TaoHFE CT-VB003PK

TaoHFE Pink Kids Vanity Table and Chair Set Instruction Manual

Model: CT-VB003PK

1. Pengenalan

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your TaoHFE Pink Kids Vanity Table and Chair Set, Model CT-VB003PK. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

2. Maklumat Keselamatan

  • Jauhkan semua bahagian kecil dan bahan pembungkus daripada kanak-kanak semasa pemasangan untuk mengelakkan bahaya tercekik.
  • Pastikan semua skru dan pengikat diketatkan dengan selamat sebelum digunakan. Periksa dan ketatkan semula secara berkala jika perlu.
  • Do not allow children to climb on the vanity table or chair.
  • Place the vanity set on a flat, stable surface to prevent tipping.
  • The LED mirror requires batteries (not included). Ensure correct battery polarity and dispose of used batteries responsibly.
  • Elakkan daripada mendedahkan produk kepada kelembapan berlebihan atau cahaya matahari langsung.

3. Kandungan Pakej

Sahkan bahawa semua komponen yang disenaraikan di bawah ada sebelum memulakan pemasangan. Jika mana-mana bahagian hilang atau rosak, sila hubungi khidmat pelanggan.

  • Vanity Table Top with Mirror
  • Table Legs (4)
  • Drawer with Crystal Handle
  • Side Cabinet with Door
  • Sandaran Kerusi
  • Kerusi Kerusi
  • Chair Legs (4)
  • Perkakasan Pemasangan (skru, dowel, dll.)
  • Manual Arahan
TaoHFE Pink Kids Vanity Table and Chair Set

Gambar 3.1: Lebihview of the TaoHFE Pink Kids Vanity Table and Chair Set.

4. Persediaan dan Pemasangan

Assembly typically requires a Phillips head screwdriver (not included). Follow the steps carefully.

4.1. Assemble the Vanity Table

  1. Attach the four table legs to the main table body using the provided screws. Ensure they are securely fastened.
  2. Slide the drawer into its designated slot. Attach the crystal handle to the drawer front.
  3. Attach the side cabinet door to the cabinet frame using the provided hinges.
  4. Carefully place the vanity top with the mirror onto the assembled base, aligning it with the pre-drilled holes. Secure it with screws.
Close-up of LED lighting, crystal handle, and display glass

Figure 4.1: Detail of the LED mirror, crystal handle, and display glass.

4.2. Assemble the Chair

  1. Attach the four chair legs to the chair seat using the provided screws.
  2. Secure the chair backrest to the chair seat and legs.

4.3. Install LED Mirror Batteries

  1. Locate the battery compartment behind the mirror.
  2. Insert the required batteries (type and quantity specified on the compartment cover) ensuring correct polarity.
  3. Tutup penutup petak bateri dengan selamat.
View of the LED light wiring and battery compartment behind the mirror.

Rajah 4.2: Belakang view showing LED light wiring and battery compartment.

5. Arahan Operasi

5.1. Using the LED Mirror Light

To activate the LED light, press the power button located on the vanity surface near the mirror. Press again to turn off the light. The light provides natural, warm illumination.

Close-up of the LED light power button located on the vanity surface.

Figure 5.1: Location of the LED light power button.

5.2. Menggunakan Storan

The vanity table includes a main drawer with six partitioned compartments for organizing small items such as jewelry, hair accessories, or small toys. A side cabinet with a door offers additional enclosed storage space.

Open drawer revealing six partitioned storage compartments for accessories.

Figure 5.2: Open drawer showing partitioned storage.

Vanity set showing the side cabinet with a door for additional storage.

Figure 5.3: Vanity with side cabinet for storage.

6. Penyelenggaraan

6.1. Pembersihan

  • Lap permukaan dengan lembut, damp kain. Elakkan pembersih yang melelas atau bahan kimia yang keras.
  • Untuk cermin, gunakan pembersih kaca dan kain bebas bulu.
  • Ensure the vanity is dry after cleaning to prevent water damage.

6.2. Penjagaan Am

  • Periksa semua skru dan sambungan secara berkala untuk memastikan ia kekal ketat.
  • Avoid placing hot items directly on the vanity surface.
  • Keep the vanity away from direct heat sources or prolonged exposure to sunlight to prevent material degradation.

7. Penyelesaian masalah

  • Lampu LED Tidak Berfungsi:
    Check if batteries are correctly installed and not depleted. Replace batteries if necessary. Ensure the power button is pressed firmly.
  • Melekat Laci:
    Ensure the drawer is properly aligned on its runners. Check for any obstructions within the drawer or its compartment.
  • Vanity or Chair Wobbles:
    Verify that all assembly screws are securely tightened. Ensure the product is placed on a level surface.

8. Spesifikasi

CiriPerincian
JenamaTaoHFE
Nombor ModelCT-VB003PK
warnaMerah jambu
bahanKayu Kejuruteraan
Dimensi Produk16.6 x 31.5 x 40.5 inches (Vanity)
Berat Barang40 paun
Perhimpunan Diperlukanya
Jenis CerminCermin Lampu LED
PenyimpananDrawer with 6 compartments, Side Cabinet
Detailed dimensions of the vanity table and chair.

Rajah 8.1: Gambarajah dimensi produk.

9. Maklumat Waranti

For specific warranty details regarding your TaoHFE Pink Kids Vanity Table and Chair Set, please refer to the warranty card included with your purchase or contact TaoHFE customer support directly. Warranty terms and conditions may vary.

10. Sokongan Pelanggan

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact TaoHFE customer support. Refer to the contact information provided on the product packaging or the official TaoHFE webtapak.

Dokumen Berkaitan - CT-VB003PK

Praview Panduan Pengguna Jam Tangan Pintar Kanak-kanak
Panduan pengguna yang komprehensif untuk Jam Tangan Pintar Kanak-kanak, meliputi keselamatan, operasi, ciri dan penyelesaian masalah.
Praview Odot Automation C Series Remote IO User Manual
This user manual provides comprehensive details on the Odot Automation C Series Remote IO system, covering module features, installation, wiring, technical parameters, and configuration for various network adapters and extended IO modules.
Praview CAEN ELS PS1215 Low-Noise Power Supply User Manual
User manual for the CAEN ELS PS1215, a single-output, dual-voltage, low-noise AC/DC power supply designed for high-efficiency operation and DCCT measurement systems. Includes technical specifications, safety guidelines, I/O details, and ordering information.
Praview CITIZEN Windows Driver Installation Guide for Ver3.6xx
This comprehensive guide provides step-by-step instructions for installing CITIZEN printer drivers (Ver3.6xx) on Windows operating systems. It covers essential preparation, the installation process, port selection for various interfaces, and uninstallation.
Praview CITIZEN OPOS Driver 1.14: Application Development Guide
Explore the CITIZEN OPOS Driver 1.14 Application Development Guide. This technical manual provides developers with essential information on integrating CITIZEN POS printers, cash drawers, line displays, and barcode scanners with Windows applications using the OPOS standard. It covers supported models, operating environments, registry settings, and development precautions.
Praview CITIZEN OPOS DRIVER 1.14 セットアップガイド:インストールと設定方法
CITIZEN OPOS DRIVER 1.14 セットアップガイドは、POSシステム用ドライバーのインストール、設定、および対応ハードウェアに関する詳細情報を提供します。