Boardcon Embedded Design CM1126B-P Reference Module
Spesifikasi
- ciri: CM1126B-P
- CPU: Korteks-A53 empat teras
- RDD: 2GB LPDDR4 (sehingga 4GB)
- eMMC: 8GB (sehingga 256GB)
- KILAT: DC 3.3V
- Kuasa: 4-Lorong
- MIPI DSI: 3-CH
Arahan Penggunaan Produk
Panduan Reka Bentuk Perkakasan
- This section provides information on the peripheral circuit reference and PCB footprint for the board.
Ciri-ciri Elektrik Produk
- This section covers dissipation, temperature, and reliability of tests related to the product.
Rajah Blok CM1126B-P
- Refer to the block diagrams for RV1126B-P and the development board included in this manual for a visual representation of the product’s components.
Definisi Pin CM1126B-P
- Understand the pin definitions provided in the manual to correctly interface with the board. Make sure to follow the pinout for proper connections.
pengenalan
Mengenai Manual ini
- Manual ini bertujuan untuk memberikan pengguna lebihview papan dan faedahnya, spesifikasi ciri lengkap dan prosedur persediaan. Ia mengandungi maklumat keselamatan yang penting juga.
Maklum Balas dan Kemas Kini Manual ini
- Untuk membantu pelanggan kami memanfaatkan produk kami sepenuhnya, kami sentiasa menyediakan sumber tambahan dan dikemas kini di Boardcon webtapak (www.boardcon.com, www.armdesigner.com).
- Ini termasuk manual, nota aplikasi, pengaturcaraan examples, dan perisian serta perkakasan yang dikemas kini. Daftar masuk secara berkala untuk melihat perkara baharu!
- When we are prioritizing work on these updated resources, feedback from customers is the number one influence.
- If you have questions, comments, or concerns about your product or project, please do not hesitate to contact us at support@armdesigner.com.
Waranti Terhad
- Boardcon warrants this product to be free of defects in material and workmanship for a period of one year from the date of purchase.
- During this warranty period, Boardcon will repair or replace the defective unit in accordance with the following process.
- A copy of the original invoice must be included when returning the defective unit to Boardcon.
- This limited warranty does not cover damages resulting from lightning or other power surges, misuse, abuse, abnormal conditions of operation, or attempts to alter or modify the function of the product.
- Waranti ini terhad kepada pembaikan atau penggantian unit yang rosak. Dalam apa jua keadaan, Boardcon tidak akan bertanggungjawab atau bertanggungjawab ke atas sebarang kerugian atau kerosakan, termasuk tetapi tidak terhad kepada sebarang kehilangan keuntungan, kerosakan sampingan atau berbangkit, kerugian perniagaan, atau keuntungan jangkaan yang timbul daripada penggunaan atau ketidakupayaan untuk menggunakan produk ini.
- Pembaikan yang dibuat selepas tamat tempoh jaminan adalah tertakluk kepada caj pembaikan dan kos penghantaran balik. Sila hubungi Boardcon untuk mengatur sebarang perkhidmatan pembaikan dan mendapatkan maklumat caj pembaikan.
Ringkasan
- The CM1126B-P system-on-module is equipped with Rockchip’s RV1126B-P, built with a quad-core Cortex-A53, 3.0 TOPs NPU, and RISC-V MCU.
- It is designed specifically for the IPC/CVR devices, AI Camera devices, intelligent interactive devices, and mini robots.
- The high-performance and low-power solution can help customers introduce new technologies more quickly and enhance the overall solution efficiency.
- The smallest size can be put on a 38board.
- Please note CM1126B-P V1 change to V2, then CPU exchange to RV1126B-P, the Reset & OTG_VBUS signal, and the WIFI/BT module’s GPIO voltage must be changed to 3.3V.
