1. Produk Lebihview
This manual provides comprehensive instructions for the installation, operation, and maintenance of the maXpeedingrods Air Suspension Kit, Model EU95TH. This kit is designed to enhance vehicle stability and load-carrying capacity.
Keserasian:
- Nissan Interstar X70 (Front-wheel drive) 1999–2010
- Opel Movano X70 (Single tires) 1999–2010
- Renault Master X70 (Front-wheel drive) 1998-2010
Please verify compatibility with your vehicle before proceeding with installation.
2. Kandungan Pakej
The maXpeedingrods Air Suspension Kit includes the following components:
- 2 x Air Springs
- 4 x Pendakap Pemasangan
- 1 x 10m Air Hose
- Fastening Screws and Air Fittings
Figure 2.1: Complete Air Suspension Kit Components
Figure 2.2: Fastening Hardware and Air Fittings
3. Ciri-ciri Utama
- Pelarasan Fleksibel: The air springs offer a stroke of 140 mm, with a maximum extension of 230 mm and a minimum compression of 90 mm. This allows for restoring the vehicle's original ride height, minimizing tire wear, and balancing ride comfort with functionality.
- Kapasiti Beban Tinggi: Designed for dual mounting on the rear left and right sides, providing a maximum load capacity of 4,000 kg. The reinforced four-layer structure combined with high-quality steel ensures high load-bearing capability and stable driving.
- Ketahanan dan Kebolehpercayaan: Tested over 5 million times, achieving a burst pressure of ≥ 2.0 MPa. Features high pressure resistance and low noise operation. Made from high-quality natural rubber with a Dacromet anti-corrosion coating for stable performance in temperatures from -40 °C to 70 °C, ensuring a long service life.
Figure 3.1: Air Spring Detail
Figure 3.2: Air Spring Flexibility
Video 3.1: Introduction to maXpeedingrods Air Suspension Leveling Kits. This video provides an overview of the benefits and manufacturing quality of the air spring kits.
4. Arahan Pemasangan
Notis Keselamatan Penting: All modifications must be installed by qualified personnel and in compliance with your local modification regulations. Improper installation can lead to vehicle damage or personal injury.
The kit is designed for quick and efficient screw-on installation, eliminating the need for additional accessories. Follow these general steps:
- Sediakan Kenderaan: Park the vehicle on a level surface, engage the parking brake, and block the wheels. Lift the rear of the vehicle using a suitable jack and support it with jack stands.
- Remove Existing Components (if necessary): Depending on your vehicle's current setup, you may need to remove existing bump stops or other components to make space for the air springs.
- Pasang Kurungan: Attach the mounting brackets to the vehicle's chassis and axle using the provided fastening screws. Ensure all bolts are tightened to the manufacturer's specifications.
- Install Air Springs: Position the air springs between the upper and lower mounting brackets. Secure them using the provided hardware.
- Sambungkan Talian Udara: Cut the 10m air hose to the required lengths. Connect one end of the air hose to the air fitting on each air spring and the other end to the air fittings at your desired inflation point (e.g., bumper, chassis). Ensure all connections are secure and leak-free.
- Ujian untuk Kebocoran: Inflate the air springs to a low pressure (e.g., 10-20 PSI) and check all connections for air leaks using a soapy water solution. Bubbles indicate a leak.
- Pemeriksaan Akhir: Lower the vehicle, remove jack stands, and re-check all fasteners. Adjust air pressure as needed.
Figure 4.1: Air Spring Installation Overview
5. Arahan Operasi
The air suspension kit allows for adjustable load support. Proper air pressure is crucial for optimal performance and safety.
- Inflasi: Use an air compressor to inflate the air springs. Refer to your vehicle's and the air spring kit's specifications for recommended minimum and maximum air pressures. Do not exceed the maximum pressure.
- Pelarasan Beban:
- For heavy loads or towing, increase air pressure to maintain a level vehicle stance and improve stability.
- For lighter loads or unladen driving, reduce air pressure to improve ride comfort.
- Pemantauan: Regularly check the air pressure in the springs, especially before and during long trips or when carrying varying loads.
- Keadaan Memandu: Adjust air pressure according to road conditions and load. Higher pressure may be beneficial for rough terrain or heavy loads, while lower pressure is suitable for smooth roads.
6. Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your air suspension kit.
- Inspect Air Springs: Periodically inspect the air springs for any signs of wear, cracks, punctures, or damage. Check for proper seating and alignment.
- Check Air Lines and Fittings: Examine air lines for kinks, abrasions, or leaks. Ensure all air fittings are tight and free from corrosion.
- Komponen Bersih: Keep the air springs and surrounding components clean from dirt, debris, and road salt, which can accelerate wear.
- Pressure Checks: Maintain recommended air pressure levels. Avoid operating the air springs completely deflated or over-inflated for extended periods.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Air spring not holding pressure | Leak in air line, fitting, or air spring itself. | Check all connections with soapy water for bubbles. Tighten fittings or replace damaged components. Inspect air spring for punctures. |
| Uneven vehicle height | Unequal air pressure in springs, uneven load distribution. | Check and adjust air pressure in each spring individually. Redistribute load if possible. |
| Excessive vibration or harsh ride | Over-inflation, improper installation, worn vehicle suspension components. | Reduce air pressure to recommended levels. Re-check installation. Inspect other suspension components. |
If you encounter issues not listed here or require further assistance, please contact maXpeedingrods customer support.
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | EU95TH |
| Kedudukan Melekap | Rear Left and Right |
| Kapasiti Beban Maksimum | 4000 kg |
| Ketinggian Keseluruhan | 172 mm |
| Strok | 140 mm |
| Max. Extended Length | 230 mm |
| Min. Closed Length | 90 mm |
| Julat Suhu Operasi | -40 °C hingga 70 °C |
| Dimensi Produk | 42.3 x 34.4 x 26.8 cm |
| Berat Barang | 12.5 Kilogram |
9. Waranti dan Sokongan
maXpeedingrods products are manufactured to high-quality standards and are backed by a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official maXpeedingrods webtapak untuk terma dan syarat jaminan terperinci.
For technical support, replacement parts, or any inquiries regarding your air suspension kit, please contact maXpeedingrods customer service through their official channels.
