Panduan Pengguna Pita Reflektif Kilas Balik

Cara Memakai Pita Reflektif
Panduan Langkah demi Langkah

Flashback Tape – www.flashbacktape.co.uk

Alat yang Anda Perlukan

• Mild detergent or surface cleaner
• Clean cloths or paper towels
• Pita pengukur atau pembaris
• Gunting atau pisau kraf
• Plastic squeegee or old credit card
• Optional: edge sealer (for outdoor/vehicle use)

Langkah 1: Sediakan Permukaan
Clean the surface thoroughly with mild detergent and water. Remove dust, grease, or wax, and dry completely. Ideal temperature: 10–30°C.

Langkah 2: Ukur & Potong Pita
Ukur kawasan dengan teliti. Potong pita mengikut saiz, bulatkan sudut untuk mengelakkan pengelupasan.

Langkah 3: Kupas & Kedudukan
Kupas bahagian kecil bahagian belakang. Letakkan pita dan sapukan perlahan-lahan, keluarkan lebih banyak sandaran semasa anda pergi.

Langkah 4: Gunakan Tekanan Sekata
Use a squeegee or old credit card to press the tape down firmly, working from the centre outward.

Langkah 5: Tutup Tepi (Pilihan)
Untuk kegunaan luar, sapukan lapisan nipis pengedap tepi di sepanjang sempadan pita.

Langkah 6: Pemeriksaan Akhir
Semak buih atau kedutan. Biarkan 24 jam sebelum mencuci atau pendedahan berat.

Application Tips by Surface

• Vehicles: Use ECE104-approved tape, apply along flat panels.
• Bicycles: Cut into smaller strips for frames and rims.
• Bollards: Use flexible glass bead tape on curved surfaces.
• DIY/Home: Highlight steps, doors, or bins with weather-resistant tape.

Kesilapan Biasa yang Perlu Dielakkan

• Applying to dirty or wet surfaces
• Stretching the tape during application
• Using sharp metal tools to press the tape
• Skipping measurement or rushing the process

Maintenance & Aftercare

Clean gently with mild soapy water, avoid harsh chemicals, and inspect edges regularly. Replace if the tape becomes faded or damaged.

www.flashbacktape.co.uk