Ciri-ciri
Mikropemproses
- Quad-core Cortex-A53 sehingga 1.6 GHz
- 32KB I-cache dan 32KB D-cache untuk setiap teras, 512KB L3 cache
- 3.0 TOPS Unit Proses Neural
- RISC-V MCU untuk menyokong but pantas 250mS
- ISP maksimum 12M
Organisasi Memori
- LPDDR4 RAM sehingga 4GB
- EMMC 4.51 up to 256GB
Penyahkod/Pengekod Video
- Menyokong penyahkod/enkod video sehingga 4K@30fps
- Menyokong penyahkodan masa nyata H.264/265
- Menyokong pengekodan video UHD H.264/265 masa nyata
- Saiz gambar sehingga 8192×8192
Subsistem Paparan
- Output Video
- Supports 4 lanes MIPI DSI up to 2560×1440@60fps. Supports 24-bit RGB parallel output
- Imej masuk
- Menyokong antara muka DVP sehingga 16-bit
- Menyokong antara muka 2ch MIPI CSI 4lanes
SAI
- Three I2S/PCM/TDM interface
- Sokong susunan mikrofon Sehingga antara muka PDM/TDM 8ch
- Menyokong output audio PWM
USB
- Dua antara muka USB 2.0
- Satu USB 2.0 OTG, dan satu hos USB 2.0
Ethernet
- RTL8211F di atas kapal
- Sokongan 10/100/1000M
I2C
- Up to six I2Cs
- Menyokong mod standard dan mod pantas (sehingga 400kbit/s)
SDIO
- Support the SDIO 3.0 protocol
- Up to 2-CH SDMMC
BOLEH
- Menyokong protokol CAN FD
- Sehingga 2-CH CAN
SPI
- Sehingga dua pengawal SPI,
- Antara muka siri segerak dupleks penuh
UART
- Menyokong sehingga 8 UART
- UART0 dengan 2 wayar untuk alat nyahpepijat
- Dua FIFO 64-bait dibenamkan
- Support RS485 for UART1~7
DSMC
- Achieve low-cost FPGA connection
- Menyokong mod pemindahan bersiri 8-16 wayar
- Support up to select 4 chips, and signals configured to be valid simultaneously in a transaction
ADC
- Sehingga empat saluran ADC
- resolusi 13-bit
- Voltage julat input antara 0V hingga 1.8V
- Menyokong sehingga 2MS/ssampkadar ling
PWM
- Jumlah 28-ch dengan antara muka 4 PWM
- Only PWM2 can generate a waveform througha lookup table
- Menyokong mod berterusan dan mod output satu pukulan
- Sokong mod kapsyen input
Unit kuasa
- Kuasa Diskret di atas kapal
- Input 3.3V tunggal
Rajah Blok CM1126B-P
Rajah Blok RV1126B-P
Rajah Blok Papan Pembangunan
Spesifikasi
CM1126B-P Specifications
| Ciri | Spesifikasi |
| CPU | Korteks-A53 empat teras |
| DDR | 2GB LPDDR4 (sehingga 4GB) |
| eMMC FLASH | 8GB (sehingga 256GB) |
| kuasa | DC 3.3V |
| MIPI DSI | 4-Lorong |
| I2S | 3-CH |
