Saitake STK-7052PD Multi Function Game Controller User Guide

Saitake STK-7052PD Multi Function Game Controller

Spesifikasi

• Model Number: STK-7052PD
• Product Name: Multi-Function Game Controller
• Jenis Sambungan: Wayarles / Berwayar
• Dimensi Produk: 155 x 110 x 60 mm
• Berat Produk: 305g
• Power Supply: Built-in battery or USB host-powered
• Kapasiti Bateri: 1000mAh
• Jenis Bateri: Bateri Lithium-ion
• Input Power Rating: DC5V, 1000mA
• Pengecasan Semasa: 5V 600mA
• Masa Pengecasan: 2.50 jam
• Negara Pengeluaran: China
• Frequency Band: 2.402 to 2.480Mhz
• Transmission Power: Less than 3dBm EIRP
• Reka bentuk dan spesifikasi tertakluk kepada perubahan tanpa notis.

Design and specifications are subject to change without notice. Please read the following precautions before use

• This product contains inter changeable parts. Keep out of reach of children under 3 years old.
• Do not use the product near open flames.
• Jangan dedahkan produk kepada cahaya matahari langsung atau suhu tinggi.
• Jangan letakkan produk dalam persekitaran yang lembap atau berdebu.
• Jangan jatuhkan atau letakkan produk kepada kesan yang kuat.
• Jangan sentuh port USB secara langsung, kerana ia boleh menyebabkan kerosakan.
• Jangan bengkokkan atau tarik kabel secara paksa.
• Bersihkan dengan kain kering yang lembut.
• Jangan gunakan petrol, nipis atau pelarut kimia lain.
• Jangan buka, baiki atau ubah suai produk itu sendiri.
• Do not use the product for purposes other than its intended use. We arnot responsible for any accidents or damage caused by misuse.
• Jangan melihat terus ke dalam pancaran cahaya. Ia boleh membahayakan mata anda.

Kandungan Pakej 

Arahan Komponen

1. Skrin Paparan
2. -/Butang PILIH
3. Tongkat Kiri (LS)
4. Jalur Cahaya RGB
5. Butang TURBO
6. D-Pad
7. Butang RUMAH
8. Butang +/MULA
9. Butang ABXY
10. Jalur Cahaya RGB
11. Butang Tangkapan Skrin PrtSc
12. Tongkat Kanan (RS)
13. Butang HIDUP / MATI
14. Butang L1
15. Butang L2
16. Pengecasan TYPE-C & Port Data
17. Butang R1
18. Butang R2
19. Pengecasan & Kabel Data
20. Tahap Pencetus Kiri
21. Butang Belakang Kiri
22. Bicu Fon Kepala
23. Tahap Pencetus Kanan
24. Butang Belakang Kanan
25. Port Pengecasan
26. Tetapkan semula Lubang

Power On / Off / Power 

• Power On : Move the toggle switch to the ON position. The RGB light bar on the game controller will turn on, and the display screen will show the startup animation before entering the standby reconnecting interface.
• Power Off: Move the toggle switch to the OFF position. The RGB light bar on the game controller will turn off, and the controller will power off after the display screen shuts down.
• Mod jimat tenaga:
  1. If pairing is not successfully completed within 2 minutes in power-on pairing mode, the controller will shut down automatically.
  2. If reconnection is not successfully completed within 60 seconds in power-on reconnection mode, the controller will shut down automatically.
  3. If there is no operation on the controller for more than 15 minutes in successfully connected mode, the controller will also shut down automatically.

Kaedah Pengecasan

1. Connect the charging base with A-C cable to AC adapter.
2. Put the controller to charging base, the controller will start charging automatically.
   • indicate the charging status
   • indicate the charged full
3. Charging specificate:
   • Type-C port: 5V 600mA Charging Base: Input: 5V 1A Max Output: 5V 600mA

