Pencetak Kod Bar Kod 128
5/22/25, 11:04 AM Code 128 ^BC (Kod 128)
^SM
- Penerangan
- Parameter
ZPL examples
- Sample ZPL dan cetakan dalam Subset A
- Sample ZPL dan cetakan dalam Subset B lalai
- Sample ZPL dan cetakan dalam Subset C
- Sample ZPL bertukar daripada Subset C ke B ke A
- Typical shipping format some major retailers guna
- Sample ZPL untuk kod bar UCC/EAN-128
- Printing the interpretation line in a different fon
- Merangkai beberapa pengecam aplikasi
- Lagi Cthamples
- Code 128 Barcode Size Calculator (Adams Communications Site)
Subset
- Subset
- Subset Invocation Character table
- Rules for Subsets A and C
- Rules for Subset B
- Set Aksara Kod 128
Maklumat tentang UCC/EAN
- Simbol UCC/EAN-128
- Pengecam Aplikasi
- Jadual Pengecam Aplikasi UCC
- EAN -14
Penerangan:
Code 128 is a high density, variable length, continuous, alphanumeric symbology. It was designed for complexly encoded product identification.
Each code 128 character consists of six elements: three bars and three spaces.
- ^BC supports a fixed print ratio.
- Field data (^FD) is limited to the width (or length, if rotated) of the label.
Parameter:
https://support.zebra.com/cpws/docs/zpl/code_128.htm
5/22/25, 11:04 AM Code 128
Format untuk ^SM instruction is:
^SMo,h,f,g,e,m
di mana:
^SM = Kod 128 Kod Bar
o= Orientasi
Nilai lalai: semasa ^FW tetapan
Other values:
N = Biasa
R = Rotated, 90 degrees clockwise
I = Inverted, 180 degrees
B = Read from Bottom Up, 270 degrees
h = Ketinggian Kod Bar
Nilai lalai: Value set by ^BY
Other values: 1 dot to 9999 dots
f = Print Interpretation Line
Nilai lalai: Y = Yes
Other value: N = No
NOTE: Intrepretation line can be printed in any available font by placing the instruction for the font directly before the bar code instruction.
g = Print Interpretation Line Above Code
Nilai lalai: N = No
Other value: Y = Yes
NOTE: Default changes to Yes in UCC Case Mode
e = UCC Check Digit
Nilai lalai: N = No
Other value: Y = Yes
m = Mode choices N, U, A, D
N Nilai lalai: N = No mode selected
U Other value: U = UCC Case Mode (^FD or ^SN statement must contain 19 numeric digits it can also contain valid alpha characters). Subset C using FNC1 values is automatically selected.
Excess digits (above 19) in ^FD or ^SN will be eliminated.
Below 19 digits in ^FD or ^SN adds zeros to right to bring count to 19. (This produces an invalid interpretation line.)
A Other value: A = Automatic Mode Effective for Version 16.3.0 The Automatic Mode analyzes the data sent and automatically determines the best packing method. Full ASCII Character Set can be used in the ^FD statement. Printer will determine when to shift subsets. A string of four or more numeric digits will cause automatic shift to subset C.
D Other value: D = New Mode (x.11.x and newer f/w) This new mode:
- Akan membenarkan berurusan dengan UCC/EAN dengan dan tanpa pengecam aplikasi berantai.
- Juga kod akan bermula dalam subset yang sesuai diikuti dengan FNC1 untuk menunjukkan kod bar UCC/EAN 128.
https://support.zebra.com/cpws/docs/zpl/code_128.htm
5/22/25, 11:04 AM Code 128
The printer will automatically strip out parenthesis dan ruang for encoding but print them in the human readable section.
The printer will automatically determine if a check digit is required, calculate it, and print it. Automatic sizing of the human readable.
Sample ZPL dan cetakan dalam Subset B lalai

Subset
Code 128 has three subsets of characters. There are 106 encoded printing characters in each set, and each character set can have up to three different meanings, depending on the character subset being used. The three Code 128-character subsets are referred to as:
- Subset A
- Subset B
- Subset C
Subset boleh dipilih dalam satu daripada dua cara.
