Solutions MS-TP Programmable Touch Panel
Notis Hak Cipta
Semua kandungan manual ini, yang hak ciptanya dimiliki oleh syarikat kami tidak boleh diklon, disalin atau diterjemahkan tanpa kebenaran syarikat.
Spesifikasi produk dan maklumat yang dirujuk dalam dokumen ini adalah untuk rujukan sahaja. Kami boleh menukar, memadam atau mengemas kini sebarang kandungan pada bila-bila masa dan tanpa notis terlebih dahulu.
Notis FCC
Produk ini mematuhi Bahagian 15 Peraturan FCC. Operasi tertakluk kepada dua syarat berikut:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause undesired operation.delete, or update any content at any time and without prior notice.
Produk ini telah diuji dan didapati mematuhi had untuk peranti digital Kelas A, menurut Bahagian 15 Peraturan FCC. Had ini direka bentuk untuk memberikan perlindungan yang munasabah terhadap gangguan berbahaya dalam pemasangan kediaman. Peralatan ini menjana kegunaan dan boleh memancarkan tenaga frekuensi radio dan, jika tidak dipasang dan digunakan mengikut arahan, boleh menyebabkan gangguan berbahaya kepada komunikasi radio. Walau bagaimanapun, tiada jaminan bahawa gangguan tidak akan berlaku dalam pemasangan tertentu. Jika peralatan ini menyebabkan gangguan berbahaya kepada penerimaan radio atau televisyen, yang boleh ditentukan dengan mematikan dan menghidupkan peralatan, pengguna digalakkan untuk cuba membetulkan gangguan dengan satu atau lebih daripada langkah berikut:
- Arahkan semula atau letakkan semula antena penerima.
- Tingkatkan pemisahan antara peralatan dan penerima.
- Sambungkan peralatan ke dalam alur keluar pada litar yang berbeza daripada yang disambungkan kepada penerima.
- Rujuk peniaga atau juruteknik radio/televisyen yang berpengalaman untuk mendapatkan bantuan.
Kelas A ITE
Kelas A ITE ialah kategori semua ITE lain yang memenuhi had ITE kelas A tetapi bukan had ITE kelas B. Peralatan tersebut tidak seharusnya dihadkan dalam penjualannya tetapi amaran berikut hendaklah disertakan dalam arahan penggunaan:
Amaran
Mengendalikan peralatan ini dalam persekitaran kediaman boleh menyebabkan gangguan radio.
EC Compliance Statement
(Kelas A)
Produk ini dengan ini disahkan mematuhi keperluan yang ditetapkan dalam Arahan Majlis mengenai Anggaran undang-undang Negara Anggota yang berkaitan dengan Arahan Keserasian Elektromagnet 2014/30/EU.
Perlindungan Lonjakan
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of
your equipment..
Berhati-hati
The network cable connection method required for this product is direct connection. Please do not cross-connect.
pengenalan
The MS-TP programmable touch panel, designed for automated office systems, multimedia rooms, and smart homes, features a configurable interactive user interface and intelligent networking capabilities. This wall-mounted panel, compatible with standard 86-box installations, includes a 720×720 capacitive touchscreen and one RS-232 serial port. It supports diverse applications across industries, including multimedia conference rooms, multi-functional halls, training centers, showrooms, broadcasting studios, and industrial automation.
Ciri-ciri Utama
- ARM Cortex-A55 architecture 1.8Ghz
- Android 11.0 system, 4GB DDR4 RAM, 32GB EMMC Flash
- 4 inch 720*720 (1:1) resolution, capacitive touch screen, standard 86 box wall-in design
- Dual-mode operation – functions as either a touchscreen central control or a user terminal.
