Nitecore TUP2 1200 Lumen Rechargeable Multi-Color Temperature Keychain Flashlight User Manual

1. Pengenalan

The Nitecore TUP2 is a compact and powerful rechargeable keychain flashlight designed for everyday carry. It features a maximum output of 1200 lumens, multiple color temperature options (warm, neutral, cool white), an OLED real-time display, and USB-C fast charging. This manual provides detailed instructions for the proper use, maintenance, and care of your TUP2 flashlight.

2. Kandungan Pakej

• Nitecore TUP2 Flashlight
• Kabel Pengecas USB-C
• Papan Kekunci

Image: The Nitecore TUP2 flashlight, along with its included USB-C charging cable and a Nitecore sticker.

3. Ciri-ciri Utama

• Powerful 1200 Lumens Output: Delivers an ultra-bright beam reaching up to 136 yards.
• Multi-Color Temperature LEDs: Easily switch between warm (3000K), neutral white (4500K), and cool white (6500K) lighting.
• OLED Display & Smart Interface: Real-time screen shows brightness, color temperature, remaining runtime, and battery status.
• USB-C Fast Charging: Built-in rechargeable battery charges fully in under 1.5 hours.
• Compact & Durable Design: Measures only 2.76" and weighs 2.05 oz; IP54 water-resistant and impact-resistant up to 2 meters.

Image: The Nitecore TUP2, emphasizing its Multiple Color Temperatures (MCT) and 1200 lumen output.

Image: A visual representation of the TUP2's four LEDs, capable of producing three distinct color temperatures: 3000K Warm Light, 4500K Neutral White, and 6500K Cool White.

Image: The OLED display of the Nitecore TUP2, illustrating its ability to show real-time information such as current color temperature, unlock prompts, battery level, current brightness level, remaining runtime, and lockout mode status.

4. Arahan Operasi

4.1 Hidupkan/Mati Kuasa

• Untuk Menghidupkan: Short press the Power Button ().
• Untuk Mematikan: Short press the Power Button () while the light is on.

4.2 Tahap Kecerahan

When the light is on, short press the Mode Button () to cycle through brightness levels: ULTRALOW - LOW - MID - HIGH.

4.3 Direct Access Modes

• ULTRALOW: When the light is off, long press the Power Button () to directly access ULTRALOW mode.
• TURBO: When the light is on, long press the Mode Button () to directly access TURBO mode.

Image: The Nitecore TUP2 demonstrating direct access to its TURBO mode (1200 lumens) for long-distance lighting and ULTRALOW mode (1 lumen) for close-range illumination.

4.4 Color Temperature Switching

When the light is on, press and hold both the Mode Button () and Power Button () simultaneously to cycle through the three color temperatures: Warm (3000K), Neutral White (4500K), and Cool White (6500K).

4.5 Lockout Modes

The TUP2 features two lockout modes to prevent accidental activation.

• Mod Separa Kunci: When the light is off, press and hold the Power Button () until "SEMI LOCK" appears on the OLED display. In this mode, only direct access to TURBO is available.
• Full Lockout Mode: When the light is off, press and hold both the Mode Button () and Power Button () simultaneously until "FULL LOCK" appears on the OLED display. All buttons are locked.
• Untuk Membuka Kunci: In either lockout mode, press and hold both the Mode Button () and Power Button () simultaneously until the display shows the current battery level.

Image: The Nitecore TUP2's dual-button interface, detailing the Mode and Power buttons, and explaining the Semi Lockout and Full Lockout modes for secure carrying or storage.

4.6 Video Produk Rasmi

5. Mengecas

The Nitecore TUP2 features a built-in rechargeable battery with USB-C fast charging capability.

• Port Pengecasan: The USB-C charging port is located on the side of the flashlight, protected by a rubber cover.
• Proses Pengecasan: Connect the provided USB-C cable to the flashlight and a power source. The OLED display will show the charging status and battery level.
• Masa Pengecasan: Pengecasan penuh mengambil masa kira-kira 1.5 jam.
• Penunjuk Pengecasan: The OLED display provides real-time battery status during charging.

Image: The Nitecore TUP2 being charged via its USB-C port, with an emphasis on the protective cover for water, dust, and impact resistance.

6. Spesifikasi

The following table outlines the technical data for the Nitecore TUP2 flashlight, measured according to ANSI/PLATO FL 1-2019 standards using a built-in 1,300mAh Li-ion battery in a 26°C (79°F) ambient environment.

Note: The stated data is measured using the built-in Li-ion battery (1,300mAh) in accordance with international flashlight testing standards. Data may vary in real-world use due to different environmental conditions.

Image: A table displaying the technical specifications of the Nitecore TUP2, including lumen output, runtime, beam distance, and impact resistance across different lighting modes (Turbo, High, Mid, Low, Ultralow).

6.1 Spesifikasi Tambahan

• Bahan: aluminium
• Jenis Sumber Cahaya: LED
• Sumber Kuasa: Dikuasakan Bateri (termasuk 1 bateri Lithium Ion)
• Dimensi Produk: 1.06"D x 1.18"W x 2.76"H
• Berat Barang: 2.08 auns

7. Penyelenggaraan

To ensure the longevity and optimal performance of your Nitecore TUP2 flashlight, follow these maintenance guidelines:

• Pembersihan: Lap badan lampu suluh dengan kain yang bersih dan lembut. Elakkan penggunaan bahan kimia yang keras atau bahan yang melelas.
• Port Pengecasan: Keep the USB-C charging port clean and free of debris. Ensure the rubber cover is properly sealed when not charging to maintain water resistance.
• Storan: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures. Recharge the battery periodically if not used for extended periods to prevent deep discharge.

8. Penyelesaian masalah

If you encounter any issues with your Nitecore TUP2, please refer to the following common troubleshooting steps:

• Lampu Suluh Tidak Dihidupkan: Check if the flashlight is in lockout mode. Refer to section 4.5 for unlocking instructions. Ensure the battery is charged.
• Tidak dicas: Verify that the USB-C cable is securely connected to both the flashlight and the power source. Try a different USB-C cable or power adapter.
• Reduced Light Output: This may indicate a low battery. Recharge the flashlight. If the issue persists after a full charge, contact customer support.
• Paparan OLED Tidak Berfungsi: Ensure the flashlight is charged. If the display remains unresponsive, contact customer support.

9. Waranti dan Sokongan

The Nitecore TUP2 comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package.

For further assistance, technical support, or to explore other Nitecore products, please visit the official Nitecore store:

Visit the Nitecore Store