QANBA RUBY Arcade Controller Instruction Manual

QANBA RUBY Arcade Controller

Lagenda

1. Suis keserasian
2. Click Switch
3. Tukar Mod
4. Penunjuk Kuasa
5. Butang Rumah
6. Port kabel USB-C
7. LED Turbo
8. MF LED
9. Butang Turbo
10. Butang MF
11. Butang belakang
12. Butang mula
13. Butang tindakan
14. Dongle USB
15. Butang set semula

Operasi Produk

Menyambung ke Peranti Hos

Connect to a PC, mobile phone, or other devices

Sambungan Berwayar

• Pastikan peranti dihidupkan.
• Connect the USB-C cable (A) to the device (the R1 power indicator will light up).
• Use the Compatibility Switch (1) to select Xinput (default), Android, or Dinput mode.

Menyambung ke Peranti Hos

Connect to a PC, mobile phone, or other devices

Sambungan Tanpa Wayar

• Pastikan peranti dihidupkan.
• Insert the USB Dongle (14) into the device.
• Use the Compatibility Switch (1) to select Xinput (default), Android, or Dinput mode.
• Press the Home Button (5) to power on and reconnect to the USB Dongle.
  • Smart TV / PC / Laptop / Tablet / Mobile Phone / TV Box
  • Ordinator mudah alih
  • PC
  • Smart TV/PC/ Laptop/Tablet
  • TV inteligente/PC

Repairing the Controller with the USB Dongle

• If the connection is lost or the USB Dongle (14) is replaced, press and hold USB Dongle button (B) on the USB Dongle (14) and insert it into the USB port of the host device.
• After removing the USB Dongle (14), reinsert it into the USB port of the host device without pressing USB Dongle button (B) again to complete pairing with the powered-on Ruby controller.

Nota:
If the Ruby controller does not need to be paired with the USB Dongle (14) again, do not press and hold the USB Dongle button (B) on the USB Dongle (14) when plugging in or removing the receiver.

Sambungkan Peranti

Kuasa LED

Sambungan Kabel USB

• Connect the USB Type‑C to USB Type‑A cable (A) to the USB-C cable port (6) for power. The power indicator (4) will light up.
• When the battery is low, the power indicator (4) flashes slowly to indicate charging after connecting the USB Type‑C to USB Type‑A cable (A) to the USB-C cable port (6) for power. The indicator remains solid once fully charged.

Mod Sambungan Wayarles 2.4G

• Press the HOME button (5) to power on and start searching. The power indicator (4) will flash. Once pairing with the USB Dongle (14) is successful, the indicator will remain solid.
• When using the R1 device, the power indicator (4) will flash to indicate a low battery and that charging is required.

Nota: Do not connect the USB cable in 2.4G wireless mode; otherwise, the device will switch to USB cable mode by default. The device will automatically power off if no connection is made within 2 minutes of turning on, or if there is no operation within 10 minutes after a successful connection.

USB Dongle (14) Indicator

In 2.4G wireless connection mode: 

• The indicator on the USB Dongle (14) flashes while searching and stays lit when pairing is successful.
• The indicator is off when the USB Dongle (14) is not paired.

RESET Button (15)

1. Press the RESET button (15) to power on the device.
2. Press the RESET button (15) to restore the Ruby controller from update mode to normal controller mode.

BACK/C Mode Selection

• When the Click switch (2) is set to the Back position, the Back button (11) is enabled (default), and the Action Button C (13) is disabled.
• When the Click switch (2) is set to the C position, the Action Button C (13) is enabled, and the Back button (11) is disabled.

MODE (Joystick Direction Mode Selection)

• When the mode switch (3) is set to the DP position, D-Pad (DP) mode is enabled (default).
• When the mode switch (3) is set to the LS position, Left Stick (LS) mode is enabled.

Nota: Some retro emulators only support the LS function. If the joystick does not respond, please switch the direction mode.

Butang TURBO

• Each of the A/B/X/Y/R1/L1/R2/L2/R3/L3 action buttons (13) can be switched among three turbo modes:
• Turbo Off (default) – LED (7) Off
• Press Turbo – LED (7) flashes red while the button is pressed
• Auto Turbo – LED (7) flashes continuously
• Press and hold the TURBO button (9) together with one or more action buttons (13), then release to cycle through the three turbo modes.

Nota

• The ▲/▼/◀/▶ directional buttons cannot be set to the turbo function.
• The turbo function has no memory. All turbo settings will be cleared automatically when the USB wired connection is disconnected or the device is powered off wirelessly.

Butang MF

• With the MF LED (8) off (factory default), the four directional buttons operate in center‑reset mode:
• Press ◀ and ▶ (13) at the same time to reset to the center.
• Press ▲ and ▼ (13) at the same time to reset to the center.
• Press the MF button (10) to turn on the MF LED (8). The four directional buttons will switch to last‑input priority mode:
• The later‑pressed ◀/▶ or ▲/▼ directional button (13) overrides the earlier‑held one.
• Hold ▶ then press ◀: output is ◀.
• Hold ◀ then press ▶: output is ▶.
• Hold ▼ then press ▲: output is ▲.
• Hold ▲ then press ▼: output is ▼.
  • Nota: MF settings are not saved. After disconnecting the USB cable or entering 2.4G sleep mode, the device will automatically return to the default center‑reset mode with the MF indicator off..

