GUNAKAN ARAHAN
Pengaturcara Alamat Terminal
| PRG.PAS.MCS |
| 170 x 112 x 35 mm/ 270 g |
| Plastic case + mechanical keyboard 0°C … 45°C – IP 31 |
| Bekalan kuasa: 9V (bateri/bateri boleh dicas semula) |
| Sambungan ke terminal melalui Kabel Patch UTP 0.25 cm |
| Alamat tersedia untuk pengaturcaraan: antara "000" dan "998" Menaip "999" menamatkan pengaturcaraan alamat. |
PENERANGAN
The PRG.PAS.MCS programmer allows the programming of the address (apartment number) for all types of terminals in the Garis Klasik range: PAS.17A, PAS.27X, PAS.37X, MCS.47X.
This programmer serves as the mobile alternative to the terminal address programming function, enabling the address to be programmed both on-site and in the office, by a single person.
SAMBUNGAN KE TERMINAL
- Kabel Tampalan UTP 0.25 cm
- belakang
- Depan
- Pengaturcara PRG.PAS.MCS
- Video terminal – audio (MCS.47X, PAS.27X, PAS.37X)
HIDUP/MATI
- The programmer is turned on by pressing the ON key.
- The programmer turns off:
– 3 seconds after entering the last digit of the programmed address;
– 10 seconds after being turned on, if no key is pressed.
PENGATURCARAAN
Langkah 1: Connect the programmer to the terminal.
Langkah 2: Tekan ke ON key on the programmer → The display shows [Siaran alamat].
Langkah 3: On the terminal, press and hold the 
kunci.
Langkah 4: On the programmer, enter the terminal address to be programmed (3 digits required). After entering the last digit, the terminal will issue a confirmation beep, and the key can be released.
07.2025 INS.PRG.PAS.MCS
DIBUAT di EU oleh:
ELECTRA srl
Perindustrian Parc Miroslava
Str. Principala 33, 707307, Jud. Iaşi – RO
+40 232 214.370
sales@electra.ro
www.electra.ro
SOKONGAN
ELECTRA Building Communications GmbH
Gadnergasse 71, Stockwerk 1, Büro Top 132
1110 Wien – AT
+43 1 810 20 99
sales@electra-automation.at
www.electra-automation.at
Dokumen / Sumber
 |
Pengaturcara Alamat Terminal Electra PAS.17A [pdf] Manual Arahan PAS.17A, PAS.27X, PAS.37X, MCS.47X, PAS.17A Pengaturcara Alamat Terminal, PAS.17A, Pengaturcara Alamat Terminal, Pengaturcara Alamat, Pengaturcara |