam boleh mengurangkan julat operasi berkesan peranti dan harus dielakkan.
- JANGAN cuba membuka, membaiki atau mengubah suai peranti.
Soalan Lazim
S1: Apa yang harus saya lakukan jika saya tidak dapat mengkonfigurasi modul suis?
a. Please check whether the device is powered on. b. Make sure the Zigbee Gateway is available. c. Whether it’s in good internet conditions. d. Make sure the password entered in App is correct. e. Make sure the wiring is correct.
S2: Apakah peranti yang boleh disambungkan ke modul suis Zigbee ini?
such as a ceiling lamp, panel light, etc.
S3: Apa yang berlaku sekiranya WIFI dimatikan?
Anda masih boleh mengawal peranti yang disambungkan ke modul suis dengan suis tradisional anda, dan setelah WIFI aktif semula, peranti yang disambungkan ke modul akan menyambung secara automatik ke rangkaian WIFI anda.
S4: Apa yang harus saya lakukan jika saya menukar rangkaian WIFI atau menukar kata laluan?
You have to reconnect our Zigbee switch module to the new Wi-Fi network accordingly, as per the App User
S5: Bagaimana saya menetapkan semula peranti?
1. Switch on/off the traditional switch 5 times until the indicator light flashes. 2. Press the reset key for about 10 seconds until the indicator light flashes.
Arahan dan Gambarajah Pendawaian
- Matikan bekalan kuasa sebelum menjalankan kerja pemasangan elektrik.
- Sambungkan wayar mengikut gambarajah pendawaian.
- Masukkan modul ke dalam kotak persimpangan.
Turn on the power supply and follow the switch module configuration instructions. - Flash after the lights are off. Please attach accessories.
Amaran: Do not connect the neutral line; otherwise, it will be permanently damaged.

Modul Suis Zigbee 1CH-L

Modul Suis Zigbee 2CH-L

Gambar rajah pendawaian kelengkapan (L1 L2 Salah satu daripadanya)

Modul Suis Zigbee 3CH-L

Wiring diagram of fittings (L1 L2 L3 One of them)

Modul Suis Zigbee 4CH-L

MANUAL PENGGUNA APP
http://smart.tuya.com/download
APLIKASI IOS / Android
Scan the QR code to download the Tuya Smart App, or you can also search the keyword “Tuya Smart” on App Store or Google Play to download the App.
Log in or register your account with your mobile number or e-mail address. Type in the verification code sent to your mobile or email, then set your login password. Click “Create Family” to enter the APP.
Buka panel kawalan gerbang ZigBee pada Apl
Sebelum membuat operasi penetapan semula, sila pastikan Gerbang Zigbee ditambah dan dipasang pada rangkaian WIFI. Pastikan produk berada dalam julat Rangkaian Gerbang Zigbee.

Selepas pendawaian modul suis selesai, tekan kekunci set semula selama kira-kira 10 saat atau hidupkan/matikan suis tradisional 5 kali sehingga lampu penunjuk di dalam modul berkelip dengan cepat untuk berpasangan.

Klik “+” (Tambah sub-peranti) untuk memilih get laluan produk yang sesuai dan ikut arahan pada skrin untuk berpasangan.

The connection will take about 10-120 seconds to complete, depending on your network conditions.
Akhir sekali, anda boleh mengawal peranti melalui telefon bimbit anda.
KEPERLUAN SISTEM
Penghala WIFI®
Gerbang ZigBee
iPhone, iPad (iOS 7.0 atau lebih tinggi)
Android 4.0 atau lebih tinggi

![]()
Dokumen / Sumber
![]() |
Zigbee 1CH Switch Module-L [pdf] Manual Arahan 1CH Switch Module-L, Switch Module-L, Module-L |