- Customizable interface and function configuration through PC software
- Mematuhi protokol komunikasi rangkaian standard industri (TCP/IP, Http, UDP, Websoket)
- Standard 1Gbps network port
- Dual power supply mode, supporting POE or an independent DC power supply
Kandungan Pakej
- A1x Programmable Touch Panel (Wall-in)
- 1x 3pin-3.81mm Phoenix Connectors (male)
- 1x 24V/1A Multinational Power Supply (2pin-3.81mm Phoenix Connector)
- 1x Pendakap Pemasangan Dinding
- 2x Bracket Fixing Screw
- 1x Manual Pengguna
Spesifikasi
| Teknikal | |
| CPU: | ARM Cortex-A55 1.8GHz |
| Sistem pengendalian: | Android 11 |
| RAM: | 4GB DDR4 RAM |
| Memori kilat: | Denyar EMMC 32GB |
| Resolusi: | 720*720 |
| Jenis sentuhan: | Skrin Sentuh Kapasitif |
| Perlindungan ESD: | IEC 61000-4-2: ±8kV (Nyahcas celah udara) & ±4kV (Nyahcas kenalan) |
| Sambungan | |
| RS232: | 1x Penyambung Phoenix 3-pin |
| LAN/POE: | 1x Port RJ10 Ethernet 100M/1000M/45M Standard, menyokong fungsi POE |
| KUASA: | 1x 2-pin Phoenix Connectors, for power supply or POE |
| DEBUG: | 1x Micro USB, system debugging port |
| mekanikal | |
| Perumahan: | Front Pane: Touch Screen; Frame: A uminum A oy Rear Case: P astic |
| warna: | Front Pane: Back; Frame: Gray Rear Case: White |
| Dimensi: | 86mm (L) x 86mm (W) x 44mm (D) |
| Berat: | 192g |
| Bekalan kuasa: | 24V DC/1A atau POE |
| Penggunaan kuasa: | 5W |
| Suhu operasi: | 0°C ~ 40°C / 32°F ~ 104°F |
| Suhu penyimpanan: | -4 ° F ~ 140 ° F / -20 ° C ~ 60 ° C |
| Kelembapan operasi: | 20% ~ 80% (kelembapan relatif, tidak pemeluwapan) |
| Kelembapan penyimpanan: | 10% ~ 90% (kelembapan relatif, tidak pemeluwapan) |
Kawalan dan Fungsi Operasi
| Nombor | Nama | Penerangan Fungsi |
| 1 | Skrin sentuh | Capacitive touch screen. The user contro interface can be configured through the configuration too . |
|
2 |
butang RESET |
Reboot: After the device boots up, press and ho d the RESET button for more than 1s
less than 5s, then release it, the device wi reboot. The device won’t upload the user projects after rebooting. Reset: After the device boots up, press and ho d the RESET button for more than 5 seconds, then release it, the device writes the user configuration information. The IP wi be restored to the default settings (IP address: 192.168.0.101, subnet mask: 255.255.0.0), the ogin password of the management page wi be initialized to “admin”, the device time wi be initialized to automatic acquisition mode, but user projects won’t be deleted by factory initialization. |
| 3 | Butang POWER | Digunakan untuk skrin mati atau bangun. |
| 4 | Port USB | Port USB mikro. Port terpelihara untuk penyahpepijatan sistem. |
|
5 |
Port LAN/PoE |
Standard 10M/100M/1000M Ethernet RJ45 port with default auto-negotiated speed for device connection, projects uploading & down oading, network communication and debugging. By default, the DHCP function of the contro pane is disabled, and the IP setting is as follows: IP address: 192.168.0.101, subnet mask: 255.255.0.0 |
| 6 | Port kuasa | The power input port (2-PIN phoenix connectors), used for connecting with externa 24V DC power supply. |
|
7 |
Pelabuhan RS232 |
Programmable RS232 seria port, which is a 3-pin phoenix connector (ma e), compliant with RS232 communication protocol. The pin-outs of the RS232 port are PIN1 for TX, PIN2 for GND, and PIN3 for RX. |
Arahan Pemasangan
This wall-in touch panel can be mounted on a standard 86 wall box, the mounting steps are as follows:
Langkah 1: Install the included wall mounting bracket onto the 86 wall box and fasten it with 2 screws.
Langkah 2: Align the back of the touch panel with the slots of the wall bracket and push it in. Press the aluminum edge of the touch panel to ensure that the buckles are in place, and the installation is complete.
To remove the mounted touch panel, insert a screwdriver into the two holes indicated by the arrows and pry the machine out of the bottom box.
Soalan Lazim
Q: Can I use this touch panel without surge protection?
A: While surge protection is highly recommended, the touch panel can function without it. However, using surge protection will extend the equipment's lifespan.
Q: What type of network connection is required for this product?
A: The product requires a direct network cable connection method. Do not cross-connect the network cables.
Dokumen / Sumber
 |
Solutions MS-TP Programmable Touch Panel [pdf] Panduan Pengguna MS-TP Programmable Touch Panel, MS-TP, Programmable Touch Panel, Touch Panel, Panel |