IBELL YO2100 High Pressure Car Washer Instruction Manual

pengenalan

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your IBELL YO2100 High Pressure Car Washer. Please read it thoroughly before first use and keep it for future reference. Understanding the instructions will ensure optimal performance and extend the lifespan of your unit.

Arahan Keselamatan Penting

Sentiasa ikuti langkah berjaga-jaga keselamatan asas apabila menggunakan produk ini untuk mengurangkan risiko kecederaan atau kerosakan.

• Read all instructions carefully before operating the pressure washer.
• Wear appropriate personal protective equipment, including safety glasses or goggles, to protect against high-pressure spray.
• Jauhkan kanak-kanak dan haiwan peliharaan dari kawasan operasi.
• Jangan sekali-kali halakan pistol semburan ke arah orang, haiwan atau peranti elektrik.
• Ensure the power cord and extension cords are rated for outdoor use and are in good condition.
• Always disconnect the power supply before performing any maintenance, cleaning, or when the unit is not in use.
• Do not operate the pressure washer if any parts are damaged or missing.
• Use only clean water as the water source.

Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• IBELL YO2100 High Pressure Washer Unit
• 8-meter High-Pressure Outlet Hose
• Pistol Sembur
• Spray Gun Extension Rod
• Paip Inlet
• Penapis Masuk
• Penyambung Masuk
• Ketik Penyambung
• Bucket Water Filter
• Foam Spray Bottle

Image: All included accessories for the IBELL YO2100 High Pressure Car Washer, including hoses, connectors, spray gun, and foam bottle.

Persediaan dan Perhimpunan

Follow these steps to assemble your pressure washer before first use:

1. Attach the inlet pipe to the tap connector. If drawing water from a bucket, connect the bucket filter to the inlet pipe.
2. Attach the inlet pipe assembly to the inlet connector on the pressure washer.
3. Screw the inlet filter onto the main unit's water inlet port.
4. Connect the inlet connector securely to the inlet filter.
5. Push and screw the 8-meter high-pressure outlet hose pipe with its connector onto the main unit's outlet port.
6. Before connecting the spray gun, turn on the machine briefly (for a few seconds) to release any trapped air from the hose. This primes the pump.
7. Attach the high-pressure outlet hose pipe to the spray gun.
8. Connect the spray gun extension rod to the spray gun.
9. Attach the desired nozzle to the spray gun extension rod.
10. Ensure all quick connections are properly linked without any gaps to prevent leaks and ensure full pressure.

Image: Visual guide demonstrating the assembly steps for the IBELL YO2100 High Pressure Car Washer, from connecting hoses to attaching the spray gun and nozzle.

Arahan Operasi

Memulakan Mesin Cuci Tekanan

1. Ensure all connections are secure and the water supply is turned on.
2. Palamkan kord kuasa ke soket elektrik yang dibumikan yang sesuai.
3. Tekan suis ON/OFF untuk menghidupkan unit.
4. Squeeze the trigger on the spray gun to begin spraying. The motor will start automatically.

Using the Foam Bottle

1. Fill the foam bottle with an appropriate, pressure washer-safe cleaning solution.
2. Attach the foam bottle to the spray gun.
3. Operate the pressure washer to apply foam evenly to the surface.

Melaraskan Muncung Semburan

The adjustable spray nozzle allows for various spray patterns, from a concentrated jet for tough dirt and grime to a wider fan for general cleaning and rinsing. Rotate the nozzle head to adjust the spray pattern as needed for your cleaning task.

Menghentikan Mesin Cuci Tekanan

1. Release the trigger on the spray gun. The motor will stop automatically due to the Total Stop System.
2. Press the ON/OFF switch to turn off the unit completely.
3. Cabut palam kord kuasa daripada salur keluar elektrik.
4. Turn off the water supply to the pressure washer.
5. Squeeze the trigger briefly to release any remaining pressure in the system before disconnecting hoses.

Penyelenggaraan

Membersihkan Penapis

Regularly inspect and clean the inlet filter and bucket filter (if used) to prevent blockages from debris and ensure optimal water flow and performance. Rinse them thoroughly with clean water.

Hose and Nozzle Care

After each use, flush the high-pressure hose and nozzles with clean water to remove any chemical residues or debris. Inspect the nozzle opening for any blockages and clear them if necessary.

Penyimpanan

Store the pressure washer in a dry, frost-free environment. Disconnect all hoses and drain any remaining water from the pump and hoses to prevent damage from freezing temperatures. Coil hoses neatly and store accessories in a safe place.

Menyelesaikan masalah

Rujuk jadual di bawah untuk isu biasa dan penyelesaiannya.

Spesifikasi Teknikal

Imej: Selesaiview of key specifications for the IBELL High Pressure Washer, including power, flow rate, max pressure, weight, and hose length.

Image: Diagram showing the physical dimensions (length, width, height) of the IBELL YO2100 Pressure Washer.

Maklumat Waranti

The IBELL YO2100 High Pressure Car Washer comes with a 1-year warranty. This includes a 6-month standard warranty and an additional 6 months upon product registration. To avail the extended warranty, registration must be completed within 30 days from the date of purchase.

Please retain your original purchase receipt for all warranty claims. The warranty covers manufacturing defects and does not cover damage caused by misuse, neglect, or unauthorized repairs.

Sokongan Pelanggan

For any assistance, queries, or technical support regarding your IBELL YO2100 High Pressure Car Washer, please contact our dedicated customer service team. We are here to help ensure your satisfaction.

Customer Service Support: +91 98956 00055

Image: IBELL customer service contact details for aftercare support.