Operasi

• Nama Produk
  
  • QANBA RUBY Arcade Controller
• Model
  
  • R1
• Suis mikro
  
  • Pro rendahfile silent switches
• Dimensi
  
  • 330 mm x 226 mm x 23 mm / 13.0 in x 8.9 in x 0.9 in
• Berat badan
  
  • 0.81 kg / 1.79 paun
• Panjang Kabel USB
  • 2 m / 6.56 kaki

Arahan Mengecas

• Charge via the USB port on a computer, or use the wired mode to charge while playing.
• Use a standard charger with 5V, 1–2A output.

Pematuhan

This product complies with the following regulatory information and safety tests:

• Mematuhi USB 2.0
• FCC: Peranti ini mematuhi Bahagian 15 Peraturan FCC. Operasi tertakluk kepada dua syarat berikut:

1. Peranti ini mungkin tidak menyebabkan gangguan berbahaya.
2. Peranti ini mesti menerima sebarang gangguan yang diterima, termasuk gangguan yang boleh menyebabkan operasi yang tidak diingini.

Amaran, Keselamatan dan Waranti

• Baca manual arahan ini dengan teliti.
• Do not use alcohol or liquids to clean this product; use a dry cloth instead.
• Do not disassemble the interior.
• When not in use, unplug this product and store the USB cable to prevent tripping hazards.
• This product in a cool, dry place away from liquids, fumes, and chemicals.
• Do not leave this product in hot climates, such as in the trunk of a car, for a long time on a hot summer day.
• Do not stack other items on top of this product.
• Commercial use of this prcduct is prohibited.
• The design and specifications of this product are subject to change without prior notice.
• The pr«luct is not suitable for children under 12 years old.
• Sila simpan manual ini untuk rujukan mudah.
• QANBA CN TECH will repair or replace prcxluct at its discretion 12 months from purchase date.

Sokongan pelanggan

• telefon: +86 755 29171459
• e-mel: info@qanba.com

PENYATA FCC

Peranti ini mematuhi bahagian 15 Peraturan FCC. Pengendalian tertakluk kepada dua syarat berikut: (1) Peranti ini mungkin tidak menyebabkan gangguan berbahaya, dan (2) peranti ini mesti menerima sebarang gangguan yang diterima, termasuk gangguan yang boleh menyebabkan operasi yang tidak diingini. Sebarang perubahan atau pengubahsuaian yang tidak diluluskan secara nyata oleh pihak yang bertanggungjawab untuk pematuhan boleh membatalkan kuasa pengguna untuk mengendalikan peralatan.

NOTA: Peralatan ini telah diuji dan didapati mematuhi had untuk peranti digital Kelas B, menurut Bahagian 15 Peraturan FCC. Had ini direka bentuk untuk memberikan perlindungan yang munasabah terhadap gangguan berbahaya dalam pemasangan kediaman. Peralatan ini menjana, menggunakan, dan boleh memancarkan tenaga frekuensi radio dan, jika tidak dipasang dan digunakan mengikut arahan, boleh menyebabkan gangguan berbahaya kepada komunikasi radio. Walau bagaimanapun, tiada jaminan bahawa gangguan tidak akan berlaku dalam pemasangan tertentu. Jika peralatan ini menyebabkan gangguan berbahaya kepada penerimaan radio atau televisyen, yang boleh ditentukan dengan mematikan dan menghidupkan peralatan, pengguna digalakkan untuk cuba membetulkan gangguan dengan satu atau lebih daripada langkah berikut:

• Arahkan semula atau letakkan semula antena penerima.
• Tingkatkan pemisahan antara peralatan dan penerima.
• Sambungkan peralatan ke dalam alur keluar pada litar yang berbeza daripada yang disambungkan kepada penerima.
• Rujuk pengedar atau juruteknik radio/TV yang berpengalaman untuk mendapatkan bantuan.

Peranti telah dinilai untuk memenuhi keperluan pendedahan RF am. Peranti boleh digunakan dalam keadaan pendedahan mudah alih tanpa sekatan.

Menyelesaikan masalah

• Controller not connecting wirelessly: Ensure the USB Dongle (14) is properly plugged into the host device. If the controller was previously paired, try re-pairing it by pressing the USB Dongle button (B) on the dongle.
• Pengawal tidak bertindak balas: Check if the controller is powered on (press the RESET button 15). If using wirelessly, ensure the battery is charged. If using a USB cable, ensure it’s securely connected.
• Joystick not working in an emulator: Try switching the joystick direction mode between D-Pad (DP) and Left Stick (LS) using the MODE switch. Some emulators only support one mode.
• Turbo function not working: Ensure you are not trying to set turbo on directional buttons. Remember that turbo settings are cleared upon disconnection or power off.
• Controller powers off automatically: The device will automatically power off if no connection is made within 2 minutes of turning on, or if there is no operation within 10 minutes after a successful connection. Reconnect or press a button to wake it up.