M5STACK Stamp-S3Bat Embedded Core Module
Penerangan
Stamp-S3Bat is an embedded core module integrated with power management. It utilizes the ESP32-S3-PICO-1-N8R8 as the main control core, supports 2.4GHz Wi-Fi, and comes with built-in 8MB Flash and 8MB PSRAM.
It provides 11 GPIO pins, an onboard battery power interface, and can be directly connected to an external 3.7V lithium battery for power supply.
With an efficient built-in PMIC and multi-level power control design, it supports power input and output control, as well as status monitoring for input voltage dan bateri voltage. It supports external low-power wake-up. After the main controller shuts down and enters low-power sleep mode, it can be triggered to wake up via an external PMIC wake-up IO. The module features an onboard user button and a programmable RGB LED. With 2.54mm standard-pitch half-hole solder pads, it can be integrated into your applications through SMT, DIP, or other methods, helping developers quickly build IoT applications.
Spesifikasi
Mula Pantas
Persediaan
- Lawati Arduino rasmi webtapak dan pasang IDE Arduino
https://www.arduino.cc/en/Main/Software - Tambah Pengurus Lembaga berikut URL kepada File → Keutamaan → Pengurus Papan Tambahan URLs:
https://espressif.github.io/arduino-esp32/package_esp32_dev_index.json
- Buka Pengurus Papan, cari "ESP32", dan klik pasang.
- After installation, select the board “ESP32S3 Dev Module”.
- Configure the following options. USB CDC On Boot: “Enabled”, PSRAM： “OPI PSRAM”, USB Mode: “Hardware CDC and JTAG”
Imbasan Wi-Fi
- Pilih bekasampprogram “Cthamples” → “WiFi” → “WiFiScan”, pilih port yang sepadan dengan peranti anda dan klik butang kompil dan muat naik di penjuru kiri sebelah atas.
- Selepas muat naik selesai, buka Monitor Serial untuk view Maklumat imbasan Wi-Fi.
Imbasan BLE
- Pilih bekasampprogram “Cthamples” → “BLE” → ”Imbas”, pilih port yang sepadan dengan peranti anda dan klik butang kompil dan muat naik di penjuru kiri sebelah atas.
- Selepas muat naik selesai, buka Monitor Serial untuk view Maklumat imbasan BLE.
Amaran FCC
Awas FCC:
Sebarang Perubahan atau pengubahsuaian yang tidak diluluskan secara nyata oleh pihak yang bertanggungjawab untuk pematuhan boleh membatalkan kuasa pengguna untuk mengendalikan peralatan.
Peranti ini mematuhi bahagian 15 Peraturan FCC. Operasi tertakluk kepada dua syarat berikut:
- This device may not cause harmful interference, andThiss device must accept any interference received, including interference that may cause undesired operation.
NOTA PENTING:
Nota: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use,s and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Arahkan semula atau letakkan semula antena penerima.
- Tingkatkan pemisahan antara peralatan dan penerima.
- Sambungkan peralatan ke dalam alur keluar pada litar yang berbeza daripada yang disambungkan kepada penerima.
- Rujuk pengedar atau juruteknik radio/TV yang berpengalaman untuk mendapatkan bantuan.
Kenyataan Pendedahan Sinaran FCC:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated wita h minimum distance of 20cm between the radiator & your body.
Soalan Lazim
Q: Can I power the Stamp-S3Bat using a different voltagdan bateri?
A: It is recommended to use a 3.7V lithium battery as the input power source for the Stamp-S3Bat to ensure optimal performance and compatibility.
Q: How many GPIO pins does Stamp-S3Bat provide?
A: Stamp-S3Bat provides a total of 11 GPIO pins for connecting external devices and sensors.
Q: What is the operating temperature range of Stamp-S3Bat?
A: The operating temperature range of Stamp-S3Bat is not specified in the user manual. It is advisable to operate within normal room temperature conditions for best results.
Dokumen / Sumber
 |
M5STACK Stamp-S3Bat Embedded Core Module [pdf] Panduan Pengguna Stamp-S3Bat, Stamp-S3Bat Embedded Core Module, Embedded Core Module, Core Module |