Manual Pengguna Pemangkas Termal DAEWOO DCS2512

1. Pengenalan

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your DAEWOO DCS2512 Thermal Pruner. The DCS2512 is a gasoline-powered chainsaw designed for pruning branches, cutting small trees, and preparing firewood. It features a 25.4 cm³ (2-stroke) engine, a 30 cm (12-inch) guide bar, and incorporates user-friendly features such as an anti-vibration system, automatic chain lubrication, and easy starting.

Please read this manual thoroughly before operating the pruner to ensure proper use and to prevent injury or damage to the equipment.

Imej 1.1: The DAEWOO DCS2512 Thermal Pruner, showcasing reka bentuknya yang padat dan bar panduan 30cm.

2. Arahan Keselamatan

Operating a thermal pruner can be dangerous if proper safety precautions are not followed. Always prioritize safety to prevent serious injury.

2.1 Peralatan Pelindung Diri (PPE)

• Perlindungan Kepala: Pakai topi keledar keselamatan.
• Perlindungan Mata: Always wear safety glasses or goggles. The product includes safety glasses.
• Pelindung Telinga: Use ear defenders to protect against noise.
• Perlindungan Tangan: Wear heavy-duty work gloves. The product includes gloves.
• Perlindungan Kaki: Wear chainsaw protective trousers or chaps.
• Perlindungan Kaki: Pakai but keselamatan dengan penutup kaki keluli dan tapak kaki tidak licin.

2.2 Garis Panduan Keselamatan Am

• Baca Manual: Fahami semua arahan dan amaran sebelum digunakan.
• Area Safety: Pastikan kawasan kerja bebas daripada orang ramai, kanak-kanak dan haiwan peliharaan. Kekalkan jarak yang selamat.
• Keadaan Cuaca: Do not operate in adverse weather conditions such as strong winds, rain, or snow.
• Pengendalian Bahan Api: Mix and refuel outdoors in a well-ventilated area. Do not smoke while handling fuel. Wipe up any spills immediately.
• Pemeriksaan: Before each use, inspect the pruner for loose parts, damage, or wear. Ensure the chain brake is functional.
• Cengkaman Teguh: Always hold the pruner firmly with both hands.
• Pencegahan Sogokan: Berhati-hati dengan risiko sogokan. Elakkan memotong dengan hujung bar panduan.
• Kestabilan: Pastikan tapak dan keseimbangan yang stabil sebelum dan semasa operasi pemotongan.
• Pengangkutan: Always engage the chain brake and use the blade protection cover when transporting the pruner.

3. Komponen dan Ciri

The DAEWOO DCS2512 Thermal Pruner comes with several components designed for efficient and safe operation.

3.1 Komponen yang Disertakan

• Penutup Perlindungan Bilah
• Sarung Tangan Keselamatan
• Cermin Mata Keselamatan
• Botol Campur Bahan Api
• Kit Alat (untuk pemasangan dan penyelenggaraan)
• Bar Panduan
• Rantai Gergaji

Imej 3.1: The DAEWOO DCS2512 Thermal Pruner shown with its complete set of included accessories, including the fuel mixing bottle, tool kit, safety gloves, and safety glasses.

Imej 3.2: Satu lagi view of the DAEWOO DCS2512 Thermal Pruner and its accessories, highlighting the various components provided for user convenience and safety.

3.2 Ciri-ciri Utama

• 25.4 cm³ 2-Stroke Engine: Provides robust power for various cutting tasks.
• 30 cm (12-inch) Guide Bar: Suitable for pruning and cutting small to medium-sized wood.
• Sistem Anti-Getaran: Reduces user fatigue during extended operation.
• Automatic Chain Lubrication: Ensures optimal chain and guide bar lubrication, extending their lifespan and improving cutting performance.
• Sistem Permulaan Mudah: Facilitates quick and effortless engine ignition.
• Brek rantai: A safety mechanism designed to stop the chain rapidly in case of kickback.
• Perlindungan Perlindungan: For safe storage and transport of the guide bar.

Imej 3.3: A terperinci view of the DAEWOO DCS2512 engine housing, showing the starter handle, choke lever, and other operational controls, along with the 0.9 kW power rating.

Imej 3.4: The guide bar of the DAEWOO DCS2512 with its protective cover installed, illustrating safe storage and transport configuration.