- A special Invocation Code can be included in the field data (^FD) string associated with that bar code.
- Place the desired Start Code at the beginning of the field data. If no Start Code is entered, Subset B will be used.
Untuk menukar subset dalam kod bar, letakkan Kod Invocation yang sesuai pada titik yang sesuai dalam rentetan data medan. Subset baharu akan kekal berkuat kuasa sehingga ditukar dengan Kod Invocation yang sesuai. (Untuk example, in Subset C, a “>7” in the field data changes the Subset to A.) The table below shows the Code 128 Invocation Codes and Start Characters for the three subsets.
Jadual di bawah menunjukkan Kod Invokasi Kod 128 dan Aksara Mula untuk tiga subset. https://support.zebra.com/cpws/docs/zpl/code_128.htm 3/16
5/22/25, 11:04 AM Code 128
Kod 128 Watak Invokasi
Sample ZPL dan cetakan dalam Subset A
The >9 after the ^FD sets it to subset A
Sample ZPL dan cetakan dalam Subset C
The >; after the ^FD sets it to subset C
Sample ZPL bertukar daripada Subset C ke B ke A
https://support.zebra.com/cpws/docs/zpl/code_128.htm
5/22/25, 11:04 AM Code 128
^XA
^FO50,50^BY3^BCN,100,Y,N,N^FD>;382436>6CODE128>752375152^FS
^XZ
The >; starts the code in subset C, the >6 switches to subset B, the >7 switches to subset A. Consult the Invocation character table to see what invocations are used to switch from one subset to another.
Rules for Subsets A and C
Code 128 subsets A and C are programmed as pairs of digits, 00-99, in the field data string. In subset A, each pair of digits results in a single character being encoded in the barcode; in subset C, they are printed as entered. NOTE: Non-integers programmed as the first character of a digit pair (D2) are ignored. However, non-integers programmed as the second character of a digit pair (2D) invalidate the entire digit pair, and the pair is ignored. An extra, unpaired digit in the field data string just before a code shift is also ignored.
Rules for Subset B
Code 128 – subset B is programmed directly as ASCII text, except for values greater than 94 decimal and a few special characters: ^ > ~
Aksara ini mesti diprogramkan dengan menggunakan kod invocation.
Set Aksara Kod 128
https://support.zebra.com/cpws/docs/zpl/code_128.htm
5/22/25, 11:04 AM Code 128
Simbol UCC/EAN-128
Simbolologi yang dinyatakan untuk perwakilan data Pengecam Aplikasi ialah UCC/EAN-128, varian Kod 128, dikhaskan secara eksklusif kepada EAN International dan Uniform Code Council (UCC). Ia tidak bertujuan untuk digunakan untuk data diimbas pada tempat jualan di kedai runcit.
UCC/EAN-128 menawarkan beberapa advantages. Ia adalah salah satu simbolik yang paling lengkap, alfanumerik, satu dimensi yang terdapat pada hari ini. Penggunaan tiga set aksara berbeza (A, B dan C), memudahkan pengekodan set aksara 128 ASCII penuh. Kod 128 ialah salah satu simbol kod bar linear yang paling padat. Set aksara C membolehkan data berangka diwakili dalam mod ketumpatan berganda. Dalam mod ini, dua digit diwakili oleh hanya satu aksara simbol yang menjimatkan ruang berharga. Kod itu boleh digabungkan. Ini bermakna berbilang AI dan
https://support.zebra.com/cpws/docs/zpl/code_128.htm
5/22/25, 11:04 AM Code 128
medan mereka boleh digabungkan menjadi satu kod bar. Kod ini juga sangat dipercayai. Simbol Kod 128 menggunakan dua ciri semakan kendiri bebas yang meningkatkan kebolehpercayaan pencetakan dan pengimbasan.