| I2C | 6-CH |
| MIPI CSI | 2-CH 4-Lorong |
| LCD RGB | 24bit |
| Kamera | 1-CH(DVP) dan 2-CH(CSI) |
| USB | 2-CH (USB HOST2.0 dan OTG 2.0) |
| Ethernet | 1000M GMAC |
| SDMMC | 2-CH |
| BOLEH | 2-CH |
| SPI | 2-CH |
| UART | 7-CH, 1-CH(DEBUG) |
| PWM | 11-CH |
| ADC DALAM | 4-CH |
| Dimensi Papan | 34 x 35mm |
Dimensi
Dimensi PCB CM1126B-P
Definisi Pin CM1126B-P
| Pin | isyarat | Penerangan atau fungsi | siri GPIO | IO Voltage |
| 1 | LCDC_D19_3V3 | VI_CIF_D15_M1/SAI1_MCLK_
M2/PWM3_CH3_M1 |
GPIO5_C3_d | 3.3V |
| 2 | LCDC_D20_3V3 | VI_CIF_VSYNC_M1/SAI1_SDO
_M2/PWM3_CH4_M1 |
GPIO5_C4_d | 3.3V |
| 3 | LCDC_D21_3V3 | VI_CIF_CLKOUT_M1/SAI1_SC
LK_M2/PWM3_CH5_M1 |
GPIO5_C5_d | 3.3V |
| 4 | LCDC_D22_3V3 | VI_CIF_CLKIN_M1/SAI1_LRCK
_M2/PWM3_CH6_M1 |
GPIO5_C6_d | 3.3V |
| 5 | LCDC_D23_3V3 | VI_CIF_HSYNC_M1/SAI1_SDI_
M2/PWM3_CH7_M1 |
GPIO5_C7_d | 3.3V |
| 6 | GND | tanah | 0V | |
|
7 |
GPIO3_B7_d_3V3 |
UART1_RX_M1/I2C5_SDA_M1/ SAI2_SDI1_M0 | GPIO3_B7_d | 3.3V(V2) |
| 8 | BT_WAKE | SPI1_CSN1_M1/SAI2_MCLK_M 0/SDMMC1_DETN/UART1_TX_
M1/I2C5_SCL_M1 |
GPIO3_B6_d | 3.3V(V2) |
| 9 | WIFI_REG_ON | SPI0_MOSI_M0 | GPIO0_B0_d | 3.3V(V2) |
| 10 | BT_RST | SPI0_MISO_M0 | GPIO0_B1_d | 3.3V(V2) |
| 11 | WIFI_WAKE_HOST | SPI0_CLK_M0 | GPIO0_B2_d | 3.3V(V2) |
| 12 | BT_WAKE_HOST | SPI0_CS0n_M0 | GPIO0_A7_u | 3.3V(V2) |
| 13 | PWM0_CH7_M0 | I2C3_SCL_M0 | GPIO0_C0_d | 3.3V |
| 14 | PWM0_CH6_M0 | I2C3_SDA_M0 | GPIO0_C1_d | 3.3V |
| 15 | UART0_TX_M1 | JTAG_TCK_M2/CAN1_RXD_M0
/PWM2_CH6_M0(Untuk nyahpepijat) |
GPIO5_D6_u | 3.3V |
| Pin | isyarat | Penerangan atau fungsi | siri GPIO | IO Voltage |
| 16 | UART0_RX_M1 | JTAG_TMS_M2/CAN1_TXD_M0 /PWM2_CH7_M0 (For debug) | GPIO5_D7_u | 3.3V |
| 17 | SAI0_MCLK_M0_3 V3 | PWM2_CH6_M1 | GPIO7_A2_d | 3.3V |
| 18 | SAI0_SCLK_M0_3V 3 | PWM2_CH4_M1 | GPIO7_A0_d | 3.3V |
| 19 | SAI0_SDI3_M0_3V 3 | SAI0_SDO1_M0/PDM_SDI3_M 0/UART2_RTSN_M1 | GPIO7_A7_d | 3.3V |
| 20 | SAI0_SDO0_M0_3V 3 | DSM_AUD_LP | GPIO7_A5_d | 3.3V |
| 21 | SAI0_LRCK_M0_3V 3 | DSM_AUD_LN/PWM2_CH7_M1 | GPIO7_A3_d | 3.3V |
| 22 | PDM_SDI1_3V3 | SAI0_SDI1_M0/SAI0_SDO3_M 0/DSM_AUD_RP/I2C1_SDA_M
3/UART2_TX_M1 |
GPIO7_B1_d | 3.3V |
| 23 | PDM_CLK1_3V3 | I2C4_SCL_M3 /PWM2_CH5_M1 | GPIO7_A1_d | 3.3V |
| 24 | PDM_SDI2_3V3 | SAI0_SDI2_M0/SAI0_SDO2_M 0/DSM_AUD_RN/I2C1_SCL_M