4. Persediaan dan Pemasangan

Before operating your DAEWOO DCS2512, proper assembly and fueling are essential.

4.1 Pemasangan Bar Panduan dan Rantaian

1. Ensure the engine is off and the chain brake is disengaged.
2. Remove the chain cover by loosening the nuts.
3. Place the chain around the clutch drum and guide bar, ensuring the cutting edges face forward on the top side of the guide bar.
4. Fit the guide bar onto the studs, aligning the chain tensioner pin with the hole in the guide bar.
5. Replace the chain cover and hand-tighten the nuts.
6. Adjust chain tension using the tensioning screw. The chain should be snug but still able to be pulled freely by hand.
7. Fully tighten the chain cover nuts.

4.2 Fuel and Oil Preparation

The DCS2512 uses a 2-stroke engine, requiring a specific fuel mixture.

• Campuran Bahan Api: Mix unleaded gasoline with high-quality 2-stroke engine oil at the ratio specified in your product documentation (typically 25:1 or 50:1, refer to the mixing bottle for guidance). Use the provided mixing bottle for accuracy.
• Minyak rantai: Fill the chain oil reservoir with suitable chain lubricant. The automatic lubrication system requires a constant supply of chain oil.

Amaran: Never operate the pruner without chain oil, as this will cause rapid wear to the chain and guide bar.

5. Arahan Operasi

Follow these steps for safe and effective operation of your DAEWOO DCS2512.

5.1 Menghidupkan Enjin

1. Place the pruner on a flat, stable surface.
2. Engage the chain brake by pushing the front hand guard forward.
3. Set the choke lever to the "Closed" position (full choke).
4. Tekan mentol primer beberapa kali sehingga bahan api kelihatan.
5. Pull the starter cord firmly and steadily until the engine fires briefly.
6. Move the choke lever to the "Open" position (half choke or run position, depending on model).
7. Tarik kord starter sekali lagi sehingga enjin dihidupkan dan berjalan.
8. Allow the engine to warm up for a few moments, then disengage the chain brake before cutting.

5.2 Teknik Memotong

• Sentiasa mengekalkan cengkaman yang kukuh dengan kedua-dua tangan.
• Ensure stable footing.
• Elakkan memotong dengan hujung bar panduan untuk mengelakkan sogokan.
• When pruning, assess the branch's weight and direction of fall. Make relief cuts to prevent pinching the guide bar.
• Jangan menjangkau atau memotong melebihi paras bahu.

5.3 Menghentikan Enjin

Untuk mematikan enjin, hanya alihkan suis penyalaan ke kedudukan "OFF".

6. Penyelenggaraan

Regular maintenance ensures the longevity and safe operation of your pruner.

6.1 Penyelenggaraan Harian

• Penapis Udara Bersih: Remove and clean the air filter. Replace if damaged.
• Check Chain Tension: Laraskan mengikut keperluan.
• Inspect Chain: Check for sharpness and damage. Sharpen or replace if needed.
• Check Guide Bar: Bersihkan alur bar panduan dan lubang minyak. Balikkan bar panduan secara berkala untuk memastikan haus yang sekata.
• Check Chain Brake: Ensure it engages and disengages properly.
• Unit Bersih: Remove sawdust and debris from the engine housing and cooling fins.

6.2 Penyelenggaraan Berkala

• Palam Pencucuh: Inspect and clean the spark plug. Replace if worn or fouled.
• Penapis Bahan Api: Inspect and replace the fuel filter as needed.
• Pelarasan Karburator: If the engine runs poorly, consult a qualified service technician for carburetor adjustments.

7. Penyelesaian masalah

This section addresses common issues you might encounter with your DAEWOO DCS2512.

If you encounter problems not listed here or if solutions do not resolve the issue, please contact DAEWOO customer support or a qualified service center.

8. Spesifikasi

Technical specifications for the DAEWOO DCS2512 Thermal Pruner.

9. Waranti dan Sokongan

For detailed warranty information, please refer to the warranty card included with your product or visit the official DAEWOO webtapak. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.

For technical support, spare parts, or service inquiries, please contact DAEWOO customer service through their official channels. Contact information can typically be found on the product packaging or the DAEWOO brand webtapak.