Smith's Environmental Products Manuals & User Guides
British manufacturer of heating and cooling products, specializing in plinth heaters and fan convectors for residential and commercial use.
About Smith's Environmental Products manuals on Manuals.plus
Smith's Environmental Products is a leading UK-based manufacturer of heating and cooling solutions tailored for both residential and commercial applications. The company is best known for its space-saving innovation, the Penjimat Ruang plinth heater, which fits discreetly into kitchen plinths to free up wall space.
Smith's also produces the Caspian range of commercial fan convectors and the Eco-Powerad series, all designed to work efficiently with hydronic central heating systems, including those powered by renewable sources like air and ground source heat pumps.
Smith's Environmental Products manuals
Manual terkini daripada manuals+ dipilih susun untuk jenama ini.
Produk Persekitaran Smith: Aksesori Sistem Pemanasan Glosari dan Keserasian
Smith's Environmental Products manuals from online retailers
Smith's Environmental Products Quiet-One Kickspace Fan Heater (Model B628330) User Manual
Smith's Environmental Products video guides
Tonton video persediaan, pemasangan dan penyelesaian masalah untuk jenama ini.
Smith's Environmental Products support FAQ
Soalan lazim tentang manual, pendaftaran dan sokongan untuk jenama ini.
-
Why is my Smith's fan convector not running?
Check that the power supply is switched on via the fused spur and that the central heating system is active. The unit also requires the water temperature to be above 38°C to activate the fan.
-
How do I register my Smith's product warranty?
You can register your product online at the official Smith's Environmental Products website under the Product Registration section.
-
Does the fan convector work with heat pumps?
Yes, many Smith's models like the Caspian and Eco-Powerad are designed to operate effectively with lower water temperatures typical of heat pump systems (down to 40°C).
-
Where is the fuse located for my heater?
The unit is typically connected via a double-pole 3A fused spur, which should be accessible near the installation but not directly above the heater.