NYXI HYPERION3 Magnetic Split Controller Instruction Manual

NYXI HYPERION3 Magnetic Split Controller

Dear Gamer,  Thank you for purchasing our product. Before you use the product, please read the product manual carefully.

Keserasian
Supports Switch2 host system 20.0 and above

Kandungan pakej

Left controller xl, right controller xl, rechargeable center bridge xl, replaceable D-pad xl, USB-C charging cable xl, product user manual (warranty card) xl

Parameter Teknikal

Pengawal Permainan

• Model Produk: NS-202
• Kod Produk: NJ22
• Bahan: ABS
• Berat: 215g (for left and right controllers together)
• Input: 5V=500mA
• Vol Operasitage: 3.7V
• Mengecas Arus: 400mA
• Kapasiti Bateri: Left Controller: 600mAh
• Pengawal Kanan: 600mAh
• Arus Operasi: Without Motor Vibration: ~60mA
• With Motor Vibration: ~lOOmA
• Dimensi: Left Controller: 61.2*116.7*52.2 mm
• Pengawal Kanan: 61.2*116.7*52.2 mm

Canter Bridge

• Bahan: ABS
• Berat: 50g
• Input: 5V==l000mA
• Vol Operasitage: 5V
• Arus Operasi: BOOmA
• Charging Current (per side): 200mA
• Dimensi: 115.6*46*16 mm

Penerangan produk

Connection Tutorials

NS2
Sistem yang diperlukan: Versi 20.0 atau lebih tinggi

Sambungan Berwayar
Align the left controller’s ‘-‘ key and the right controller’s ‘+’ key upwards, then magnetically attach them to the corresponding magnetic ports on both sides of the console. The console will indicate a successful match with a connection animation on both sides.

Sambungan Bluetooth
Power on the Switch 2 console. On the main interface, tap the controller icon with your finger, then select the “Change Grip/Order” screen. Press and hold the SYNC button on the left (or right) controller for 3 seconds until the RGB indicator flashes rapidly, entering Bluetooth pairing mode. The console will automatically search for and pair with the controller. After successful connection, the controllers’ RGB indicators will display solid lights in the following channel colors:

Channel 1: Jingga Pepejal
Channel 2: Hijau Pejal
Channel 3: Biru Pepejal
Channel 4: Ungu Pepejal

Penyambungan Semula Bluetooth
After initial pairing, if the controller is in sleep mode and the console is on, press any button (except L3, R3, TURBO) to reconnect via Bluetooth. (Note: Avoid touching the joysticks during reconnection.)

Bluetooth Wake-up
After initial pairing, if both the console and controller are in sleep mode, press the Home button on the right controller to wake up the console and reconnect.

Keylinker App Sambungan APP Kod QR:

1. Use a mobile browser to scan the QR code or search for “Keylinker” in your app store to download and install.
2. After installation, upon first launch, the app may request relevant permissions; grant them as prompted.
3. Connect your phone’s Bluetooth in Android/iOS mode, find the device named “NYXI NJ22”, and tap to pair.
4. After a successful connection, tap the settings button next to the device name to enter the controller customization interface.
5. Buttons can be remapped to any other key. Joystick and trigger curves can be adjusted. Motor vibration intensity can be modified. Turbo function speed can be set. Macro programming allows adjusting interval times. Power-off timing and other settings can also be configured.
6. After modifying functions, click “Apply” to save the changes.

Panduan Fungsi

Fungsi Turbo
Assign Turbo: On the left controller, hold the Turbo button+ UP, DOWN, LEFT, RIGHT, ZL, or L. On the right controller, hold Turbo+ A, B, X, Y, ZR, or R to assign turbo to that button. Then hold that assigned button to enable rapid-fire. The RGB indicator flash frequency matches the turbo speed.

• Pengawal kiri:
• Pengawal kanan:
  

Auto Turbo: Press and hold the left Turbo button+ UP, DOWN, LEFT, RIGHT, ZL, L (for left controller) or the right Turbo button + A, B, X, Y, ZR, R {for right controller) again to set the corresponding buttons to auto turbo mode.