Kaedah Penyambungan

1. Android \ iOS System Connecting:
   1. Mode Chosen: After powering on the controller, press and hold the HOME button with 3 second into “Setting panel”, select “Connected Mode”, select “PHONE” and confirm with press A button, controller will reboot automatically.
   2. Into Pairing Status: Press and hold the HOME button with 3 second into “Setting panel” while controller power on, select “Pair” and confirm with press A button, the controller will automatically turn to the pairing status wait for connect.
   3. Enable Bluetooth on your device, scan and find the Bluetooth name (Xbox Wireless Controller), then tap to connect the controller.
   4. After successful Bluetooth connection, the controller will vibrate for 1 second as a prompt and display the icon indicate pairing successful.
   5. Reconnect: Press the HOME button to power on controller; it will reconnect automatically.
2. PC System Connecting:
   1. Mode Chosen: After powering on the controller, press and hold the HOME button for 5 seconds into “Setting panel”, select “Connected Mode”, select “PC” and confirm with press A button; the controller will reboot automatically.
   2. Into Pairing Status: Press and hold the HOME button with 3 second into “Setting panel” while controller power on, select “Pair” and confirm with press A button, the controller will automatically turn to the pairing status wait for connect.
   3. Enable Bluetooth on your device, scan and find the Bluetooth name (Xbox Wireless Controller), then tap to connect the controller.
   4. After successful Bluetooth connection, the controller will vibrate for 1 second as a prompt and display the icon to indicate pairing successful.
   5. Reconnect: Press the HOME button to power on controller, it will reconnect automatically
3. Receiver Connecting: For PC Computer
   1. Mode Chosen: After powering on the controller, press and hold the HOME button with 5 second into “Setting panel”, select “Connected Mode”, select “Receiver” and confirm with press A button, controller will reboot automatically.
   2. Into Pairing Status: Press and hold the HOME button with 5 second into “Setting panel”, select “Pair” and confirm with press A button, the system will automatically turn to the pairing interface.
   3. Insert the receiver into the USB port of computer. Press and hold the pairing button on the receiver for about 1 second.The indicator light on the receiver will flash rapidly wait for connect.
   4. After successful Bluetooth connection, the controller will vibrate for 1 second as a prompt and display the icon indicate pairing successful.
   5. Reconnect: Press the HOME button to power on controller, it will reconnect automatically.
4. Wired Connect PC Controller Mode:
   1. Insert the C connector of the A-C cable into the controller’s data port and the A connector into a USB port on the PC computer.
   2. Move the toggle switch to the ON position. The RGB light bar on the game controller will turn on, and the display screen will show the startup animation before entering the standby reconnecting interface.
   3. After successful connection, the controller will vibrate for 1 second as a prompt and display the icon indicate pairing successful.
   4. Press the -/SE & +/ST both buttons to switch X-Input to D-Input alternately.
5. N-Switch Console Connecting:
   1. Mode Chosen: After powering on the controller, press and hold the HOME button with 5 second into “Setting panel”, select “Connected Mode”, select “SW” and confirm with press A button, controller will reboot automatically.
   2. Into Pairing Status: Press and hold the HOME button with 3 second into “Setting panel” while controller power on, select “Pair” and confirm with press A button, the controller will automatically turn to the pairing status wait for connect.
   3. Turn on your SWITCH console, go to Controllers → Change Grip/Order → Pair New Controllers.
   4. After successful Bluetooth connection, the controller will vibrate for 1 second as a prompt and display the icon indicate pairing successful.
   5. Reconnect: Press the HOME button to power on controller, it will reconnect automatically.
6. P4 Controller Mode:
   1. After powering on the controller, insert the C connector of the A-C cable into the controller’s data port and the A connector into a USB port on the PS4 console.
   2. Press the HOME button to pair. The controller vibrates for 1 second to indicate successful pairing.
   3. Unplug the data cable and press the HOME button shortly to reconnect via Bluetooth.
   4. Reconnect: Press the HOME button to power on controller, it will reconnect automatically.

Lebih Banyak Fungsi

RGB Lighting Switch

1. While charging with the charge base, touch the icon to close the rgb lighting.
2. How to change RGB lighting effect:
   1. After powering on the controller, press and hold the HOME button with 3 seconds into “Setting panel”, select “lighting pattern”, then you can select the rgb lighting style and confirm with press A button, the rgb light will changed automatically.

Tetapkan semula

1. If the controller buttons become unresponsive / stuck, use a small object such as a SIM ejector tool to press the Reset button located in the small round hole (Reset hole) on the back of the controller. Alternatively, switch the controller to the OFF position to turn it off.
2. With the controller powered on, press and hold the HOME button to enter the menu. Select ” Reset “, then press and hold the A button for 3 seconds. The controller will restart, TURBO and MACRO settings will be erased, volume and brightness will be restored to default, and pairing information will be cleared.