Kod bar UCC/EAN-128 sentiasa mengandungi aksara bukan data khas yang dikenali sebagai fungsi 1 (FNC 1), yang mengikut aksara permulaan kod bar. Ia membolehkan pengimbas dan perisian pemprosesan untuk mendiskriminasi secara automatik antara UCC/EAN-128 dan simbol kod bar lain, dan seterusnya hanya memproses data yang berkaitan.
Kod bar UCC/EAN-128 terdiri daripada zon tenang terkemuka, aksara permulaan Kod 128 A, B atau C, aksara FNC 1, Data (Pengecam Aplikasi ditambah medan data), aksara semakan simbol, aksara henti dan zon senyap mengekori.
UCC/EAN, UCC/128 are a couple of ways you’ll hear someone refer to the code. This just indicates that the code is structured as dictated by the application identifiers that are used.
The SSCC stands for Serial Shipping Container Code. It’s formatted following the data structure layout for Application Identifier 00. See Application Identifier Table. It could be 00 which is the SSCC code. The customer needs to let us know what application identifiers are used for their barcode so we can help them.
Terdapat beberapa cara menulis kod untuk mencetak kod ke struktur Pengecam Aplikasi '00'.
Using ‘N’ for the mode (m) parameter ^BCo,h,f,g,e,m
Application Identifier 00 structure
^XA
^FO90,200^BY4^BCN,256,Y,N,Y,N^FD>;>80012345123451234512^FS
^XZ
>;>8′ menetapkannya kepada subset C, fungsi 1
'00' ialah pengecam aplikasi diikuti dengan '17 aksara', digit semak dipilih menggunakan 'Y' untuk parameter (e) untuk mencetak aksara ke-20 secara automatik.
anda tidak terhad kepada 19 aksara dengan mod ditetapkan kepada N
https://support.zebra.com/cpws/docs/zpl/code_128.htm 7/16
5/22/25, 11:04 AM Code 128
Using ‘U’ for the mode (m) parameter ^BCo,h,f,g,e,m
Application Identifier 00 structure
^XA
^FO90,200^BY4^BC,256,Y,N,,U^FD0012345123451234512^FS
^XZ
Memilih U memilih mod UCC Case bermakna anda perlu menggunakan tepat 19 aksara dalam ^FD, tidak lebih, tidak kurang….mesti 19 aksara.
Subset C menggunakan nilai FNC1 dipilih secara automatik.
Digit semak dimasukkan secara automatik.
Using ‘D’ for the mode (m) parameter (x.11.x and newer /w) ^SMo,h,f,g,e,m Application Identifier 00 structure
^XA
^FO50,200^BCN,150,Y,N,,D^FD(00) 1 0084423 7449200940^FS
^XZ
https://support.zebra.com/cpws/docs/zpl/code_128.htm 8/16
5/22/25, 11:04 AM Code 128
(0 at end of field data is a bogus character that is inserted as a place holder for the check digit the printer will automatically insert…by coincidence in this exampmaka digit semakan yang dikira secara automatik ialah 0 juga)
Subset C menggunakan nilai FNC1 dipilih secara automatik.
kurungan dan ruang boleh berada dalam data medan. '00' pengecam aplikasi, diikuti dengan 17 aksara, diikuti dengan pemegang tempat digit cek palsu.
Digit semak dimasukkan secara automatik. Pencetak secara automatik akan mengira digit semak dan memasukkannya ke dalam kod bar dan baris tafsiran.
Baris tafsiran juga akan menunjukkan kurungan dan ruang tetapi akan mengeluarkannya daripada kod bar sebenar.
Mencetak baris tafsiran dalam fon yang berbeza
With f/w version x.10.x or newer
^XA
^FO50,200^A0N,40,30^BCN,150,Y,N,Y^FD>;>80012345123451234512^FS
^XZ
The font command (^A0N,40,30) can be added and changed to alter the font and size of the interpretation line.
Dengan versi f/w lebih lama daripada x.10.x
^XA
^FO25,25^BCN,150,N,N,Y^FD>;>80012345123451234512^FS
^FO100,190^A0N,50,40^FD(00) 1 2345123 451234512 0^FS
^XZ
Medan teks yang berasingan perlu ditulis.
