coolo Zigbee Smart Light Sensor User Manual

Coolo Zigbee Smart Light Sensor

Konfigurasi Rangkaian

1. Hidupkan produk
   • Align the opener to the slot
   • Putar penutup bateri lawan jam untuk membuka
   • Remove the battery insulation film to power
2. Tekan butang RESET selama 3s dan lepaskan, LED merah akan berkelip untuk konfigurasi rangkaian.

Arahan Pemasangan

Kedudukan pemasangan
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.

Sila baca manual dengan teliti dan gunakan produk dengan betul
Terima kasih kerana membeliasing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

Penerangan produk

Petua:
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP

Parameter Produk

• Product Name Zigbee Ambient Light Sensor
• Protokol Wayarles Zigbee 3.0
• Detection Range 0~157K Lux
• Battery TypeCR2450
• Standby Current<10uA
• Working Temperature -10 ~ 55 C
• Working Humidity 0% ~ 95%RH
• Product Size Ф 33×16mm