SawStop Manuals & User Guides

SawStop is North America's premier manufacturer of high-quality table saws, widely recognized for pioneering the world's safest table saw technology. Founded in 2000, SawStop revolutionized the woodworking industry with its proprietary electronic detection system and fast-acting brake. If the spinning blade comes into contact with skin, the system detects the change in electrical capacitance and deploys a brake block in milliseconds, stopping the blade instantly and retracting it below the table to prevent catastrophic injury.

Beyond their life-saving safety features, SawStop saws are celebrated for their exceptional build quality, precision engineering, and durability. Their product lineup includes jobsite saws, contractor saws, professional cabinet saws, and heavy-duty industrial models designed to meet the rigorous demands of both hobbyists and professional woodworkers. With rigorous self-diagnostic electronics and premium fence systems like the T-Glide Advance Fence, SawStop ensures unparalleled accuracy and peace of mind on every cut.

• How do I contact SawStop customer support?

  You can reach SawStop technical support at 503-582-9934 or by emailing service@sawstop.com.

• How often should I replace the belts on my SawStop cabinet saw?

  SawStop typically recommends replacing both the motor and arbor belts every 2 to 4 years of use, or if they make noise on startup or lack power during cutting.

• Where can I register my new SawStop table saw?

  You can quickly register your SawStop saw by visiting https://www.sawstop.com/register-your-saw/ to gain two years of warranty coverage and streamline support.

• What should I do if my SawStop brake cartridge is triggered?

  After a brake activation, both the brake cartridge and the saw blade must be replaced to ensure safety. If the activation was caused by skin contact, you can report it to SawStop and you may receive a free replacement cartridge.

• Can I bypass the SawStop safety system to cut conductive materials?

  Yes, if you need to cut electrically conductive materials like aluminum, mirrored acrylic, or wet pressure-treated wood, the safety system can be placed in Bypass Mode to temporarily disable the brake and prevent false activations.