The interpretation line needs to be turned off.
^A0N,50,40 is the font and size selection for the separate text field.
You have to make sure you enter the correct periksa digit in the text field.
https://support.zebra.com/cpws/docs/zpl/code_128.htm 9/16
5/22/25, 11:04 AM Code 128
Mencipta medan teks yang berasingan membolehkan anda memformat baris tafsiran dengan kurungan dan ruang.
Format penghantaran biasa yang digunakan oleh beberapa peruncit utama: (saiz label 4 x 6)
Dalam ini ^SM exampformat telah mematikan baris tafsiran, parameter digit semak tidak didayakan, pengaturcara telah mengira digit semak dan telah menambahnya sebagai aksara ke-20 dalam data medan. Anda boleh memilih untuk meletakkan 'Y' bagi parameter digit semak dan masukkan hanya 19 aksara dalam data medan dan benarkan pencetak mengira dan memasukkan digit semak (aksara ke-20) secara automatik.
^XA
^LH0,00^FS
^FO25,20^A0,52,40^FDFROM:^FS
^FO25,80^A0,25,25^FDZEBRA TECH. CORP.^FS
^FO25,110^A0,25,25^FD333 CORP. WOODS PLWY^FS
^FO25,140^A0,25,25^FDVERNON HILLS, IL 60061^FS
^FO75,190^A0,30,30^FD(EXHIBIT D) ^FS
^FO270,0^GB3,220,3^FS
^FO300,20^A0,52,40^FDCARRIER:^FS
^FO300,70^A0,48,40^FDBudget PACKAGE EXPRESS^FS
^FO300,110^A048,40^FDPRO NUMBER 123456789^FS
^FO300,150^A0,48,40^FDB/L NUMBER 987654321^FS
^FO01,220^GB816,3,3^FS
^FO25,240^A0,52,40^FDTO:^FS
^FO95,230^A0,50,30^FDAcme CORPORATION^FS
^FO95,275^A0,50,30^FDC/O^FS
^FO95,320^A0,34,30^FDN & M TRANSFER^FS
^FO95,350^A0,34,30^FD630 MUTTARD ROAD^FS
^FO95,380^A0,34,30^FDNEENAH, WI 54956^FS
^FO400,220^GB4,200,4^FS
^FO440,250^A0,50,30^FDFOR:^FS
^FO440,300^A0,40,35^FDAcme #4040^FS
^FO440,335^A0,40,35^FD4002 SOUTH DORT HWY^FS
^FO440,370^A0,40,35^FDFLINT, MI 48507^FS
^FO01,420^GB816,3,3^FS
^FO25,430^AD^FD(420) SHIP TO POSTAL CODE^FS
^FO100,455^A0,42,50^FD(420) 54956^FS
^FO55,500^BY4,3^BC,110,N^FD>;>842054956^FS
^FO446,422^GB3,202,3^FS
^FO470,450^A0,30,22^FDPO#:^FS
https://support.zebra.com/cpws/docs/zpl/code_128.htm 10/16
5/22/25, 11:04 AM Code 128
^FO470,500^A0,30,22^FDORDER TYPE:^FS
^FO470,550^A0,30,22^FDDEPT:^FS
^FO650,450^A0,60,35^FD2397767757^FS
^FO650,510^A0,60,35^FDRO^FD
^FO650,570^F0,60,35^FD60,35^FD092^FS
^FO01,622^GB816,3,3^FS
^FO01,830^GB816,3,3^FS
^FO25,840^AD^FD(00) SERIAL SHIPPING CONTAINER^FS
^FO100,925^BC,276,N,^FD>;>800000123455555555558^FS
^FO100,865^A0,56,50^FD(00) 0 00 12345 555555555 8^FS
^PQ1
^XZ
Pengecam Aplikasi
PENGENALAN APLIKASI UCC/EAN
Pengecam Aplikasi ialah kod awalan yang digunakan untuk mengenal pasti makna dan format data yang mengikutinya (medan data).
