Oxbot R1 High Performance Controller User Guide

Oxbot R1 High Performance Controller

Ketahui Peranti Anda

Buttons & Controls Overview

• Butang Kuasa: Tekan dan tahan selama 3 saat untuk menghidupkan/mematikan kuasa.
• Skrin Sentuh: Swipe up, down, left, or right on the home screen to quickly switch between function panels.
• Butang Belakang: Short press: Go back to the previous menu. Long press (about 1 second): Quickly return to the home screen.

Antara Muka Utama Overview

1. Nama Peranti
2. Remote Controller Bluetooth Indicator
3. Kuasa Keluaran RF
4. Kekuatan Isyarat RF
5. Tahap Bateri Pengawal Jauh
6. Find Drone Button
7. Masa Operasi
8. Butang Ikatan
9. Trim Status Bar
10. Widget

Basic Functions & App Operation

Fungsi Asas
Model Switching: The remote controller can store multiple model profiles (including channel mapping, switch settings, etc.), allowing you to quickly switch between devices.

Langkah-langkah:

• On the home screen, swipe left to enter the “Model Selection” menu
• Browse and select the desired model Tap “Switch”.

Binding Function: Binding is required when using the receiver for the first time or after replacing it. This device only supports the ELRS 2.4GHz (ExpressLRS) protocol.

Langkah-langkah:

1. Power cycle the device receiver twice (power on then off counts as one cycle). Keep it powered on during the third power-up.
2. Observe the receiver LED. A rapid double flash indicates Bind mode.
3. On the remote controller home screen, tap “Bind” to complete the binding process.

Smart Locate (Find Drone): Smart Locate (Find Drone): Locate your device quickly if it crashes or lands unexpectedly.
(Note: The device must be equipped with a GPS module, and at least 6 satellites must be locked. Accuracy depends on the number of satellites. The displayed location is the coordinate information last returned by the device’s positioning module and is for reference only.)

Langkah:

• On the remote controller, tap “Find Drone
• A location QR code will appear on the screen
• Scan it with your phone to see the device’s last known location  Use map navigation to reach the drop location.

App Connectivity & Control System Tuning
Oxbot App Operation (Remote Controller Configuration) Used for remote controller settings, Bluetooth firmware updates, and viewing the digital user manual.

Langkah:

1. Swipe down on the home screen to open the menu and turn on Bluetooth.
2. Open the Oxbot App on your phone, tap “Add New Device”, then search for and connect to this remote controller.
3. Once connected, you can configure settings and perform firmware updates on your phone.

SpeedyBee App Operation (Wireless Parameter Configuration)
Support wireless connection for adjusting and maintaining device control system parameters.

Langkah-langkah:

1. Swipe down on the home screen to open the menu and turn on Bluetooth.
2. Use the included USB-C cable to connect the remote controller to the device control module.
3. Open the SpeedyBee App and tap “+” to search for the remote controller.
4. Ketik "Sambung".
5. Once connected, you can adjust device control parameters or update firmware directly from your phone.

Mod USB
When connected to a computer via USB-C cable, two modes are supported:

• Gamepad Mode: Functions as a professional simulator controller for mainstream simulators.
• Mod Pengecasan: Charges the remote controller.

Customization & Safety Information

1. Penyesuaian
   • Custom Control Panel: Swipe left on the home screen to enter “Model Selection”, then tap “Layout” to enter edit mode.
   • You can freely add or replace widgets (such as attitude indicator, channel output monitor, etc.) to create your personalized control interface.(Note: Additional OTA upgrade features, such as theme colors and background customization, are currently under development. Stay tuned.)
2. Arahan Keselamatan
   • Keselamatan Diutamakan: Always remove all external rotating parts before indoor binding, tuning, or power testing.
   • Semakan Pra-Penerbangan: Before powering on, ensure all switches are in their default (safe) positions and the throttle stick is at its lowest position.
   • Amaran Antena: Do not power on or transmit high-power signals without an antenna installed, as this may damage the internal RF module.
   • Pematuhan Peraturan: Before use, ensure you understand and strictly comply with local radio and electronic device regulations.

Penyata FCC

Peranti ini mematuhi bahagian 15 peraturan FCC. Operasi tertakluk kepada dua syarat berikut:

1. Peranti ini mungkin tidak menyebabkan gangguan berbahaya, dan
2. Peranti ini mesti menerima sebarang gangguan yang diterima, termasuk gangguan yang boleh menyebabkan operasi yang tidak diingini.

Perubahan atau pengubahsuaian yang tidak diluluskan secara nyata oleh pihak yang bertanggungjawab untuk pematuhan boleh membatalkan kuasa pengguna untuk mengendalikan peralatan.

NOTA: Peralatan ini telah diuji dan didapati mematuhi had untuk peranti digital Kelas B, menurut bahagian 15 Peraturan FCC.

Had ini direka bentuk untuk memberikan perlindungan yang munasabah terhadap gangguan berbahaya dalam pemasangan kediaman. Peralatan ini menjana kegunaan dan boleh memancarkan tenaga frekuensi radio dan, jika tidak dipasang dan digunakan mengikut arahan, boleh menyebabkan gangguan berbahaya kepada komunikasi radio. Walau bagaimanapun, tiada jaminan bahawa gangguan tidak akan berlaku dalam pemasangan tertentu. Jika peralatan ini menyebabkan gangguan berbahaya kepada penerimaan radio atau televisyen, yang boleh ditentukan dengan mematikan dan menghidupkan peralatan, pengguna digalakkan untuk cuba membetulkan gangguan dengan satu atau lebih daripada langkah berikut:

• Arahkan semula atau letakkan semula antena penerima.
• Tingkatkan pemisahan antara peralatan dan penerima.
• Sambungkan peralatan ke dalam alur keluar pada litar yang berbeza daripada yang disambungkan kepada penerima.
• Rujuk pengedar atau juruteknik radio/TV yang berpengalaman untuk mendapatkan bantuan.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The device has been evaluated to meet general RF exposure requirement. The device can be used in an uncontrolled environment without restriction.