3/UART2_RX_M1 |
GPIO7_B0_d | 3.3V |
| 25 | PDM_SDI0_3V3 | SAI0_SDI0_M0 | GPIO7_A6_d | 3.3V |
| 26 | PDM_CLK_3V3 | I2C4_SDA_M3 /UART2_CTSN_M1 | GPIO7_A4_d | 3.3V |
| 27 | I2C2_SDA_3V3 | PWM0_CH5_M0 | GPIO0_D1_d | 3.3V |
| 28 | I2C2_SCL_3V3 | PWM0_CH4_M0 | GPIO0_D0_d | 3.3V |
| 29 | USB_HOST_DP | 1.8V | ||
| 30 | USB_HOST_DM | 1.8V | ||
| 31 | GND | tanah | 0V | |
| 32 | OTG_DP | Boleh digunakan untuk muat turun | 1.8V | |
| 33 | OTG_DM | Boleh digunakan untuk muat turun | 1.8V | |
| 34 | OTG_DET(V2) | OTG VBUS DET IN | 3.3V(V2) | |
| 35 | OTG_ID | 1.8V | ||
| 36 | SPI0_CS1n_M1 | SAI1_MCLK_M1 /UART4_TX_M0 | GPIO4_A3_d | 1.8V |
| 37 | VCC3V3_SYS | Input Kuasa Utama 3.3V | 3.3V | |
| 38 | VCC3V3_SYS | Input Kuasa Utama 3.3V | 3.3V | |
| 39 | USB_CTRL_3V3 | PWM0_CH3_M0 /UART1_CTSN_M0 |
GPIO0_C7_d |
3.3V |
| 40 | SDMMC0_DET | PWM1_CH0_M0 | GPIO0_A5_u | 3.3V(V2) |
| 41 | CLKO_32K | Keluaran jam RTC | GPIO0_A2_z | 3.3V(V2) |
| 42 | nRESET | Tetapkan semula input kunci | 3.3V(V2) |
| Pin | isyarat | Penerangan atau fungsi | siri GPIO | IO Voltage |
|
43 |
MIPI_CSI_RX0_CL KP | Input MIPI CSI0 atau LVDS0 | 0.6V | |
|
44 |
MIPI_CSI_RX0_CL KN | Input MIPI CSI0 atau LVDS0 | 0.6V | |
|
45 |
MIPI_CSI_RX0_D2 P | Input MIPI CSI0 atau LVDS0 | 0.6V | |
|
46 |
MIPI_CSI_RX0_D2 N | Input MIPI CSI0 atau LVDS0 | 0.6V | |
|
47 |
MIPI_CSI_RX0_D3 P | Input MIPI CSI0 atau LVDS0 | 0.6V | |
|
48 |
MIPI_CSI_RX0_D3 N | Input MIPI CSI0 atau LVDS0 | 0.6V | |
|
49 |
MIPI_CSI_RX0_D1 P | Input MIPI CSI0 atau LVDS0 |
0.6V |
|
|
50 |
MIPI_CSI_RX0_D1 N | Input MIPI CSI0 atau LVDS0 |
0.6V |
|
|
51 |
MIPI_CSI_RX0_D0 P | Input MIPI CSI0 atau LVDS0 |
0.6V |
|
|
52 |
MIPI_CSI_RX0_D0 N | Input MIPI CSI0 atau LVDS0 |
0.6V |
|
| 53 | GND | tanah | 0V | |
|
54 |
MIPI_CSI_RX1_D3 P | Input MIPI CSI1 atau LVDS1 | 0.6V | |
|
55 |
MIPI_CSI_RX1_D3 N | Input MIPI CSI1 atau LVDS1 | 0.6V | |
|
56 |
MIPI_CSI_RX1_CL KP | Input MIPI CSI1 atau LVDS1 | 0.6V | |
|
57 |
MIPI_CSI_RX1_CL KN | Input MIPI CSI1 atau LVDS1 | 0.6V | |
|
58 |
MIPI_CSI_RX1_D2 P | Input MIPI CSI1 atau LVDS1 | 0.6V | |
|
59 |
MIPI_CSI_RX1_D2 N | Input MIPI CSI1 atau LVDS1 | 0.6V | |
|
60 |
MIPI_CSI_RX1_D1 P | Input MIPI CSI1 atau LVDS1 | 0.6V | |
|
61 |
