AXIS CP11W Window Camera
Berakhirview
The InstaVision AI Window Camera installs via a magnetic tile connection, then is configured in the InstaVision app for Bluetooth-based device discovery and Wi‑Fi connectivity so you can view suapan kamera langsung.
Spesifikasi
| Wi‑Fi band support | 2.4 GHz and 5 GHz (Wi‑Fi) |
| Butang set semula | Long press 5 seconds to restore factory settings (device gives a voice prompt) |
| Slot kad TF | Micro TF card (for video storage and playback) |
| kuasa | Input kuasa |
| Penemuan Bluetooth | Required for device discovery via BLE |
Quick Setup & Use
- Install the ceramic (porcelain) tile: tear off the surface paper, paste the tile at the appropriate window position, ensure it is firmly attached and flat, and make sure the side with the magnetic ring faces into the room.
- Connect the camera: bring the camera’s magnetic-ring side close to the tile’s magnetic ring and complete connection via magnetic adsorption; ensure the camera is firmly installed and angled as required.
- Install the InstaVision app on your iPhone/Android.
- Open the app, register or log in, then go to Home Page > Add Camera and follow the preparation instructions to power on the camera properly.
- Enable Bluetooth access when prompted (required for discovery via BLE). If the device is not found, long press the reset button for 5 seconds to restore factory settings and try again.
- Connect to Wi‑Fi: select a nearby 2.4 GHz & 5 GHz Wi‑Fi network, enter the password, and wait for connection confirmation sound.
- Open the main interface to view Langsung View (live camera feed).
Penerangan antara muka
1. Butang set semula
2. Slot kad TF
3. Bekalan kuasa
The working state of the device, long press
5 seconds to restore the factory settings,
the camera will have a voice prompt
siaran.
Micro TF card, storage video and playback
video.
Input kuasa
This manual is suitable for various types of cameras
(The appearance may be different due to different batches, The
details are subiect to the receipt-This manual is only for the
installation instructions of this series of equipment)
Pemasangan dan penempatan
A1 Window Camera
1. Preparation: Make sure you have prepared this tile and the
supporting camera.
2. Porcelain tile installation: carefully tear off the centrifugal paper on
the surface of the porcelain tile, pay attention to avoid touching the
adhesive surface. Paste the porcelain tile in the appropriate position
of the window, make sure that it is firmly pasted and the surface is
flat. Make sure that the side of the tile with the magnetic ring is facing
towards the room when pasting.
3. Camera Connection: Take out the camera, put the side corresponding
to the magnetic ring close to the magnetic ring of the ceramic tile, and
complete the connection through magnetic adsorption. Ensure that the
camera is firmly installed and the position angle meets the requirements
penggunaan.
Pemasangan Apl
1. Download and Install: Download and install the
InstaVision app by scanning the QRcode for the Appl
Store or Google play Store.
2. Account Registration: Open the app and register a new
account or log in to an existing account.
5. Add Camera: Navigate to the Home Page within the app.
Locate and select “Add Camera” then go through preparation
instructions to power on your camera properly,
access, which is required for device discovery. Do not skip this step.Ensn
Bluetooth access is enabled as instructed, allowing the app to discover
device via BCE,
to cn SLsto=th
* If you can’t find the device in the above steps, press and hold tt
reset button for 5 seconds, restore the camera to factory settin
dan cuba lagi.
5. Connect to Wi-Fi: The app Will automatically scan for nearby
2.4 GHz & 5 GHz Wi-Fi routers.Choose your desired Wi-Fi
network from the list provided. Please double-check your
Camera’s capability in terms of 2.4 GHz & 5 GHZ.
A1 Camera use Instruction video
If you need further assistance, please contact our customer
support team. You can send an email or call customer service
through the “Contact Us” page within the app.
Thank you for choosing InstaVision App. We are committed to
providing the best user experience and security protection. If
you have any suggestions or feedback, please feel free to
hubungi kami.
Untuk bantuan tambahan, sila hubungi pasukan sokongan pelanggan kami:
Nota: Peralatan ini telah diuji dan didapati mematuhi had
untuk peranti digital Kelas B, menurut bahagian 15 Peraturan FCC. Had ini
dirancang untuk memberikan perlindungan yang wajar terhadap gangguan berbahaya
di tempat kediaman. Peralatan ini menjana, menggunakan dan dapat memancar
tenaga frekuensi radio dan, jika tidak dipasang dan digunakan mengikut
arahan, boleh menyebabkan gangguan berbahaya kepada komunikasi radio.
Walau bagaimanapun, tidak ada jaminan bahawa gangguan tidak akan berlaku dalam keadaan tertentu
pemasangan. Sekiranya peralatan ini menyebabkan gangguan berbahaya kepada radio atau
television reception, which can be determined by turning the equipment Off
dan seterusnya, pengguna digalakkan untuk cuba memperbaiki gangguan oleh satu atau
lebih daripada langkah-langkah berikut:
— Arahkan semula atau letak semula antena penerima.
— Tingkatkan pengasingan antara peralatan dan penerima.
— Connect the equipment into an outlet on o circuit different from that
yang mana penerima disambungkan.
— Rujuk peniaga atau juruteknik radio/TV yang berpengalaman untuk mendapatkan bantuan.
Important: Change or modifications not expressly approved by the
pengilang yang bertanggungjawab untuk pematuhan boleh membatalkan kuasa pengguna untuk
mengendalikan peralatan.
Peranti ini mematuhi bahagian 15 Peraturan FCC. Operasi adalah
tertakluk kepada dua syarat berikut:
(1) Peranti ini mungkin tidak menyebabkan gangguan berbahaya, dan
(2) peranti ini mesti menerima sebarang gangguan yang diterima, termasuk gangguan
yang boleh menyebabkan operasi yang tidak diingini.
Dokumen / Sumber
 | CP11W Window Camera |
Rujukan
- apps.apple.com/in/app/instavision-smart-safe-home/id6479250008apps.apple.com
- Manual Penggunamanual.tools