SAL PIXIE Aircon Controller User Guide

SAL PIXIE Aircon Controller

Kata pengantar
IMPORTANT: IN THE INTEREST OF PRODUCT PERFORMANCE AND SAFETY, PLEASE READ THESE INSTRUCTIONS AND THE WARRANTY BEFORE INSTALLING THE PRODUCT.

Produk SAL direka bentuk mengikut semua Piawaian Antarabangsa dan Australia yang wajib, yang memerlukan pemasangan mengikut AS/NZS3000 oleh pemasang bertauliah serta pembersihan dan penyelenggaraan peralatan secara tetap. Produk dijual mengikut arahan berikut dan terma dan syarat jualan standard SAL, boleh didapati melalui www.sal.net.au.

Disebabkan oleh kemas kini produk dan maklumat yang berterusan, data produk yang diperoleh daripada sal.net.au tidak akan menjadi sebahagian daripada sebarang kontrak dan atau jaminan prestasi teknikal melainkan disahkan secara bertulis secara bertulis oleh SAL pada masa pesanan. Lukisan rangka wayar produk dalam dokumen ini bertujuan untuk tujuan ilustrasi sahaja dan mungkin berbeza daripada produk fizikal akhir. Arahan pemasangan tertakluk kepada perubahan tanpa notis terlebih dahulu.

Pengenalan Produk

PIXIE Aircon Controller is designed to control Daikin ducted aircons, with simple wiring to indoor units. Eachair conditioningn indoor unit requires one PIXIE Aircon Controller.

Ilustrasi produk

Ciri-ciri Produk

• Control Daikin ducted aircons (check section 4.1 for compatibility list)
• Pendawaian mudah
• Can co-exist with one Daikin official wired remote controller
• Physical buttons to facilitate commissioning and testing
• In-built LED indicators for clear status indication

Pakej Termasuk

• PIXIE Aircon Controller – DK * 1
• Panduan Mula Pantas * 1

*All drawings shown are for illustrative purposes only, actual product may vary due to product enhancement.

Spesifikasi

Pemasangan dan Pendawaian

Daikin Indoor Unit Compatibility**
Please confirm the compatibility before installation. Compatible with (as of Nov 2025):

Premium Inverter Ducted,
FDYA 71/85/100/125/140/160 AV19, FDYQ 180/200/250 LCV1

Inverter Ducted,
FDYAN 50/60/71/85/100/125/140/160 AV1, FDYQN 180/200 LCV1, FDYQN250LBV1

Slimline Ducted,
FBA 50/60 BAVMA, FBA 71/85/100/125/140 BVMA

Bulkhead System,

• FDYBA 25/35/50/60/71 AV1
• **This list is compiled as of Oct 2025 and subject to change without prior notice.

Persediaan

Please make sure theair conditioningn system operates properly with its official wired remote controller.

Pemasangan

1. Turn OFF the electricity supply to the air conditioner.
2. Connect the PIXIE Aircon Controller to the indoor unit as per the wiring diagram (There is no polarity requirement for the P1 and P2 terminals).
3. Switch ON the electricity supply to the aircon, allow the aircon wired remote controller to initiate, wait until it displays and operates as normal.
4. Check the LED indicators on the PIXIE Aircon Controller. When the top indicator (Bluetooth) is white, and the Stat indicator is in solid blue, this controller is ready for commissioning.
5. Add this PIXIE Aircon Controller to the PIXIE or PIXIE PLUS App, and enjoy the smart.

Operasi

Tetapkan Butang
Single click: Turn ON/OFF the aircon. When the aircon is OFF, the Mode LED indicator is flashing in white. When the aircon is ON, the Mode LED indicator is lit in a solid color.

Quickly 4 Clicks: The PIXIE Aircon Controller enters pairing mode. In this mode, the top LED indicator (Bluetooth) will flash in blue and white; it will stop flashing when a pairing process is finalised or in 30 seconds, whichever occurs earlier.
Quickly 9 Clicks: Reset the PIXIE Aircon Controller to factory default. The top LED indicator (Bluetooth) will flash in blue and white for 3 seconds, then stay on white.

Ctrl Button (Control Button)The 
Ctrl Button (control button) is only functional when the aircon is ON.
Single click: Switch the aircon to the next mode, cycling through COOL -> HEAT -> DRY -> FAN.

Suis DIP
Please set to OFF for most applications.

Penunjuk LED

Cara memuat turun Aplikasi

• Scan the QR code or go to the App Store (IOS) or Google Play (Android) to download the free PIXIE app to your smartphone.
• IOS: Requires IOS 6.0 or later. Compatible with iPhone, iPad,a nd iPod touch
• Android: Requires Android 4.4 or above; devices must support Bluetooth 4.0
• Spesifikasi di atas adalah untuk rujukan sahaja dan mungkin berbeza tanpa notis terlebih dahulu.

Waranti

In accordance with SAL’s standard terms and conditions of sale, SAL warrants this product to be free from defects in materials and or workmanship for a period as stated below for goods not subject to incorrect installation, maintenance, operation, mishandling, environmental, unauthorised modification,s or electrical operating conditions outside the nominated product specification as detailed in these installation instructions.

Manfaat kepada anda yang diberikan oleh waranti ini adalah tambahan kepada hak dan remedi lain yang anda miliki di bawah undang-undang. Barangan kami disertakan dengan jaminan yang tidak boleh dikecualikan di bawah Undang-undang Pengguna Australia. Anda berhak mendapat penggantian atau bayaran balik untuk kegagalan besar dan pampasan untuk sebarang kerugian atau kerosakan lain yang munasabah. Anda juga berhak untuk mendapatkan barangan yang dibaiki atau diganti jika barangan tersebut gagal dalam kualiti yang boleh diterima dan kegagalan itu tidak membawa kepada kegagalan besar.

Tempoh jaminan – Penggunaan kediaman (12) bulan, Penggunaan komersial (12) bulan

Bagaimana untuk membuat tuntutan?

• Step #1 – Within 30 days of the fault discovery, please contact the original place of the SAL product purchase during standard (local) business hours, with the following information: (a) proof of purchase,e (b) description and quantity of the claimed fault, and (c) address of installation. (d) operating hours of the product.
• Step #2 – It is then the responsibility of the original place of product purchase to report the matter to SAL after-sales.;

• Langkah #3 – Setelah semulaview of your claim and if the product is required to be returned to SAL for technical evaluation, then at the owner’s expense,e the product must be returned to SAL as per the above-nominated locations.
• Step #4 – Pending the evaluation, the claim will be validated, resulting in the product being repaired or replaced with the same or best equivalent product at the discretion of SAL, or rejected if the product fault was found to be caused by conditions beyond the responsibility ofSAL’sL warranty obligations. Consideration of installation, product removal, return freight, and or testing feesise not the responsibility of SAL.

Soalan Lazim