MIPI_CSI_RX1_D1 N | Input MIPI CSI1 atau LVDS1 | 0.6V | |
|
62 |
MIPI_CSI_RX1_D0 P | Input MIPI CSI1 atau LVDS1 | 0.6V | |
| 63 | MIPI_CSI_RX1_D0n | Input MIPI CSI1 atau LVDS1 | 0.6V | |
|
64 |
SDMMC0_D3_3V3 | UART3_TX_M0/UART4_CTSN_ M3/JTAG_TMS_M1 | GPIO2_A3_d | 3.3V |
| Pin | isyarat | Penerangan atau fungsi | siri GPIO | IO Voltage |
| 65 | SDMMC0_D2_3V3 | UART3_RX_M0/UART4_RTSN_ M3/JTAG_TCK_M1 | GPIO2_A2_d | 3.3V |
| 66 | SDMMC0_D1_3V3 | UART0_TX_M0/I2C0_SCL_M1 | GPIO2_A1_d | 3.3V |
| 67 | SDMMC0_D0_3V3 | UART0_RX_M0/I2C0_SDA_M1 | GPIO2_A0_d | 3.3V |
| 68 | SDMMC0_CMD_3V 3 | UART3_CTSN_M0 /UART4_TX_M3 | GPIO2_A5_d | 3.3V |
| 69 | SDMMC0_CLK_3V3 | UART3_RTSN_M0 /UART4_RX_M3 | GPIO2_A4_d | 3.3V |
| 70 | GND | tanah | 0V | |
| 71 | LED1/CFG_LDO0 | Ethernet LINK LED(PD4.7K) | 3.3V | |
| 72 | LED2/CFG_LDO1 | Ethernet SPEED LED(PU4.7K) | 3.3V | |
| 73 | MDI0 + | Isyarat MDI Ethernet | 0.6V | |
| 74 | MDI0- | Isyarat MDI Ethernet | 0.6V | |
| 75 | MDI1 + | Isyarat MDI Ethernet | 0.6V | |
| 76 | MDI1- | Isyarat MDI Ethernet | 0.6V | |
| 77 | MDI2 + | Isyarat MDI Ethernet | 0.6V | |
| 78 | MDI2- | Isyarat MDI Ethernet | 0.6V | |
| 79 | MDI3 + | Isyarat MDI Ethernet | 0.6V | |
| 80 | MDI3- | Isyarat MDI Ethernet | 0.6V | |
| 81 | I2C1_SCL_M2 | UART4_CTSN_M0 | GPIO4_A1_u | 1.8V |
| 82 | I2C1_SDA_M2 | UART4_RTSN_M0 | GPIO4_A0_u | 1.8V |
| 83 | MIPI_CSI_PWDN0 | UART4_RX_M0 | GPIO4_A2_d | 1.8V |
| 84 | SPI0_CLK_M1 | SAI1_SDO_M1/UART5_RX_M0/ I2C4_SCL_M2 | GPIO4_A7_d | 1.8V |
| 85 | SPI0_MOSI_M1 | SAI1_SCLK_M1/I2C3_SCL_M1 | GPIO4_A4_d | 1.8V |
| 86 | SPI0_CS0n_M1 | SAI1_SDI_M1/UART5_TX_M0/I 2C4_SDA_M2 | GPIO4_A6_d | 1.8V |
| 87 | SPI0_MISO_M1 | SAI1_LRCK_M1/I2C3_SDA_M1 | GPIO4_A5_d | 1.8V |
| 88 | MIPI_CSI_CLK1 | UART5_RTSn_M0 | GPIO4_B0_d | 1.8V |
| 89 | MIPI_CSI_CLK0 | UART5_CTSn_M0 | GPIO4_B1_d | 1.8V |
| 90 | GND | tanah | 0V | |
| 91 | LCDC_D0_3V3 | VI_CIF_D0_M1/PWM2_CH4_M 0/UART4_RTSN_M1 | GPIO5_A0_d | 3.3V |
| 92 | LCDC_D1_3V3 | I2C5_SCL_M2/VI_CIF_D1_M1/ SAI2_SDI2_M1/PWM2_CH5_M 0/UART4_CTSN_M1 | GPIO5_A1_d | 3.3V |
| 93 | LCDC_D2_3V3 | VI_CIF_D2_M1/SAI2_SDI1_M1/ PWM0_CH5_M2/UART4_TX_M
1 |
GPIO5_A2_d | 3.3V |
| 94 | LCDC_D3_3V3 | SPI0_CSN0_M2/SAI2_MCLK_M 1/PWM0_CH4_M2/UART4_RX_ M1 | GPIO5_A3_d | 3.3V |
