1. Pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of the Lilytech ZL-7903A Automatic Temperature and Humidity Incubator Controller. The ZL-7903A is a multifunctional PID controller designed for precise environmental management in incubators, ensuring optimal conditions for various applications. It integrates temperature control, humidity control, egg turning, ventilation, and alarm functions.
2. Produk Lebihview
The ZL-7903A controller features a clear digital display and intuitive button interface for easy programming and monitoring. It comes equipped with a ZL-SHr05J temperature and humidity sensor for accurate environmental readings.
Rajah 2.1: The ZL-7903A controller unit shown alongside the ZL-SHr05J combined temperature and humidity sensor. The controller features a digital display and control buttons.
Rajah 2.2: The ZL-7903A controller with its sensor cable and a protective cover for the sensor element. This image illustrates the complete package including the wiring.
Rajah 2.3: A terperinci view of the ZL-7903A controller's digital display, showing current temperature (14.8°C) and humidity (64.3%), along with set points (37.8°C, 50%) and a countdown timer.
3. Spesifikasi
- model: ZL-7903A
- Input Voltage: 100-240Vac
- Jenis Kawalan: PID (Proportional-Integral-Derivative) for Temperature and Humidity
- Jenis Paparan: digital
- Penderia: ZL-SHr05J (Combined Temperature and Humidity Sensor)
- Max Measuring Temperature: 70°C - 99°C
- gaya: Terbenam
- Panjang Kabel Sensor: 2 meter
- Fungsi: Temperature Control, Humidity Control, Egg Turning, Ventilation, Illumination, Alarms, Door Switch Input
4. Pemasangan dan Persediaan
The ZL-7903A is designed for embedded installation. Ensure proper ventilation around the unit when mounting. All wiring should be performed by a qualified professional to prevent electrical hazards and ensure correct functionality.
4.1 Gambarajah Pendawaian
Refer to the following diagrams for correct electrical connections. The controller requires a 100-240Vac power input. Connect all external components such as heaters, fans, egg-turning motors, and sensors according to the specified terminals.
Rajah 4.1: belakang view of the ZL-7903A controller, showing the terminal block and an integrated wiring diagram for various connections including power, sensors, and output devices.
Rajah 4.2: A detailed schematic of the ZL-7903A wiring. This diagram illustrates connections for 100-240Vac input, heater (R1, R10), auxiliary heater, ventilation (R2), humidity control (R3), illumination (R4), egg turning (R5, R6, R7), alarms (R8, R9), door switch (S1), humidity sensor, temperature sensor, SSR, egg-turning motor, and exhaustion fan.
4.2 Sambungan Sensor
The ZL-SHr05J sensor connects to the dedicated sensor port. Ensure the connector is securely seated. The sensor provides both temperature and humidity readings to the controller.
Rajah 4.3: Comparison of ZL-SHr05J (green label) and ZL-SHr05P (red label) sensors. The ZL-SHr05J is included with this model and features VCC (5V), GND, and SDA connections.
5. Operasi
The ZL-7903A controller features a user-friendly interface with dedicated buttons for various functions:
- Butang Kuasa: Menghidupkan atau mematikan unit.
- Butang Tetapkan: Enters parameter setting mode.
- Anak panah atas/bawah: Adjusts values or navigates menus.
- Butang Fn (Fungsi): Accesses additional functions or confirms selections.
Detailed programming instructions for setting temperature, humidity, egg-turning intervals, ventilation cycles, and alarm thresholds are provided in the full user manual (not included here). Consult the manufacturer's comprehensive guide for specific parameter adjustments.
6. Penyelenggaraan
To ensure the longevity and accuracy of your ZL-7903A controller:
- Pembersihan: Lap paparan dan casing dengan kain lembut dan kering. Elakkan pembersih atau pelarut yang melelas.
- Penjagaan Sensor: Keep the temperature and humidity sensor clean and free from dust or debris. Do not immerse the sensor in liquids.
- Keadaan Persekitaran: Operate the controller within its specified environmental limits (temperature, humidity) to prevent damage.
7. Penyelesaian masalah
If you encounter issues with your ZL-7903A controller, consider the following common troubleshooting steps:
- Tiada Kuasa: Check the power supply connection and ensure the unit is properly plugged into a 100-240Vac source.
- Bacaan yang salah: Verify that the ZL-SHr05J sensor is correctly connected and free from obstructions or damage.
- Output Tidak Diaktifkan: Check wiring for heaters, fans, and motors. Ensure set points are correctly configured and not in an alarm state.
- Ralat Paparan: Refer to the full user manual for specific error codes and their meanings.
Untuk isu yang berterusan, hubungi sokongan pelanggan atau juruteknik bertauliah.
8. Waranti dan Sokongan
Warranty information for the Lilytech ZL-7903A controller is typically provided by the seller or manufacturer at the time of purchase. Please retain your proof of purchase for warranty claims.
For technical support, product inquiries, or to obtain a complete version of the user manual, please contact the manufacturer or your authorized distributor.
