IKEA HEMNES Solid Pine Desk Installation Guide

IKEA HEMNES Solid Pine Desk Installation Guide

HEMNES Solid Pine Desk

Arahan Perhimpunan

This document provides assembly instructions for a furniture item, including safety guidelines, parts lists, hardware lists, and step-by-step assembly procedures.

Spesifikasi

Komponen Kapasiti Berat Maks
Main Item 150 LBS (68 KG)
Shelf/Drawer 11 LBS (5 KG)
Lain-lain 22 LBS (10 KG)

Panduan Cepat

Read all instructions before beginning. Ensure all parcels are received. Assembly by two people is recommended. Use the parts and hardware lists to identify and separate components. Save all packing materials until assembly is completed.

ARAHAN PERHIMPUNAN

Arahan Keselamatan Penting:
  • ● Please read all instructions before beginning assembly
  • ● Please make sure receive all the parcels to start the assembly
  • ● For your safety and convenience, assembly by two people is recommended
  • ● Use the parts and hardware lists to identify and separate each of the components included
  • ● Save all packing materials until assembly is completed to avoid the accidental discarding of smaller parts or hardware

Line drawing of a desk with a drawer and two open shelves on the left side.

TERIMA KASIH KERANA MEMBELIASING

PARTS LIST

1 X1 2 X1 3 X1 4 X1 5 X1
6 X1 7 X1 8 X1 9 X1 10 X1
11 X1 12 X1 14 X1 15 X1 16 X1
17 X1 18 X1

Meletup view diagram of a desk with numbered callouts 1 through 18 (excluding 13) pointing to various components.

Kapasiti berat maksimum

MAXIMUM WEIGHT: 150 LBS (68 KG)

BERAT MAKSIMUM:

11 LBS (5 KG)

BERAT MAKSIMUM:

22 LBS (10 KG)

Diagram of the assembled desk with callouts indicating weight capacity limits for the top, drawer, and shelves.

SENARAI PERKAKASAN

Nama Bahagian Kuantiti ganti
A A long, thin metal bolt with a hexagonal head and a threaded shaft. 11 1
B A metal nut with a hexagonal shape and a central hole. 11 1
C A metal rod or pin with a hexagonal head and a threaded shaft. 18 1
D A metal pin or bolt with a hexagonal head and a threaded shaft. 4
F A metal hook or bracket with a circular end and a threaded shaft. 1
G A metal bolt with a hexagonal head and a threaded shaft.

7/8″ Bolt 		1 1
H A metal bracket or support with a curved top and a threaded shaft. 2
Nama Bahagian Kuantiti ganti
I A metal screw with a hexagonal head and a threaded shaft.

2-3 / 8 ″ Skru 		18 1
J A metal screw with a hexagonal head and a threaded shaft.

1/2 ″ Skru 		4
K A metal screw with a hexagonal head and a threaded shaft.

2″ Skru 		5 1
L A metal screw with a hexagonal head and a threaded shaft.

1-1 / 2 ″ Skru 		4
M A metal screw with a hexagonal head and a threaded shaft.

9/16 ″ Skru 		2
O A metal screw with a hexagonal head and a threaded shaft.

2″ Skru 		2

LANGKAH 1

Bahagian Kuantiti Penerangan
C 9pcs dowel kayu
A 2pcs Selak cam

Prepare the wooden components by inserting hardware as follows:

  • Bahagian 5: Insert 2 wooden dowels (C) into each end (4 total).
  • Bahagian 4: Insert 2 wooden dowels (C) into the top edge.
  • Bahagian 3: Insert 2 wooden dowels (C) into the top edge and 1 cam bolt (A) into the side. Tighten cam bolt (A) with a screwdriver.
  • Bahagian 11: Insert 1 wooden dowel (C) into one end.

LANGKAH 2


Seorang pembantu diperlukan.

Bahagian Kuantiti Penerangan
K 4pcs Skru kayu panjang
I 4pcs Bolt panjang

Assemble the main frame by connecting the side panels to the horizontal rails:

  • Sambung Bahagian 3 kepada Bahagian 5 dan Bahagian 6 using 4 screws (K).
  • Sambung Bahagian 4 kepada Bahagian 5 dan Bahagian 6 using 4 bolts (I).

LANGKAH 3

Seorang pembantu diperlukan.


K

x 1pc

Screw K


I

x 1pc

Screw I
Assembly diagram for Step 3

LANGKAH 4


C

x 9 pcs

Wooden dowel C
Close-up of wooden dowel C
Assembly diagram for Step 4

LANGKAH 5

item Kuantiti Imej
I 1pc

Image: A long screw with a flat head and a threaded shaft.

  1. Attach board (10) to the raw edge of panel (7) using screw (I).

Bahagian Selesai

7

Tepi mentah

10

Image: Diagram for Step 5 showing board (10) being attached to the raw edge of panel (7) with screw (I). The finished side of panel (7) is also labeled.