• Pengawal kiri:
• Pengawal kanan:

Batalkan Turbo: Press and hold the left Turbo button+ UP, DOWN, LEFT, RIGHT, ZL, L (for left controller) or the right Turbo button+ A, B, X, Y, ZR, R (for right controller) again to cancel the turbo function for the corresponding buttons.

• Pengawal kiri:

Pengawal kanan:Kosongkan Semua Turbo: Press and hold the left Turbo button (for left controller) or the right Turbo button (for right controller) for 5 seconds. The controller will vibrate for l second, indicating that all turbo assignments for that controller have been cleared.Pelarasan Kelajuan Turbo: There are three adjustable speeds: Fast/ Medium/ Slow. To increase the turbo frequency, hold Turbo+ push the joystick up. To decrease, hold Turbo+ push the joystick down. The default speed is Medium. The controller will vibrate briefly each time the turbo speed is adjusted.

Back Button Mapping & Macro Programming
The two customizable buttons GUGR on the back of the controller can be mapped to specific function keys (GL can be mapped to: UP, DOWN, LEFT, RIGHT, L, ZL, L3, -; GR can be mapped to: A. B, X, Y, R, ZR, R3, +). Operation Steps:
1-While connected to the host, hold the TURBO button and press the GL/GR button once, then release to enter the GL/GR button customization mode. The RGB indicator will flash white rapidly, and the controller will vibrate for l second as a reminder.

• After entering GL (or GR) button customization mode, press a desired function key (e.g., L button for GL or A button for GR). The lit indicator will flash once, confirming that the key has been mapped to the corresponding GL/GR button. Press the GL (or GR) button again to exit customization mode for that controller. The controller will vibrate for l second, and the RGB indicator will return to its original channel indication. Follow the above steps to set the GL/GR buttons.
• During customization, multiple function keys can be input in sequence for a single GL/GR button, then press the GL/GR button again to exit and save as a macro key. In-game, pressing this key will execute the sequence according to the interval times set during programming. When GL/GR is used as a macro key, a single custom button can store up to 21 key inputs. Once 21 keys are entered, the macro will be saved automatically, and the programming mode will exit, restoring the current channel indicator.
• Clearing GL/GR Custom Button Functions: While connected to the host, hold the TURBO button and press the GL/GR button once, then release to enter GL/GR customization mode. The RGB indicator will flash white rapidly, and the controller will vibrate for l second. Briefly press the GL/GR button to clear the custom functions assigned to it. A successful clear is indicated by l second of vibration. After clearing, the button will return to a no-function state.

Pelarasan Intensiti Getaran

1. The vibration intensity of the grip motors can be adjusted to 3 levels (Off/Low/High). The factory default is Low, and the Off level disables vibration.
2. For the left or right controller, hold the TURBO button and push the joystick left (decrease) or right (increase) to adjust the grip vibration intensity. The levels cycle through Off? Low? High. After each adjustment using the combo, the controller will vibrate at the corresponding intensity for l second. When set to Off, there will be no vibration. The current vibration intensity will be remembered even after the controller is powered off.

Pencahayaan RGB

1. Hold the TURBO button and single-press the left controller’s – button or the right controller’s + button to cycle through one mode per press. There are multiple lighting effect modes, including eight solid color modes (Red, Orange, Yellow, Green, Blue, Indigo, Purple, Pink) and one mixed-color mode (the four LEDs are: top-left Yellow, bottom-left Blue, top-right Red, bottom-right Green).
2. Hold the TURBO button and double-press the left controller’s L3 or the right controller’s R3 button to turn off all RGB lighting (including the RGB joystick ring and RGB channel indicator).
   • Press the same combination again to activate mixed-color breathing mode (LEDs: top-left Yellow, bottom-left Blue, top-right Red, bottom-right Green).
   • Press the combination a third time to activate mixed-color flowing light mode (Yellow, Blue, Red, Green) – the left joystick ring flows clockwise, and the right joystick ring flows counter-clockwise.
3. Hold the TURBO button and press and hold the left controller’s L3 or the right controller’s R3 button. The brightness will cycle from dim to bright. Release the button to set the brightness to the current level. Each operation is confirmed by a vibration prompt. The controller will remember the last lighting effect state (except in lock mode, where it will revert to mixed-color flowing light mode upon the next power-on).

