RunLessWire Electrical Switch Installation Kit
Langkah keselamatan am
- Kakitangan yang berkelayakan: Work on electrical systems in the vehicle should only be carried out by persons with the appropriate electrical engineering qualifications.
- Putuskan sambungan bateri: Before starting any work on the vehicle’s electrical system, it is essential to disconnect the negative terminal of the vehicle battery in order to de-energize the system and prevent short circuits.
- Maklumat pengilang: Always follow the specific instructions and safety instructions of both the switch manufacturer and the vehicle manufacturer.
- Insulated tools: Use insulated tools whenever possible, especially if you need to work near live components.
- Persekitaran kerja: Provide adequate lighting and do not work in damp conditions, as water and electricity are a dangerous combination.
Pemasangan dan kabel
- Suitable components: Make sure that the switch and all connecting components used are suitable for the specific vehicle model and intended application and comply with the relevant EU directives (e.g. E-approval).
- Perlindungan litar: The new circuit must be additionally secured to prevent overloads. Use a suitable fuse holder (e.g. blade fuse holder) with the correct amp rating for the connected load.
- Penghalaan kabel: Plan cable routing carefully. Route cables along the safest and shortest route, avoiding sharp edges, moving parts, or hot areas (such as the engine compartment). Use existing ducts or grommets to protect the cables.
- Sambungan selamat: Use high-quality connections such as ferrules or heat shrink tubing to create a permanent connection and prevent wear or accidental loosening.
- Penandaan: Label or mark the wires (e.g. with colored tape) to facilitate future maintenance or troubleshooting.
Pengujian dan pentauliahan
- Ujian fungsi: After the installation is complete, carefully test the operation of the switch and the entire circuit before fully restarting the vehicle.
- Pemeriksaan berkala: Regularly inspect the installation for signs of damage, corrosion, or loose connections.
Soalan Lazim
Bagaimanakah cara saya menyelesaikan masalah jika produk tidak berfungsi?
If the product is not working, first check the power supply and connections. Refer to the troubleshooting section in the user manual for specific steps.
Bolehkah saya memasang produk di luar rumah?
It is recommended to install the product indoors to protect it from environmental elements and ensure longevity.
Dokumen / Sumber
 |
RunLessWire Electrical Switch Installation Kit [pdf] Arahan Electrical Switch Installation Kit, Switch Installation Kit, Installation Kit |