LANGKAH 6

item Kuantiti Imej
B 2pcs

Image: A cam lock hardware component.

  1. Attach board (8) to frame component (3) using cam locks (B).

3

8

Image: Diagram for Step 6 showing board (8) being attached to frame component (3).

  1. 1 Image: Diagram 1: Insert bolt into the hole.
  2. 2 B Image: Diagram 2: Insert cam lock (B) into the hole.
  3. 3 Tighten Image: Diagram 3: Tighten the cam lock using a screwdriver.

LANGKAH 7

Bahagian Kuantiti
Ⓘ x 4 pcs

Diagram for Step 7 showing the assembly of a wooden frame. A screw (I) is used to secure a side panel (7) to the frame. The 'Raw Side' is indicated for parts 7 and 12. Other components labeled are 3 and 12.

LANGKAH 8

Bahagian Kuantiti
Ⓘ x 8 pcs

Diagram for Step 8 showing the assembly of a wooden frame. Screws (I) are used to secure side panels and rails. Components labeled are 2, 7, 8, 10, and 12.

LANGKAH 9


A
 		x 9 pcs

Cam bolt A: A metal bolt used in conjunction with a cam lock for furniture assembly.
Close-up diagram showing a screwdriver tightening cam bolt A into a pre-drilled hole in the table top (1).
Main diagram for Step 9 showing the top panel (1) with 9 cam bolts (A) being installed around its perimeter.

LANGKAH 10


B
 		x 9 pcs

Cam lock B: A circular metal fastener that locks onto a cam bolt to secure panels together.


O
 		x 2 pcs

Long screw O: A long screw with a Phillips head, used for structural fastening.

With assistant carefully stand unit up.

Diagram 1: A circular inset showing the corner of the table frame being aligned with the top panel.
Diagram 2: A circular inset showing a cam lock (B) being inserted into the corner joint of the table frame.

3 Ketatkan

Diagram 3: A circular inset showing a screwdriver being used to tighten the cam lock (B) in the corner joint.
Main diagram for Step 10 showing the table frame (labeled with parts 2, 3, 4, 5, 11) being attached to the top panel (1). Dashed lines indicate the placement of cam locks (B) and long screws (O).

LANGKAH 11

Perkakasan Penerangan Kuantiti
D Dowel Kayu 4 pcs


Arahan perhimpunan:

LANGKAH 12

Arahan perhimpunan:

LANGKAH 13


H

x 2 pcs

Bracket H


M

x 2 pcs

Screw M

Do not use power screw driver,

use manual screw driver.

Step 13 assembly diagram

LANGKAH 14


J

x 4 pcs

Skru J


L

x 4 pcs

Skru L

Do not use power screw driver,

use manual screw driver.

Step 14 assembly diagram

LANGKAH 15

Label Bahagian Kuantiti Imej
F 1pc

Image: Bracket F

G 1pc

Image: Screw G

Diagram showing the installation of bracket F and screw G into the drawer front. The bracket is attached to the top edge of the drawer front, and the screw is inserted into the pre-drilled hole. The number 14 is shown in a circle next to the screw.

LANGKAH 16

  • -Move unit to final location.
  • -Adjust drawer fronts as shown below.
  • Step1–Loosen screws on back of drawer front brackets as shown.
  • Step2–Position drawer front as required.
  • Step3–Tighten screws while holding drawer front in position.

Zoomed-in diagram showing the adjustment mechanism of the drawer front bracket.

LUKISAN DEPAN VIEW

Image: Diagram showing centered drawer front alignment.

Image: Checkmark icon indicating correct alignment.

Image: Diagram showing off-center drawer front alignment.

Image: X icon indicating incorrect alignment.

Diagram showing the desk with the drawer front installed. The number 14 is shown in a circle next to the drawer front.


LANGKAH 1.

Image: Diagram showing a screwdriver loosening a screw on the bracket with a counter-clockwise arrow.


LANGKAH 2.

Image: Diagram showing the drawer front bracket with multi-directional arrows indicating the range of motion for adjustment.


LANGKAH 3.

Image: Diagram showing a screwdriver tightening a screw on the bracket with a clockwise arrow.

Menyelesaikan masalah

No troubleshooting information is available in the provided text.

Dokumen / Sumber

PDF thumbnailHEMNES Solid Pine Desk
Installation Guide · HEMNES Solid Pine Desk, HEMNES, Solid Pine Desk, Pine Desk, Desk

Rujukan

Published: July 10, 2026

Tanya Soalan

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Tanya Soalan

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.

IKEA SODERHAMN Corner Section Instruction Manual
10 Julai 2026
IKEA SODERHAMN 3-Seat Section Instruction Manual
10 Julai 2026
IKEA SODERHAMN 4-Seat Sofa Instruction Manual
10 Julai 2026
IKEA LAGAN S, LAGAN L Wall Mounted Extractor Hood User Manual
10 Julai 2026