| Pin | isyarat | Penerangan atau fungsi | siri GPIO | IO Voltage |
| 95 | LCDC_D4_3V3 | SPI0_MOSI_M2/SAI2_SDO_M1
/PWM0_CH3_M1/UART5TX_M1 |
GPIO5_A4_d | 3.3V |
| 96 | LCDC_D5_3V3 | SPI0_MISO_M2/SAI2_SCLK_M 1/PWM0_CH2_M1/UART5_RX_
M1 |
GPIO5_A5_d | 3.3V |
| 97 | LCDC_D6_3V3 | SPI0_CLK_M2/SAI2_SDI0_M1/ PWM0_CH1_M1/UART5_RTSN
_M1 |
GPIO5_A6_d | 3.3V |
| 98 | LCDC_D7_3V3 | SPI0_CSN1_M2/VI_CIF_D3_M1
/SAI2_LRCK_M1/I2C5_SDA_M 2/PWM0_CH0_M1/UART5_CTS N_M1 |
GPIO5_A7_d | 3.3V |
| 99 | CAN_RX_3V3 | SPI1_CSN1_M2/I2C2_SCL_M1/
PWM0_CH7_M2/UART3TX_M1 |
GPIO5_D4_u | 3.3V |
|
100 |
CAN_TX_3V3 |
I2C2_SDA_M1/PWM1_CH3_M1
/UART3_RX_M1 |
GPIO5_D5_u |
3.3V |
|
101 |
LCDC_CLK_3V3 |
SPI1_MISO_M2/PWM1_CH0_M
1/UART3_CTSN_M1 |
GPIO5_D3_d |
3.3V |
|
102 |
LCDC_VSYNC_3V3 |
SPI1_MOSI_M2/PWM1_CH1_M
1/UART3_RTSN_M1 |
GPIO5_D2_d |
3.3V |
| 103 | MIPI_DSI_D2P | 0.6V | ||
| 104 | MIPI_DSI_D2N | 0.6V | ||
| 105 | MIPI_DSI_D1P | 0.6V | ||
| 106 | MIPI_DSI_D1N | 0.6V | ||
| 107 | MIPI_DSI_D0P | 0.6V | ||
| 108 | MIPI_DSI_D0N | 0.6V | ||
| 109 | MIPI_DSI_D3P | 0.6V | ||
| 110 | MIPI_DSI_D3N | 0.6V | ||
| 111 | MIPI_DSI_CLKP | 0.6V | ||
| 112 | MIPI_DSI_CLKN | 0.6V | ||
| 113 | ADCIN3 | Masukan ADC | 1.8V | |
| 114 | ADCIN2 | Masukan ADC | 1.8V | |
| 115 | ADCIN1 | Masukan ADC | 1.8V | |
| 116 | ADKEY_IN0 | Recovery mode set(PU 10K) | 1.8V | |
| 117 | GND | tanah | 0V | |
| 118 | SDIO_CLK | GPIO3_A0_d | 3.3V(V2) | |
| 119 | SDIO_CMD | GPIO3_A1_d | 3.3V(V2) | |
| 120 | SDIO_D0 | I2C1_SCL_M1 | GPIO3_A2_d | 3.3V(V2) |
| 121 | SDIO_D1 | I2C1_SDA_M1 | GPIO3_A3_d | 3.3V(V2) |
| 122 | SDIO_D2 | GPIO3_A4_d | 3.3V(V2) | |
| 123 | SDIO_D3 | GPIO3_A5_d | 3.3V(V2) | |
| 124 | UART2_RX_M0 | GPIO3_B0_d | 3.3V(V2) |
| Pin | isyarat | Penerangan atau fungsi | siri GPIO | IO Voltage |
| 125 | UART2_TX_M0 | SAI2_SDI2_M0 | GPIO3_B1_d | 3.3V(V2) |
| 126 | UART2_CTSN_M0 | GPIO3_A7_d | 3.3V(V2) | |
| 127 | UART2_RTSN_M0 | GPIO3_A6_d | 3.3V(V2) | |
|
128 |
PCM_TX |
SPI1_MOSI_M1/SAI2_SDO_M0
/PWM2_CH0_M0 |
GPIO3_B2_d |
3.3V(V2) |
|
129 |
PCM_SYNC |
SPI1_CSN0_M1/SAI2_LRCK_M
0/PWM2_CH3_M0/UART1_CTS N_M1/I2C4_SDA_M0 |
GPIO3_B5_d |
3.3V(V2) |
|
130 |
PCM_CLK |
SPI1_CLK_M1/SAI2_SCLK_M0/ PWM2_CH2_M0/UART1_RTSN
_M1/I2C4_SCL_M0 |
GPIO3_B4_d |
3.3V(V2) |
|
131 |
PCM_RX |
SPI1_MISO_M1/SAI2_SDI0_M0