Arahan Penentukuran Pengawal

• With the controller powered off, press and hold the “Y” and “B” buttons. While holding, slide the switch to the ON position to power it on. The red and blue lights will flash alternately at a rate of 2 times per second, indicating calibration mode.
• Rotate both the left and right sticks 2 to 3 full circles with normal strength and speed. Press bothtrigger buttons (L2 / R2) fully 2 to 3 times in linear mode.Place the controller flat on a surface, then press the “+ / ST” button. Once the light stops flashing andthe controller returns to the main screen, the calibration is complete.

Changeable Thumb Sticks

• The default thumb sticks on the game controller feature a short travel height (4.5mm). The package includes an additional pair of tall thumb sticks (7.0mm) as a gift, and they are inter changeable.
• Replacement Method: Pull the original thumb stick upward firmly to remove it, then align the new thumb stick with the slot and press down to install.

Penyata FCC

Peranti ini mematuhi Bahagian 15 Peraturan FCC. Operasi tertakluk kepada dua syarat berikut:

1. Peranti ini mungkin tidak menyebabkan gangguan berbahaya, dan
2. peranti ini mesti menerima sebarang gangguan yang diterima, termasuk gangguan yang boleh menyebabkan operasi yang tidak diingini.

NOTA 1:
Peralatan ini telah diuji dan didapati mematuhi had untuk peranti digital Kelas B, menurut bahagian 15 Peraturan FCC. Had ini direka bentuk untuk memberikan perlindungan yang munasabah terhadap gangguan berbahaya dalam pemasangan kediaman. Peralatan ini menjana, menggunakan dan boleh memancarkan tenaga frekuensi radio dan, jika tidak dipasang dan digunakan mengikut arahan, boleh menyebabkan gangguan berbahaya kepada komunikasi radio. Walau bagaimanapun, tiada jaminan bahawa gangguan tidak akan berlaku dalam pemasangan tertentu. Jika peralatan ini menyebabkan gangguan berbahaya kepada penerimaan radio atau televisyen, yang boleh ditentukan dengan mematikan dan menghidupkan peralatan, pengguna digalakkan untuk cuba membetulkan gangguan dengan satu atau lebih daripada langkah berikut:

• Arahkan semula atau letakkan semula antena penerima.
• Tingkatkan pemisahan antara peralatan dan penerima.
• Sambungkan peralatan ke alur keluar pada litar yang berbeza daripada litar yang disambungkan kepada penerima.
• Rujuk pengedar atau juruteknik radio/TV yang berpengalaman untuk mendapatkan bantuan.

NOTA 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Pengisytiharan Kepatuhan EU

• Hereby declares that the product is in conformity with the essential requirements and other relevant provisions of the following EU directives and regulations:
• Arahan Peralatan Radio (RED) 2014/53/EU
• Arahan EMC 2014/30/EU
• RoHS Directive 2011/65/EU and (EU) 2015/863 – compliant with Restriction of Hazardous Substances Directive
• REACH Regulation (EC) No. 1907/2006 – compliant with Registration, Evaluation, Authorisation and Restriction of Chemicals
• The product complies with the applicable essential requirements of health, safety, and environmental protection as set out in the above directives.
• The CE marking affixed to this product signifies its compliance with all applicable EU legislation.
• Manufacturer: SHENZHEN SAITAKE ELECTRONIC CO., LTD
• Address: Room 301, Huayong Building ， No. 1 Dongshangang Road, Gushu Community, Xixiang Subdistrict, Bao’an District, Shenzhen 518000 Guangdong Province, China Date: 26/05/2026

Menyelesaikan masalah

Mod Penjimatan Kuasa

• If pairing is not successfully completed within 2 minutes in power-on pairing mode, the controller will shut down automatically.
• If reconnection is not successfully completed within 60 seconds in power-on reconnection mode, the controller will shut down automatically.
• If there is no operation on the controller for more than 15 minutes in successfully connected mode, the controller will also shut down automatically.

Sambung semula

• Press the HOME button to power on the controller; it will reconnect automatically.