Manual Pengguna PSU Modular Penuh ANTEC GSK850 V2 ATX3.1 850W

1. Pengenalan

Thank you for choosing the Antec GSK850 V2 ATX3.1 850W Full Modular Power Supply Unit. This PSU is designed to provide stable and efficient power to your personal computer, meeting the latest ATX3.1 and PCIe 5.1 standards. It features 80 PLUS Gold certification for high energy efficiency, a PhaseWave Design (LLC + DC-DC) for stable output, and a Zero RPM Manager for quiet operation. The high-quality braided cables ensure durability and a clean build.

Figure 1.1: Antec GSK850 V2 850W Full Modular Power Supply Unit.

2. Maklumat Keselamatan

Please read and understand all safety instructions before installing or operating this power supply unit. Failure to do so may result in personal injury or damage to the product and other components.

• Bahaya Elektrik: Jangan buka PSU casing. vol tinggitagterdapat di dalam, walaupun unit dicabut daripada plag. Tiada bahagian yang boleh diservis pengguna di dalamnya.
• Pengudaraan: Pastikan aliran udara mencukupi di sekeliling PSU. Jangan sekat bukaan pengudaraan.
• Persekitaran: Operate the PSU in a dry, well-ventilated environment. Avoid extreme temperatures, humidity, and dust.
• Sumber Kuasa: Connect the PSU only to a grounded power outlet with the correct voltage and frequency as specified on the unit's label.
• Kabel: Use only the modular cables provided with the PSU. Using third-party cables may cause damage.
• Pemasangan: Pastikan semua kabel disambungkan dengan kukuh sebelum menghidupkan sistem.
• CircuitShield Protection: This PSU includes comprehensive industrial-grade protection (OCP, OVP, UVP, SCP, OPP, OTP, SIP, NLO) to safeguard your system. However, these protections are not a substitute for proper installation and handling.

3. Kandungan Pakej

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your retailer or Antec support.

• Antec GSK850 V2 850W Full Modular Power Supply Unit
• Modular Cable Set (including 12V-2x6 GPU cable for PCIe 5.1)
• Kord Kuasa AC
• Skru Pemasangan
• Manual Pengguna (dokumen ini)

4. Persediaan dan Pemasangan

Follow these steps to properly install your Antec GSK850 V2 PSU into your computer system.

4.1. Persediaan

1. Pastikan komputer anda dimatikan sepenuhnya dan dicabut dari soket dinding.
2. Open your computer case to access the PSU mounting area.
3. If replacing an existing PSU, carefully disconnect all cables from the old unit and remove it.

4.2. Pemasangan PSU

1. Position the Antec GSK850 V2 PSU into the designated PSU bay in your computer case. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards if there's a bottom vent, or upwards if not).
2. Pasangkan PSU pada bekas menggunakan skru pelekap yang disediakan.
3. Due to its compact size, this PSU is designed to fit a wide range of computer cases.
   

   Figure 4.1: Compact size for broad compatibility and full modular cable management.

4.3. Sambungan Kabel

The GSK850 V2 is a full modular PSU, allowing you to connect only the cables necessary for your system, which improves airflow and cable management.

1. Connect the required modular cables to the corresponding ports on the PSU. Refer to the diagram below for cable types and connectors.
2. Connect the other end of each cable to the appropriate component (motherboard, CPU, GPU, SATA devices, etc.).
3. Ensure the 12V-2x6 GPU cable is used for PCIe 5.1 compatible graphics cards. This PSU is ATX3.1 and PCIe 5.1 compatible.
   

   Figure 4.2: ATX 3.1 and PCIe 5.1 compatibility with dedicated 12V-2x6 GPU cable.
4. The high-quality braided cables offer enhanced durability and a cleaner aesthetic.
   

   Figure 4.3: Illustration of the high-quality braided cables.

5. Refer to the table and image below for a detailed overview of the included cables and connectors:
   

   Rajah 4.4: Terperinci view of included cables and connectors.

