pengenalan
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Vonesse Big and Tall Office Chair (Model: B0FPM6B5CH). Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.
Image: The Vonesse Big and Tall Office Chair, featuring a gray linen fabric, adjustable armrests, and a footrest, positioned in a contemporary office environment.
Maklumat Keselamatan
- Pastikan semua bahagian ada dan tidak rosak sebelum dipasang. Jangan gunakan jika ada bahagian yang hilang atau patah.
- Pasang kerusi pada permukaan yang lembut dan bersih untuk mengelakkan calar.
- Ketatkan semua skru dengan kuat, tetapi jangan terlalu ketatkan. Periksa dan ketatkan semula semua pengikat secara berkala.
- Jangan berdiri di atas kerusi.
- Do not use the chair for purposes other than its intended use as an office/gaming chair.
- Jauhkan kanak-kanak dari kawasan perhimpunan. Bahagian kecil mungkin bahaya tercekik.
- The maximum weight capacity for this chair is 250 lbs (113 kg).
Senarai Bahagian
Before beginning assembly, verify that all components listed below are present in your package. Refer to the assembly diagram for visual identification of parts.
Imej: Meletup view diagram illustrating all individual parts required for assembling the Vonesse office chair, including the base, casters, gas lift, seat, backrest, armrests, footrest, and various hardware components.
- Backrest
- Kusyen Tempat Duduk
- Armrests (Left & Right)
- Chair Base (Star Base)
- Kastor (Roda)
- Silinder Angkat Gas
- Penutup Lif Gas
- Plat Mekanisme
- Perhimpunan Pijakan Kaki
- Lumbar Pillow (if included)
- Pek Perkakasan (skru, pencuci, sepana Allen)
Persediaan (Arahan Pemasangan)
Follow these steps carefully to assemble your Vonesse office chair:
- Pasang Kastor ke Pangkalan: Insert each caster into the holes at the end of the chair base legs. Push firmly until they click into place.
- Masukkan Pengangkat Gas: Place the gas lift cylinder into the center hole of the assembled chair base. Cover it with the gas lift cover.
- Pasangkan Plat Mekanisme: Pasangkan plat mekanisme pada bahagian bawah kusyen tempat duduk menggunakan skru yang disediakan. Pastikan bahagian hadapan mekanisme menghadap bahagian hadapan tempat duduk.
- Pasang tempat letak tangan: Fasten the armrests to the sides of the seat cushion using the designated screws. Do not fully tighten yet.
- Pasang Sandaran Belakang: Connect the backrest to the seat cushion and armrests using the remaining screws. Once all screws are in place, tighten all armrest and backrest screws securely.
- Pasang Pijakan Kaki: Slide the footrest assembly into the designated slots on the underside of the seat mechanism.
- Sambungkan Tempat Duduk ke Pangkalan: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the tapered end of the gas lift fits into the mechanism plate.
Once assembled, sit on the chair to ensure all components are properly seated and stable.
Arahan Operasi
Your Vonesse office chair offers several adjustable features for personalized comfort:
Pelarasan Ketinggian Tempat Duduk
To adjust the seat height, locate the lever on the right side beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. Release the lever at your desired height.
Backrest Reclining Function
The backrest can recline from 90° to 145°. Pull the lever on the left side beneath the seat to unlock the recline. Lean back to your desired angle and release the lever to lock it in place. To return to an upright position, lean forward slightly while pulling the lever.
Image: A visual representation of the chair's backrest reclining from an upright 90-degree position to a relaxed 145-degree angle, highlighting the adjustment mechanism.
Lengan Tangan Boleh Laras
The armrests are height-adjustable by approximately 3.2 inches. Locate the button or lever on the side of each armrest. Press it and move the armrest up or down to your preferred height. Release the button/lever to lock.
Imej: A terperinci view of the chair's padded armrest, showing the mechanism for vertical height adjustment with arrows indicating upward and downward movement.
Pijakan Kaki Boleh Tarik
To use the footrest, pull it out from beneath the seat. Extend it to your desired length. To retract, push it back under the seat until it is fully stored.
Pusing 360 Darjah
Kerusi ini direka bentuk untuk berpusing 360 darjah bagi memudahkan pergerakan dan akses ke ruang kerja anda.
Penyelenggaraan
Regular maintenance helps prolong the life and appearance of your Vonesse office chair:
- Fabrik Pembersihan: For the linen fabric, spot clean with a mild detergent and a damp cloth. Avoid harsh chemicals or abrasive cleaners. Allow to air dry completely.
- Pemeriksaan perkakasan: Periodically check all screws and bolts to ensure they are tight. Retighten as necessary to maintain stability.
- Penjagaan Kastor: Clean casters regularly to remove dust, hair, and debris that can impede smooth movement.
- Lif Gas: The gas lift is a sealed unit and requires no maintenance. If it malfunctions, contact customer support.
Menyelesaikan masalah
Jika anda menghadapi sebarang masalah dengan kerusi anda, rujuk kepada masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Kerusi tidak stabil atau goyah. | Skru longgar atau pemasangan yang tidak betul. | Check and tighten all assembly screws. Ensure the gas lift is fully seated in the base and mechanism. |
| Seat height adjustment not working. | Kepincangan fungsi lif gas atau tuil tidak disambungkan. | Pastikan tuil ditarik sepenuhnya. Jika masalah berterusan, lif gas mungkin perlu diganti. Hubungi khidmat pelanggan. |
| Sandaran tidak boleh dilaraskan atau dikunci. | Mekanisme baring tersekat atau tuil tidak terpasang. | Check for obstructions. Ensure the recline lever is fully operated. |
| Roda tidak bergolek dengan lancar. | Serpihan terperangkap dalam kastor. | Keluarkan sebarang rambut, habuk atau serpihan dari roda kastor. |
Spesifikasi
Detailed specifications for the Vonesse Big and Tall Office Chair:
Image: A diagram illustrating the key dimensions of the Vonesse office chair, including height, width, and depth, along with recommended user height (5-6.2 FT) and maximum load capacity (250 LBS).
- Jenama: Vonesse
- model: B0FPM6B5CH
- Gaya Belakang: Kembali Berterusan
- gaya: moden
- Julat Umur: Dewasa
- Komponen yang Disertakan: Arm Pad, Cushion
- bentuk: segi empat tepat
- Penggunaan Dalaman/Luar: Dalaman
- Gaya Kaki: Kaki Tirus
- Kedudukan Baring: 2 (adjustable between 90° and 145°)
- Dimensi Produk (L x W x H): 19.7 x 25.6 x 48 inci
- Tarikh Mula-mula Tersedia: 6 September 2025
- Bahan Bingkai: kayu
- Jenis Bahan Tempat Duduk: Linen
- Kapasiti Beban Maksimum: 250 paun
- Ketinggian Pengguna yang Disyorkan: 5 - 6.2 kaki
Waranti dan Sokongan
For warranty information or technical support, please contact Vonesse customer service. Details can typically be found on the product packaging or the official Vonesse webtapak.
Anda juga boleh melawat Vonesse Store on Amazon untuk maklumat lanjut tentang produk dan pilihan hubungan.