/PWM2_CH1_M0 |
GPIO3_B3_d |
3.3V(V2) |
|
132 |
LCDC_D15_3V3 |
VI_CIF_D11_M1/PWM2_CH3_
M1/UART7_CTSN_M0 |
GPIO5_B7_d |
3.3V |
|
133 |
LCDC_D14_3V3 |
VI_CIF_D10_M1/PWM2_CH2_
M1/UART7_RTSN_M0 |
GPIO5_B6_d |
3.3V |
| 134 | LCDC_D13_3V3 | VI_CIF_D9_M1/UART7_RX_M0 | GPIO5_B5_d | 3.3V |
| 135 | LCDC_D12_3V3 | VI_CIF_D8_M1/UART7_TX_M0 | GPIO5_B4_d | 3.3V |
|
136 |
LCDC_DEN_3V3 |
SPI1_CSN0_M2/I2C3_SCL_M2/
PWM0_CH6_M2 |
GPIO5_D0_d |
3.3V |
|
137 |
LCDC_D10_3V3 |
VI_CIF_D6_M1/PWM2_CH0_M
1/UART6_RTSN_M0 |
GPIO5_B2_d |
3.3V |
| 138 | LCDC_D9_3V3 | VI_CIF_D5_M1/UART6_RX_M0 | GPIO5_B1_d | 3.3V |
| 139 | LCDC_D8_3V3 | VI_CIF_D4_M1/UART6_TX_M0 | GPIO5_B0_d | 3.3V |
|
140 |
LCDC_D11_3V3 |
VI_CIF_D7_M1/PWM2_CH1_M
1/UART6_CTSN_M0 |
GPIO5_B3_d |
3.3V |
|
141 |
LCDC_HSYNC_3V3 |
SPI1_CLK_M2/I2C3_SDA_M2/P
WM1_CH2_M1 |
GPIO5_D1_d |
3.3V |
|
142 |
LCDC_D16_3V3 |
VI_CIF_D12_M1
/PWM3_CH0_M1 |
GPIO5_C0_d |
3.3V |
|
143 |
LCDC_D17_3V3 |
VI_CIF_D13_M1
/PWM3_CH1_M1 |
GPIO5_C1_d |
3.3V |
|
144 |
LCDC_D18_3V3 |
VI_CIF_D14_M1
/PWM3_CH2_M1 |
GPIO5_C2_d |
3.3V |
| Nota:
1. GPIO jldtage tukar kepada 3.3V untuk bertanda (V2). |
||||
Development Kit (Idea1126B-P)
Panduan Reka Bentuk Perkakasan
Rujukan Litar Periferi
Litar Kuasa Utama
Litar Nyahpepijat
Litar Antaramuka OTG USB
Jejak PCB
Ciri-ciri Elektrik Produk
Pelesapan dan Suhu
| Simbol | Parameter | Min | Taip | Maks | Unit |
| VCC3V3_SYS | Sistem IO Voltage | 3.3-5% | 3.3 | 3.3 + 5% | V |
| Isys_in | VCC3V3_SYS input Semasa | 850 | mA | ||
| Ta | Suhu Operasi | -20 | 70 | °C | |
| Tstg | Suhu Penyimpanan | -40 | 85 | °C |
Kebolehpercayaan Ujian
| Ujian Pengendalian Suhu Tinggi | ||
| kandungan | Beroperasi 8j dalam suhu tinggi | 55°C±2°C |
| Hasilnya | lulus | |
| Ujian Kehidupan Operasi | ||
| kandungan | Beroperasi di dalam bilik | 120j |
| Hasilnya | lulus | |
Soalan Lazim
What is the memory organization of CM1126B-P?
The board supports LPDDR4 RAM up to 4GB and EMMC 4.51 up to 256GB.
Apakah voltage requirement for the signal and WIFI/BT module's GPIO?
Jilidtage must be changed to 3.3V for the signal and the WIFI/BT module's GPIO.
Dokumen / Sumber
 |
Boardcon Embedded Design CM1126B-P Reference Module [pdf] Manual Pengguna CM1126B-P Reference Module, CM1126B-P, Reference Module, Module |