   Table 4.1: Cable and Connector Specifications

   Kuantiti	Jenis Kabel	Panjang Kabel	Penyambung Setiap Kabel
   1	24(20+4)pin M/B	500mm	1
   1	16(12+4)pin PCIe 5.1 12V-2x6 (600W)	500mm	1
   2	8(4+4)pin CPU	750mm	1
   2	8(6+2)pin PCI-E	600mm + 150mm	2
   2	SATA	450mm + 150mm + 150mm + 150mm	4
   1	Molex	450mm + 150mm + 150mm + 150mm	4

6. Organize cables neatly within your case for optimal airflow and aesthetics.

4.4. Langkah Akhir

1. Tutup casing komputer anda.
2. Connect the AC power cord to the PSU and then to a grounded wall outlet.
3. Flip the power switch on the PSU to the "ON" position.
4. Hidupkan komputer anda.

5. Arahan Operasi

The Antec GSK850 V2 PSU is designed for efficient and quiet operation.

5.1. Zero RPM Manager

This PSU features a Zero RPM fan mode. In this mode, the 120mm silent fan remains off under low to moderate loads, ensuring silent operation. The thermal sensors activate the fan only when necessary, typically under higher power loads, to maintain optimal cooling and extend the PSU's lifespan.

Figure 5.1: Zero RPM Manager fan curve and 120mm silent fan illustration.

5.2. Hidupkan/Mati Kuasa

• To power on your system, ensure the PSU's main power switch is in the "ON" position, then press your computer's power button.
• To power off your system, shut down your operating system normally. For complete power disconnection, flip the PSU's main power switch to the "OFF" position and unplug the AC power cord.

6. Penyelenggaraan

Proper maintenance can extend the lifespan of your PSU and ensure optimal performance.

• Pembersihan: Periodically clean the exterior of the PSU and the fan intake/exhaust vents using compressed air to remove dust buildup. Ensure the PSU is powered off and unplugged before cleaning.
• Pengurusan Kabel: Periksa dengan kerap bahawa semua kabel modular disambungkan dengan selamat dan tidak menghalang aliran udara dalam kes itu.
• Persekitaran: Kekalkan persekitaran yang bersih, kering dan berventilasi baik untuk sistem komputer anda.

7. Penyelesaian masalah

If you encounter issues with your Antec GSK850 V2 PSU, refer to the following common troubleshooting steps.

7.1. Tiada Kuasa / Sistem Tidak Berfungsi

• Semak Sambungan Kuasa: Ensure the AC power cord is securely plugged into both the PSU and the wall outlet. Verify the PSU's main power switch is in the "ON" position.
• Sambungan Dalaman: Confirm that the 24-pin motherboard cable, 8-pin CPU cable, and all other necessary modular cables are firmly connected to both the PSU and the respective components.
• Saluran Keluar Dinding: Test the wall outlet with another device to ensure it is providing power.
• Power Button/Front Panel: Ensure your case's front panel connectors (especially the power switch) are correctly connected to the motherboard.

7.2. System Instability / Random Shutdowns

• Lebihan beban: Pastikan keperluan kuasa sistem anda tidak melebihi kapasiti 850W PSU.
• Terlalu panas: Check for proper ventilation within your PC case. Ensure the PSU fan is not obstructed and is operating when under load.
• Sambungan longgar: Re-seat all power cables to ensure they are making proper contact.
• Component Issues: Instability can also be caused by other components (RAM, GPU, CPU). If the PSU seems fine, test other components.

7.3. Fan Noise

• Mod RPM sifar: The fan may not spin under low loads. This is normal operation for the Zero RPM Manager.
• Pengumpulan habuk: Clean the fan and vents as described in the Maintenance section.
• Halangan: Ensure no cables or foreign objects are interfering with the fan blades.

If these steps do not resolve your issue, please contact Antec customer support.

8. Spesifikasi

Detailed technical specifications for the Antec GSK850 V2 PSU.

9. Waranti dan Sokongan

Antec stands behind the quality of its products.

9.1. Maklumat Waranti

The Antec GSK850 V2 PSU comes with a Waranti 10 Tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please visit the official Antec webtapak.

9.2. Sokongan Pelanggan

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact Antec customer support through their official channels.

You can find more information and support resources by visiting the Antec Store: Antec Official Store