pengenalan
Thank you for choosing the Baseus EH10 Adaptive Active Noise Cancelling Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.
Apa yang ada dalam Kotak
The Baseus EH10 package includes the following items:
- Baseus EH10 NC Headphones
- Kabel Data USB-C
- Manual Pengguna
Image: Contents of the Baseus EH10 headphone box.
Produk Selesaiview
Familiarize yourself with the physical components and controls of your Baseus EH10 headphones.
Komponen Fon Kepala
Imej: Keseluruhan view of the Baseus EH10 headphones.
Kawalan dan Pelabuhan
The headphones feature intuitive buttons and ports for easy operation:
- Butang Kuasa: For turning the headphones on/off, playing/pausing music, and managing calls.
- Butang Kelantangan / Turun Kelantangan: To adjust audio volume.
- Butang ANC: To cycle through Active Noise Cancellation modes.
- Port USB-C: Untuk mengecas fon kepala.
- Bicu Audio 3.5mm: Untuk sambungan audio berwayar.
Imej: Terperinci view kawalan fon kepala.
Persediaan
Hidupkan/Mati Kuasa
- Hidupkan kuasa: Press and hold the power button for 2 seconds until the indicator light shows a solid blue light for 1 second.
- Matikan: Press and hold the power button for 4 seconds until the indicator light flashes red once and turns off.
Berpasangan Bluetooth
To connect your Baseus EH10 headphones to a device:
- Pastikan fon kepala dimatikan.
- Press and hold the power button for 4 seconds to enter pairing mode. The indicator light will flash red and blue alternately.
- Pada peranti anda (telefon pintar, tablet, komputer), dayakan Bluetooth dan cari peranti yang tersedia.
- Select "Baseus EH10 NC" from the list of devices to connect.
- Once connected, the indicator light will turn solid blue or off, depending on the model.
Video: Demonstrates generic headphone pairing. Note: This video is a general guide and may not feature the exact Baseus EH10 model.
Auto-Sambungan Semula
After the initial pairing, the headphones will automatically reconnect to the last paired device when powered on again, provided the device's Bluetooth is active and within range.
Switching Devices / Forced Pairing
To disconnect from the current device and enter pairing mode for a new device, press and hold both the Volume "+" and Volume "-" buttons for 5 seconds. The indicator light will flash red and blue three times, indicating the headphones have disconnected and re-entered pairing mode.
Arahan Operasi
Kawalan Muzik
- Main/Jeda: Single-click the Power button.
- Lagu Seterusnya: Tekan dan tahan butang Naikkan Kelantangan selama 1 saat.
- Trek Sebelumnya: Press and hold the Volume Down button for 1 second.
- Kelantangan: Single-click the Volume Up button.
- Perlahankan suara: Single-click the Volume Down button.
Kawalan Panggilan
- Jawab/Tamatkan Panggilan: Single-click the Power button.
- Tolak Panggilan: Tekan dan tahan butang Kuasa selama 1 saat.
Mod Pembatalan Bunyi Aktif (ANC)
The Baseus EH10 features adaptive ANC technology. Use the dedicated ANC button to switch between modes:
- ANC Hidupkan: Reduces background noise by up to -45dB.
- Mod Ketelusan: Membolehkan anda mendengar persekitaran anda sambil mendengar audio.
- ANC Dimatikan: Melumpuhkan pembatalan hingar.
Image: Illustration of the -45dB Adaptive ANC feature.
Pembantu Suara
Triple-click the Power button to activate or deactivate your device's voice assistant (e.g., Siri, Google Assistant).
Low-Latency Mode (Gaming/Movie Mode)
Double-click the ANC button to toggle Movie Mode on/off. Double-click the Power button to toggle Game Mode on/off. These modes optimize audio for reduced latency during gaming or video playback.
Video: Demonstrates generic smart button controls for music, calls, and modes. Note: This video is a general guide and may not feature the exact Baseus EH10 model.
Mengecas
The Baseus EH10 headphones offer extended playtime and fast charging capabilities:
- Hayat Bateri: Up to 80 hours with ANC off, and 55 hours with ANC on.
- Pengecasan Cepat: Cas selama 10 minit memberikan masa bermain selama kira-kira 10 jam.
To charge your headphones, connect the provided USB-C cable to the charging port on the headphones and a compatible USB power source.
Image: Baseus EH10 headphones showcasing week-long playtime.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nama Model | EH10 NC |
| Jenama | Baseus |
| warna | Hitam |
| Teknologi Ketersambungan | Wayarles (Bluetooth) |
| Teknologi Komunikasi Tanpa Wayar | Bluetooth |
| Kawalan Bunyi | Pembatalan Bunyi Adaptif |
| Faktor Bentuk Fon Kepala | Atas Telinga |
| Penempatan Telinga | Atas Telinga |
| Impedans | 32 Ohm |
| Kaedah Kawalan | Butang |
| Masa Mengecas | 10 minutes (for 10 hours playtime) |
| Kegunaan Khusus Untuk Produk | Travel, Work, Daily Life |
| Peranti Serasi | Phones, Tablets, Desktop Computers, Laptops, Mobile Phones, Smart Speakers |
| Dimensi Item | 29 x 22 x 6 cm; 410 gram |
| Negara Asal | China |
Penyelenggaraan
To ensure the longevity and optimal performance of your Baseus EH10 headphones, follow these maintenance guidelines:
- Pembersihan: Gunakan kain lembut dan kering untuk membersihkan fon kepala. Elakkan menggunakan bahan kimia yang keras atau bahan yang melelas.
- Storan: Simpan fon kepala di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
- Elakkan Kelembapan: Jangan dedahkan fon kepala kepada air atau kelembapan berlebihan.
- Tangani dengan Berhati-hati: Elakkan daripada menjatuhkan atau meletakkan fon kepala kepada kesan yang kuat.
Image: Baseus EH10 headphones designed for cloud-like comfort.
Menyelesaikan masalah
If you encounter any issues with your Baseus EH10 headphones, refer to the following common solutions:
- Tiada Kuasa: Pastikan fon kepala dicas sepenuhnya.
- Tidak boleh berpasangan: Make sure the headphones are in pairing mode (indicator light flashing red and blue). Turn off and on your device's Bluetooth. Try clearing previous pairings on your device.
- Tiada Bunyi: Check the volume levels on both the headphones and your connected device. Ensure the headphones are properly connected via Bluetooth or the 3.5mm audio cable.
- Kualiti Bunyi Lemah: Ensure there are no obstructions between the headphones and your device. Move closer to your device to avoid interference. Check if the audio source quality is high.
- ANC Tidak Berfungsi: Ensure the ANC mode is activated.
Tetapan Semula Kilang
If issues persist, you can perform a factory reset:
- Press and hold both the Volume "+" and Volume "-" buttons for 10 seconds.
- The LED indicator will blink 3 times once the reset is complete.
Waranti dan Sokongan
Untuk maklumat jaminan dan sokongan pelanggan, sila rujuk kad jaminan yang disertakan dalam pembungkusan produk anda atau lawati laman web rasmi Baseus. webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