Terdapat AI untuk pengenalan, kebolehkesanan, tarikh, kuantiti, ukuran, lokasi dan banyak jenis maklumat lain.
Untuk exampOleh itu, AI untuk nombor kelompok ialah 10, dan nombor kelompok AI sentiasa diikuti dengan kod kelompok alfanumerik tidak melebihi 20 aksara.
Pengecam Aplikasi UCC/EAN menyediakan standard terbuka yang boleh digunakan dan difahami oleh semua syarikat dalam rantaian dagangan, tanpa mengira syarikat yang pada asalnya mengeluarkan kod tersebut.
Jadual Pengecam Aplikasi UCC
|
Kandungan Data |
AI |
Plus The Following Data Structure |
|
Serial Spinggul Container Code (SSCC) |
00 |
tepat 18 digit |
|
Shipping Container Code |
01 |
tepat 14 digit |
|
Batch NumberS |
10 |
up to 20 alphanumerics |
|
Production Date (YYMMDD) |
11 |
tepat 6 digit |
|
Packaging Date (YYMMDD) |
13 |
tepat 6 digit |
|
Sell By Date (YYMMDD) |
15 |
tepat 6 digit |
|
Expiration Date (YYMMDD) |
17 |
tepat 6 digit |
|
Varian Produk |
20 |
tepat 2 digit |
|
Nombor Siri |
21 |
up to 20 alphanumerics |
|
HIBCC Quantity, Date, Batch and Link |
22 |
up to 29 alphanumerics |
|
Nombor Lot |
23* |
up to 19 alphanumerics |
|
Quantity Each |
30 |
|
|
Net Weight (Kilograms) |
|
310** tepat 6 digit |
https://support.zebra.com/cpws/docs/zpl/code_128.htm
5/22/25, 11:04 AM Code 128
|
Panjang, Meter |
|
311** tepat 6 digit |
|
Lebar atau Diameter (Meter) |
|
312** tepat 6 digit |
|
Kedalaman ( Meter) |
|
313** tepat 6 digit |
|
Kawasan (Meter Persegi) |
|
314** tepat 6 digit |
|
Isipadu (Liter) |
|
315** tepat 6 digit |
|
Isipadu (Meter Kubik) |
|
316** tepat 6 digit |
|
Berat Bersih (Paun) |
|
320** tepat 6 digit |
|
Nombor PO Pelanggan |
400 |
up to 29 alphanumerics |
|
Ship To (Deliver To) Location Code using EAN 13 or DUNS Number with leading zeros |
410 |
tepat 13 digit |
|
Bill To (Invoice To) Location Code using EAN 13 or DUNS Number with leading zeros |
411 |
tepat 13 digit |
|
Belian daripada |
412 |
tepat 13 digit |
|
Ship To (Deliver To) Postal Code within single postal authority |
420 |
up to 9 alphanumerics |
|
Ship To (Deliver To) Postal Code with 3-digit ISO Country Code Prefix |
421 |
3 digits plus up to 9 alphanumerics |
|
Roll Products – width, length, core diameter, direction and splices |
8001 |
tepat 14 digit |
|
Electronic Serial number for cellular mobile phone |
|
8002 hingga 20 abjad angka |
For date fields that only need to indicate a year and month, the day field is set to “00”.
* Plus one digit for length indication.
