pengenalan
This manual provides detailed instructions for the safe and efficient use of your Fosmon Indoor Outdoor Remote Control Outlet Switch Combo. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Maklumat Keselamatan
Patuhi langkah keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada produk:
- Jangan rendam produk dalam air atau cecair lain.
- Ensure the product is plugged into a GFCI (Ground Fault Circuit Interrupter) approved outlet when used outdoors.
- When using outdoors, position the outlet hanging down to prevent moisture from entering the plug.
- Do not exceed the maximum electrical ratings specified in this manual.
- Jauhkan daripada kanak-kanak.
- Jangan buka atau ubah suai produk.


Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej anda:
- 3x Remote Control Outlet Receivers
- 3x Remote Control Transmitters
- 3x CR2032 Batteries (pre-installed in remotes)
Ciri-ciri Produk
- Wireless remote control for indoor and outdoor lighting and appliances.
- Weather-resistant construction for outdoor applications.
- Grounded 3-prong AC plug for standard outlets.
- Pair and un-pair functionality for customizable control.
- Operating range of up to 30 meters (98.4 feet) in open areas.
- Compact remote design.

Spesifikasi
| Max Range (Open Area) | 30 meter / 98.4 kaki |
| Bateri Jauh | CR2032 (termasuk) |
| Gunakan Persekitaran | Luaran dan Dalaman |
| Jenis Outlet | Single 125VAC outlet |
| Maksimum Semasa | 15A Maks |
| Penilaian Elektrik | 125VAC, 60HZ, 15A (Resistive, General purpose) 125VAC, 60HZ, 10A / 1250W (Tungsten) 125VAC, 60HZ, 1/2HP TV-5 |
| Kekerapan | 433.92MHz |
| Suhu Operasi | -13°F~104°F / -25°C~40°C |
| Pensijilan | Tersenarai ETL |
Arahan Persediaan
Gandingan Awal
The remote control outlets and remotes are pre-paired from the factory. If re-pairing is needed or if you wish to customize your control setup, follow these steps:
- Plug the remote control outlet receiver into an electrical wall outlet. The indicator light on the receiver will turn on.
- Within 29 seconds of plugging in the receiver, press the ON or OFF button on the desired remote control transmitter.
- The indicator light on the receiver will blink once to confirm successful pairing.
Note: Multiple outlets (receivers) can be paired to one remote, and multiple remotes can be paired to one outlet.

Menyahgandingkan
To unpair a remote from an outlet:
- Unplug the remote control outlet receiver from the wall outlet.
- Press and hold the ON button on the remote control transmitter.
- While still holding the ON button, plug the remote control outlet receiver back into the wall outlet.
- Continue holding the ON button for approximately 5 seconds until the indicator light on the receiver blinks rapidly, then release. This indicates successful unpairing.
Pertimbangan Pemasangan
- Penggunaan Dalaman: Plug the remote control outlet into any standard 3-prong wall outlet.
- Penggunaan Luaran:
- Always plug into a GFCI approved outlet.
- Hang the outlet with the plug facing downwards to prevent water entry.
- Ensure the connected appliance is also suitable for outdoor use.


Arahan Operasi
Once the remote control outlet is plugged in and paired with its remote, operation is straightforward:
- Tekan ke ON button on the remote control transmitter to turn on the connected appliance or light.
- Tekan ke DIMATIKAN button on the remote control transmitter to turn off the connected appliance or light.
The remote can control the outlet from a distance of up to 30 meters (98.4 feet) in open areas, allowing for convenient control of hard-to-reach outlets or outdoor lighting from indoors or a vehicle.

Penyelenggaraan
Pembersihan
To clean the remote control outlet or transmitter, wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
Penggantian Bateri (Kawalan Jauh)
The remote control uses a CR2032 battery. If the remote's range decreases or it stops responding, the battery may need replacement.
- Cari petak bateri di belakang alat kawalan jauh.
- Gunakan pemutar skru kecil atau syiling untuk membuka petak.
- Keluarkan bateri CR2032 lama.
- Masukkan bateri CR2032 baharu dengan bahagian positif (+) menghadap ke atas.
- Tutup petak bateri dengan selamat.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Outlet does not respond to remote. |
|
|
| Outlet indicator light does not turn on. |
|
|
| Jarak jauh yang dikurangkan. |
|
|
Waranti dan Sokongan
This Fosmon product includes a limited lifetime warranty. For more details regarding the warranty policy or for technical support, please visit the official Fosmon webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.
Fosmon Webtapak: www.fosmon.com
Perkhidmatan Pelanggan: Refer to the Fosmon webtapak untuk maklumat hubungan.





