Sensor Pengesanan Objek MC25
1. Abstrak
The Montage Object Detection Sensor is a stand-alone Time of Flight Volumetric Sensor with
advanced hardware and firmware features. It is designed around an advanced Time of Flight
imager chip. The system detects the presence or absence of cargo inside a container or a trailer
and communicates data collected to a gateway over Bluetooth. It is mounted on the inside
ceiling of a trailer and powered from an external 12VDC power source. By looking down from
the ceiling, it senses the presence of cargo on the floor of the trailer.
Spesifikasi
1. Mekanikal | ||
1.1 | Dimensions Sensor Sekat | Rectangular 107 x 52 x 25.4 mm |
1.2 | Dimensi Kuasa Sumber | Cable with 12VDC on a customized 4 pin connector Connector. Power can be from a battery and joined with other units within the trailer |
1.3 | Lokasi Pemasangan | Sensor (shown by red arrow) will be attached to the EB and look down unobstructed to the floor.
The sensor will be mounted to the ceiling, centered between the walls. The mount will be no more than 4” below the ceiling, connected by cables down the center of the ceiling to the Energous Bridge (EB, shown by yellow oval). |
1.4 | Perumahan bahan | Product: Molded Valox FR Resin V3900WX Polycarbonate + PBT |
1.5 | Perumahan warna | putih |
1.6 | Melekap | x4 Internal Rivets or sheet metal screws. Installation from inside.
Needs to be with 2” of roof center and have < 2-degree tilt relative to the floor. Tilt and compensation for being off center can be adjusted with angle Alignment Plates underneath the housing semasa pemasangan. |
1.7 | Penarafan IP | IP67 rated water resistant housing to ensure device can withstand fine dust and protection from condensing humidity within the reefer. |
1.8 | Suhu Operasi | -20˚C to +60˚C (-4˚F to 140˚F) |
1.9 | Penilaian Kemudahbakaran | UL 94 V-0 |
2. Reka bentuk | ||
2.1 | Bluetooth ® Antenna | Internal antenna positioned inside the Sensor enclosure for good reception. |
2.2 | Trailer Ambient
Suhu |
Temperature sensor to measure the trailer internal ambient conditions is placed near the connector for thermal conduction. |
2.3 | Shock & Vibration Rating | U.S. Military Standards 202G and 810F, SAE
J1455 |
2.4 | EMC/EMI | SAE J1113; Industri FCC-Bahagian 15B
Kanada |
3. Laser dan Optik | ||
3.1 | Imager | FPA = 8×8 piksel (pelepasan VCSEL)
Resolution of up to 64 points |
3.2 | Julat Operasi | 9' |
3.3 | Keadaan Operasi | Untuk kegunaan dalaman sahaja |
4. Bekalan Kuasa | ||
4.1 | Source-1 | 12VDC power source power range (up to 24Vnom, 32V limit), resettable fuses, watchdog timer. |
4.2 | Kapasiti Bateri | Bateri onboard 800mAh |
5. Elektronik | ||
5.1 | CPU utama | NORDIC nRF52840 dengan Keupayaan OTA DFU |
5.2 | Bluetooth ® SoC | NORDIC nRF52840 dengan Keupayaan OTA DFU |
5.3 | Bluetooth ® Radio Front End Amplebih hidup | +18 dBm |
6. Ketersambungan | ||
Bluetooth ® | ||
6.1 | Kesambungan Wayarles | Pairs nearby Bluetooth Gateway through a defined
communication structure in both data through BLE advertisement and connection profiles |
6.2 | Versi | Bluetooth Tenaga Rendah BLE 5.0 |
6.3 | Kuasa Penghantaran | -20dBm hingga +8dBm
Selectable through Firmware |
7. Pensijilan | ||
7.1 | FCC | Product shall comply with all applicable wireless standards/rules |
7.2 | UL / CE | ya |
7.3 | RoHS | Product shall be RoHS compliant and not have any known-harmful materials or substances on any external surface |
7.4 | Keselamatan Mata | Kelas-1 |
3 Imej Produk
4 Pemasangan Cthample
Peraturan FCC
Peranti ini mematuhi bahagian 15 Peraturan FCC. Operasi tertakluk kepada dua syarat berikut:
(1) Peranti ini mungkin tidak menyebabkan gangguan berbahaya, dan
(2) peranti ini mesti menerima sebarang gangguan yang diterima, termasuk gangguan yang boleh menyebabkan operasi yang tidak diingini.
Peralatan ini telah diuji dan didapati mematuhi had untuk peranti digital Kelas B, menurut bahagian 15 Peraturan FCC. Had ini direka bentuk untuk memberikan perlindungan yang munasabah terhadap gangguan berbahaya dalam pemasangan kediaman. Peralatan ini menjana, menggunakan dan boleh memancarkan tenaga frekuensi radio dan, jika tidak dipasang dan digunakan mengikut arahan, boleh menyebabkan gangguan berbahaya kepada komunikasi radio. Walau bagaimanapun, tiada jaminan bahawa gangguan tidak akan berlaku dalam pemasangan tertentu. Jika peralatan ini menyebabkan gangguan berbahaya kepada penerimaan radio atau televisyen, yang boleh ditentukan dengan mematikan dan menghidupkan peralatan, pengguna digalakkan untuk cuba membetulkan gangguan dengan satu atau lebih daripada langkah berikut:
—Arahkan semula atau letakkan semula antena penerima.
—Tingkatkan pemisahan antara peralatan dan penerima.
—Sambungkan peralatan ke dalam alur keluar pada litar yang berbeza daripada yang disambungkan kepada penerima.
—Rujuk pengedar atau juruteknik radio/TV yang berpengalaman untuk mendapatkan bantuan.
Perubahan atau pengubahsuaian yang tidak diluluskan secara nyata oleh pengilang boleh membatalkan kuasa pengguna untuk mengendalikan peralatan.
V 1.4 [3-14-2025]
Penyata Pendedahan Sinaran RF FCC
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
5 daripada 5
Dokumen / Sumber
![]() |
isntage Sensor Pengesanan Objek MC25 [pdf] Manual Pemilik 2BLQ4-MC25, 2BLQ4MC25, mc25, Penderia Pengesanan Objek MC25, MC25, Penderia Pengesanan Objek, Penderia Pengesanan, Penderia |