** Plus one digit for decimal point indication.
Chaining several application identifiers (x.11.x and later) FNC1 yang dipanggil oleh >8 dimasukkan tepat sebelum AI dua digit supaya pengimbas yang membaca kod akan melihat FNC1 dan mengetahui bahawa AI mengikuti. dengan parameter mod ditetapkan kepada A (automatik):
^XA
^BY2,2.5,193^FO33,400^BCN,,N,N,N,A^FD>;>80204017773003486100008535>8910001>837252^FS ^FT33,625^AEN,0,0^FD(02)04017773003486(10)0008535(91)0001(37)252^FS
^XZ
dengan parameter mod ditetapkan kepada U:
^XA
^BY3,2.5,193^FO33,200^BCN,,N,N,N,U^FD>;>80204017773003486>8100008535>8910001>837252^FS ^FT33,455^A0N,30,30^FD(02)04017773003486(10)0008535(91)0001(37)252^FS
^XZ
with mode parameter set to D*
https://support.zebra.com/cpws/docs/zpl/code_128.htm
5/22/25, 11:04 AM Code 128
^XA
^PON
^LH0,0
^BY2,2.5,145^FO218,343^BCB,,Y,N,N,D^FD(91)0005886>8(10)0000410549>8(99)05^FS ^XZ
D* : The following issue was corrected in 60.13.0.6 firmware – corrected problem printing EAN128 barcodes using Mode “D” when trying to print the last Application Identifier with an odd number of characters. The fix – Added in the capability for Mode D to accept odd numbers of data characters rather than trying to force an even number.
EAN -14
Berikut ialah 2 cara untuk menghasilkan Kod Bar EAN-14 menggunakan Kod 128
- You can use Zebra Designer and design the label and then print to file kepada view the code that is generated when you print an EAN14 Barcode.
- You can print EAN14 using the ^BC command. Here is more information about the ZPL command.
Although it may not have a ZPL command specifically for EAN 14 the meja above shows information about the 01 application identifier. It indicates that the data field must have exactly 14 characters, the first two will be 01 followed by 12 more characters.
The 01 identifies this as a EAN14 structure. The ZPL will look something like this:
^BCN,256,Y,N,^FD>;>801222222222222^FS
>;>8 diperlukan untuk menetapkan kod bar kepada subset C, fungsi 1 01 ialah pengecam untuk kod 14 aksara (EAN14, kod kontena penghantaran) Bekasample menggunakan dua belas 2 untuk data ….di sinilah anda akan meletakkan data anda sebagai ganti 2 ini
Lagi bekasamples
Berikut adalah beberapa sample compliant labels that use ucc/ean (ucc/128) barcodes.
Subset C, Function 1 is invoked by >;>8
Jika anda menghantar ^BC,110,N,,,U maka anda perlu menggunakan tepat 19 aksara dalam data filed dan anda tidak memerlukan >;>8 untuk menggunakan subset C, fungsi 1.
Di samples U tak ada. >;>8 digunakan untuk memanggil subset fungsi C 1 dan yang membolehkan pengguna memasukkan beberapa aksara yang tidak semestinya tepat 19 aksara.
Ini hanya dua sampbanyak label patuh yang terdapat di dunia nyata. Gunakan samples sebagai model untuk membantu dengan aplikasi ucc/ean (ucc/128).
Satu sample berasal dari JCPenney dan seorang lagi dari Kmart. Ini mungkin bukan piawaian semasa. Mereka adalah untuk tujuan demonstrasi sahaja.
