be quiet! Pure Loop 2 240mm All-in-One Water Cooling System

1. Pengenalan

The be quiet! Pure Loop 2 240mm is an advanced all-in-one water cooling system designed to provide superior cooling performance for your desktop computer's central processing unit (CPU). This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your cooling system.

Ciri-ciri utama termasuk:

• Two Pure Wings 3 120mm PWM high-speed fans for high static pressure and quiet operation.
• Doubly decoupled PWM pump to minimize vibrations.
• ARGB illumination on the cooling block for a distinct aesthetic.
• Easy-to-access refill port and included coolant bottle for extended lifespan.
• Flexible sleeved tubes and convenient mounting for easy handling.

2. Maklumat Keselamatan

Please read and understand all safety instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or damage to the product and connected components.

• Pastikan sistem komputer anda dimatikan dan dicabut dari soket dinding sebelum dipasang.
• Avoid touching electrical components directly.
• Do not open the pump or radiator. Tampering with the sealed unit may void the warranty and cause leaks.
• Jauhkan produk daripada cecair dan suhu yang melampau.
• Handle the radiator fins with care to avoid bending or damage.
• Gunakan hanya perkakasan pemasangan yang disediakan.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

• be quiet! Pure Loop 2 240mm All-in-One Water Cooling System (Radiator, Pump/Cold Plate, Tubing)
• 2x Pure Wings 3 120mm PWM high-speed fans
• Mounting hardware for Intel (LGA 1700, 1200, 1150, 1151, 1155) and AMD (AM5, AM4) sockets
• Picagari pes haba
• Coolant bottle for refilling
• ARGB/PWM hub (for Pure Loop 2 FX models, may vary)
• Fan screws and radiator mounting screws

Image: All components included with the be quiet! Pure Loop 2 240mm AIO.

4. Persediaan dan Pemasangan

Follow these steps to properly install your be quiet! Pure Loop 2 240mm water cooling system. Refer to the video for visual guidance.

4.1. Sediakan Papan Induk dan CPU

Ensure your CPU is correctly installed in its socket. For AMD AM5/AM4, remove the stock cooler mounts from the motherboard. For Intel LGA 1700, install the appropriate backplate and standoffs.

4.2. Sapukan Thermal Paste

Apply a small amount of thermal paste (included) to the center of your CPU's integrated heat spreader (IHS). A pea-sized dot or a thin line is usually sufficient. Do not spread the paste manually; the pressure from the cold plate will distribute it evenly.

4.3. Install Fans on Radiator

Attach the two Pure Wings 3 120mm PWM fans to the radiator using the provided fan screws. Ensure the fan cables are oriented for optimal cable management within your PC case.

Image: Close-up of Pure Wings 3 120mm PWM fans, showing their design for high static pressure.

4.4. Mount Radiator in PC Case

Secure the radiator, with fans attached, to an available mounting location in your PC case (e.g., top, front, or rear). Use the longer radiator mounting screws. Ensure proper airflow direction (intake or exhaust) based on your case's cooling strategy.

4.5. Install Pump/Cold Plate

Carefully place the pump/cold plate assembly onto the CPU, aligning the mounting holes with the standoffs. Tighten the screws in a diagonal pattern, applying even pressure until snug. Do not overtighten.

Image: Diagram illustrating the internal components and flow path of the Pure Loop 2 pump.

4.6. Sambungkan Kabel

Connect the fan PWM cables to your motherboard's fan headers or the included ARGB/PWM hub. Connect the pump's PWM cable to the dedicated AIO_PUMP or CPU_OPT header on your motherboard. Connect the ARGB cable from the pump to a compatible 3-pin 5V ARGB header on your motherboard or the ARGB/PWM hub.

For detailed installation steps, watch the official installation video:

5. Arahan Operasi

Once installed, the Pure Loop 2 240mm operates automatically based on your motherboard's fan and pump control settings. For optimal performance and acoustics, it is recommended to configure fan curves in your motherboard's BIOS/UEFI or through compatible software.

5.1. ARGB Illumination Control

The ARGB illumination on the cooling block can be controlled via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync). Connect the ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard to synchronize lighting effects.

Image: The ARGB illuminated pump head of the Pure Loop 2, showcasing its customizable lighting.

See the impressive lighting and superior cooling in action:

6. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your water cooling system.

6.1. Coolant Refill

The Pure Loop 2 features an easy-to-access refill port on the radiator. Over time, a small amount of coolant may evaporate. Use the included coolant bottle to top up the system when necessary. Refer to the installation video for the location of the refill port.

Image: Close-up of the refill port on the radiator, designed for easy coolant top-up.

6.2. Pembersihan

Bersihkan habuk daripada sirip radiator dan bilah kipas secara berkala menggunakan udara termampat atau berus lembut. Pastikan sistem dimatikan sebelum membersihkan.

7. Penyelesaian masalah

If you encounter issues with your Pure Loop 2, try the following steps:

• Tiada Kuasa/Kipas Tidak Berputar: Check all power connections (SATA power for ARGB/PWM hub, fan headers on motherboard). Ensure the pump is connected to the AIO_PUMP header.
• Suhu CPU Tinggi: Verify that the pump is running and the fans are spinning. Re-check thermal paste application and ensure the cold plate is making good contact with the CPU. Confirm radiator is not obstructed by dust.
• ARGB Not Working: Ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header on your motherboard or hub. Check motherboard RGB software settings.
• Bunyi Luar Biasa: Check for loose fan screws or obstructions in fan blades. Ensure the pump is securely mounted and not vibrating against other components.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information and technical support, please refer to the official be quiet! webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk tuntutan waranti.

Additional protection plans may be available through your retailer:

• Pelan Perlindungan 3 Tahun
• Pelan Perlindungan 4 Tahun
• Melindungi Lengkap: Satu pelan meliputi semua pembelian masa lalu dan masa hadapan yang layak

Untuk bantuan lanjut, lawati be quiet! Store on Amazon.