Hidupkan/Mati Kuasa

• Power On (Reconnect): In off state, press any button to power on and enter reconnect mode.
• Power On (Pairing): In off state, hold SYNC for 3 seconds to power on and enter pairing mode.
• Power Off: In on stats, hold the left controller’s Capture button / right controller’s Homs button for 3 seconds.
• Immediate Power Off: In on state, short-press the SYNC button. Auto Power Off: The controller will power off if the connected host enters sleep mode or turns off Bluetooth

Amaran Bateri Rendah
Amaran Bateri Rendah: Apabila voltan bateri pengawaltage drops below 3.5V during connected use, the RGB indicator flashes red rapidly to warn that the controller needs charging. If the voltage falls below 3.4V, the controller automatically shuts down.

Tidur Auto
When connected to a host, the controller enters sleep mode after 10 minutes of inactivity. (Sleep timer can be adjusted in the App.)

Mengecas

• Via Console Charging: Magnetically attach controllers to the sides of the Switch2 console. While the console is charging via its adapter, the controllers also charge. The RGB indicator breathes in its current color and stays solid when fully charged.
• Via Controller’s USB Port Charging: Connect USB cable directly to the controller. The RGB indicator breathes red while charging and turns off when fully charged. (Note: Cannot charge via controller’s USB port while connected to a host.)
• Via Center Bridge Charging: Connect a charger to the center bridge’s charging port. Both left and right charging indicators on the bridge will flash red for 0.5s, then green for 0.5s, then turn off, indicating successful self-test and standby mode. Place a controller into a charging slot; its corresponding indicator lights solid red. It turns solid green when fully charged. Removing the controller turns off its indicator.

Tetapkan semula
If the controller malfunctions (e.g., button confusion, freeze, or connection failure), try resetting it.
Kaedah: Press and hold the HOME or Capture button for 10 seconds, or short-press the SYNC button to reset the controller state.

Mod Kunci
Aktifkan: With the controller off, press and hold the SL+ SYNC (MODE) buttons for 5 seconds. After the RGB indicator flashes red slowly 3 times, the controller enters lock mode. Pressing any button will not wake it.
Nyahaktifkan: Connect the controller to a host magnetically or plug in a USB cable for charging. This exits lock mode, allowing wake-up via any button.

Penentukuran Giroskop
Pengawal Kiri: In sleep mode, press the combo [L+ UP+ CAP (Capture button)) simultaneously. Enter calibration mode (RGB indicator flashes cyan slowly). Place the controller flat on a level surface/in a jig. Press ([-] , wait a moment to exit calibration mode. Calibration complete.
Pengawal Kanan: In sleep mode, press the combo [R + X + HOME] simultaneously. Enter calibration mode (RGB indicator flashes cyan slowly). Place the controller flat on a level surface/in a jig. Press [+, wait a moment to exit calibration mode. Calibration complete. Alternative Method via Host: On the console, go to Settings > Controllers & Sensors> Calibrate Motion Controls, then press and hold “+” or -.

Penentukuran Joystick
After connecting to the host, go to Settings > Controllers & Sensors > Calibrate Control Sticks to calibrate the joysticks.

Peningkatan Perisian Tegar

1. 0TA via Phone: Connect to the Ksylinksr App and use the OTA upgrade option in the menu.
2. Via PC Software: Start the latest firmware upgrade software on a PC. With the controller off, hold the L3 (left joystick) or R3 (right joystick) button, then connect via USB cable. Once the “Upgrade” button becomes clickable, click it to start the upgrade.
3. Firmwars upgrades do not override the controller’s saved settings

LANGKAH BERJAGA-BERJAGA

Simbol itu bermaksud produk tidak boleh dibuang bersama sisa isi rumah tetapi dibawa ke tempat pengumpulan yang sesuai untuk membolehkan kitar semula. Mengikut peraturan tempatan, jangan buang produk atau bateri boleh dicas semula dengan sisa isi rumah biasa. Pelupusan produk terpakai dan bateri boleh dicas semula yang sesuai membantu mengelakkan kesan negatif terhadap alam sekitar dan kesihatan manusia.

• Jangan dedahkan kepada cecair
• Jangan buka ia
• Elakkan daripada menjatuhkannya
• Elakkan suhu yang sangat tinggi atau rendah