JCPenney
^XA
^LH20,10^FS
https://support.zebra.com/cpws/docs/zpl/code_128.htm
5/22/25, 11:04 AM Code 128
^FO01,145^GB816,3,3^FS
^FO5,20^A0,52,50^FDFROM:^FS
^FO155,20^A0,34,31^FDZEBRA TECH. CORP.^FS
^FO155,52^A0,34,31^FD333 CORP. WOODS PKWY.^FS
^FO155,84^A0,34,31^FDVERNON HILLS, IL 60061^FS
^FO570,20^A0,69,48^FD#67890-0^FS
^FO5,163^A0,52,50^FDTO:^FS
^FO110,158^A0N,65,50^FDJ.C.PENNEY^FS
^FO528,159^A0N,87,62^FD#2473-7^FS
^FO120,217^A0N,36,32^FD1201 WEST OAKS MALL^FS
^FO120,252^A0N,36,32^FDHOUSTON, TX 77082^FS
^FO227,314^BY4^BC,104,N^FD>;>842077082^FS
^FO307,282^A0N,36,32^FD420 77082^FS
^FO01,424^GB816,3,3^FS
^FO01,642^GB816,3,3^FS
^FO01,642^GB816,3,3^FS
^FO25,662^A0,87,65^FDPO#:^FS
^FO160,662^A0N,90,70^FD35976757^FS
^FO510,662^A0N,87,65^FDSUB:^FS
^FO650,662^A0N,90,70^FD092^FS
^FO130,760^A0N,50,63^FDCARTON 07 OF 12^FS
^FO01,820^GB816,3,3^FS
^FO90,941^BC,256,N^FD>;>800000280280000000680^FS
^FO88,890^A0N,50,57^FD00 00 28028 000000068 0^FS
^PQ0,1,,N
^XZ
Kmart
^XA
^LH0,00^FS
^FO25,20^A0,52,40^FDFROM:^FS
^FO25,80^A0,25,25^FDZEBRA TECH. CORP.^FS
^FO25,110^A0,25,25^FD333 CORP. WOODS PLWY^FS
^FO25,140^A0,25,25^FDVERNON HILLS, IL 60061^FS
^FO75,190^A0,30,30^FD(EXHIBIT D) ^FS
^FO270,0^GB3,220,3^FS
^FO300,20^A0,52,40^FDCARRIER:^FS
^FO300,70^A0,48,40^FDROADWAY PACKAGE EXPRESS^FS
^FO300,110^A048,40^FDPRO NUMBER 123456789^FS
^FO300,150^A0,48,40^FDB/L NUMBER 987654321^FS
^FO01,220^GB816,3,3^FS
^FO25,240^A0,52,40^FDTO:^FS
^FO95,230^A0,50,30^FDKMART CORPORATION^FS
^FO95,275^A0,50,30^FDC/O^FS
^FO95,320^A0,34,30^FDN & M TRANSFER^FS
^FO95,350^A0,34,30^FD630 MUTTARD ROAD^FS
^FO95,380^A0,34,30^FDNEENAH, WI 54956^FS
^FO400,220^GB4,200,4^FS
^FO440,250^A0,50,30^FDFOR:^FS
^FO440,300^A0,40,35^FDKMART STORE #4040^FS
^FO440,335^A0,40,35^FD4002 SOUTH DORT HWY^FS
https://support.zebra.com/cpws/docs/zpl/code_128.htm 14/16
5/22/25, 11:04 AM Code 128
^FO440,370^A0,40,35^FDFLINT, MI 48507^FS
^FO01,420^GB816,3,3^FS
^FO25,430^AD^FD(420) SHIP TO POSTAL CODE^FS
^FO100,455^A0,42,50^FD(420) 54956^FS
^FO55,500^BY4,3^BC,110,N^FD>;>842054956^FS
^FO446,422^GB3,202,3^FS
^FO470,450^A0,30,22^FDPO#:^FS
^FO470,500^A0,30,22^FDORDER TYPE:^FS
^FO470,550^A0,30,22^FDDEPT:^FS
^FO650,450^A0,60,35^FD2397767757^FS
^FO650,510^A0,60,35^FDRO^FD
^FO650,570^F0,60,35^FD60,35^FD092^FS
^FO01,622^GB816,3,3^FS
^FO01,830^GB816,3,3^FS
^FO25,840^AD^FD(00) SERIAL SHIPPING CONTAINER^FS
^FO100,925^BC,276,N,^FD>;>800000123455555555558^FS
^FO100,865^A0,56,50^FD(00) 0 00 12345 555555555 8^FS
^PQ1,1,,N
^XZ
https://support.zebra.com/cpws/docs/zpl/code_128.htm
5/22/25, 11:04 AM Code 128
https://support.zebra.com/cpws/docs/zpl/code_128.htm
Dokumen / Sumber
![]() |
Pencetak Kod Bar ZEBRA 128 [pdf] Arahan BC, Kod 128, Kod 128 Pencetak Kod Bar, 128 Pencetak Kod Bar, Pencetak Kod Bar, Pencetak |
