KikkaBoo i-Moove 2 i-SIZE Car Seat Instruction Manual

1. Pengenalan

This manual provides essential information for the correct installation, safe operation, and proper maintenance of your KikkaBoo i-Moove 2 i-SIZE car seat. Designed for children from 40 to 150 cm in height, this car seat offers advanced safety features and comfort for various stages of your child's growth. Please read these instructions carefully before using the car seat and keep them for future reference.

This image displays the KikkaBoo i-Moove 2 i-SIZE car seat in black, showcasing its design from various perspectives. It highlights the overall structure, padding, and base with ISOFIX connectors.

2. Maklumat Keselamatan

The KikkaBoo i-Moove 2 i-SIZE car seat is tested and approved according to UN Regulation No. R129/04, ensuring high safety standards for your child.

2.1. Key Safety Features

• i-SIZE Standard: Complies with the latest European safety standard for enhanced protection.
• Side Impact Protection System (SPS): Integrated system designed to absorb forces in the event of a side collision.
• Abah-abah 5 Mata: Securely holds your child in place, adjustable for optimal fit.
• ISOFIX and Top Tether: Provides stable and secure installation in the vehicle.

2.2. Garis Panduan Penggunaan

• Julat Ketinggian: Suitable for children from 40 cm to 150 cm.
• Menghadap Belakang: Mandatory for children from 40 cm up to 105 cm.
• Menghadap ke hadapan: Permitted for children from 76 cm up to 150 cm.
• Always ensure the car seat is correctly installed and the child is properly secured before every journey.

This image confirms the KikkaBoo i-Moove 2 i-SIZE car seat's compliance with safety standards, displaying 'CRASH TEST APPROVED' according to UN Regulation No. R129/04 by ATS San Marino and the ECE R129 Standard logo.

This crucial safety diagram warns against placing a rear-facing child seat in a front passenger seat equipped with an active airbag. It also advises consulting the instruction manual for proper use.

3. Persediaan dan Pemasangan

Proper installation is crucial for your child's safety. Follow these steps carefully.

3.1. Menyediakan Tempat Duduk Kereta

Ensure the car seat is in its upright position and the ISOFIX connectors are retracted before beginning installation.

3.2. ISOFIX and Top Tether Installation

1. Panjangkan Penyambung ISOFIX: Press the release button (usually red or green) on the car seat base and extend the ISOFIX connectors.
2. Attach ISOFIX: Align the connectors with the ISOFIX anchor points in your vehicle's seat. Push firmly until you hear a click and the indicators turn green (if applicable).
3. Push Car Seat Firmly: Push the car seat firmly against the vehicle's backrest to ensure a tight fit.
4. Attach Top Tether: Locate the Top Tether strap at the back of the car seat. Attach the hook to the designated Top Tether anchor point in your vehicle (refer to your vehicle's manual for location).
5. Tighten Top Tether: Pull the strap to remove any slack until the indicator (if present) shows it is correctly tensioned.

This image demonstrates the secure installation method of the car seat, pointing out the ISOFIX connectors at the base and the Top Tether strap for additional stability.

This comprehensive diagram provides visual instructions for installing the i-Size car seat in both rear-facing mode (for children 40-105 cm) and forward-facing mode (for children 76-150 cm), detailing the use of ISOFIX and vehicle belts.

4. Arahan Operasi

The i-Moove 2 offers several adjustable features for your child's comfort and safety.

4.1. 360° Rotation System

To rotate the car seat, locate the rotation release lever (usually at the front of the base). Press the lever and turn the seat to the desired position (rear-facing or forward-facing). This feature simplifies placing and removing your child from the seat.

4.2. Pelarasan Tempat Letak Kepala

The headrest can be adjusted to 24 different levels to accommodate your child's height. To adjust, squeeze the headrest adjustment handle (typically at the top of the headrest) and slide the headrest up or down until it is at the correct height, ensuring the shoulder straps are at or just below your child's shoulders when rear-facing, or at or just above when forward-facing.

4.3. Fungsi Berbaring

The car seat features 5 reclining positions: 1 for rear-facing and 4 for forward-facing. To recline the seat, locate the recline lever (usually at the front or side of the base). Press the lever and adjust the seat to the desired angle. Ensure the seat clicks securely into place.

This image illustrates the car seat's recline functionality, showing the five available positions: four for forward-facing use and one for rearward-facing use, providing flexible comfort.

4.4. Pelarasan Abah-abah

The 5-point harness can be adjusted with one hand. To tighten, pull the adjustment strap located at the front of the seat. To loosen, press the harness release button (usually under a flap) and pull the shoulder straps outwards. Ensure the harness is snug against your child's body without being too tight.

This image illustrates the car seat's safety and comfort features, including the integrated Side Impact Protection System (SPS), the secure 5-point harness, and its capability for both forward and rearward facing positions.

This image details the comfort and safety elements, including the soft full body support cushions, the secure five-point harness, and the 360-degree rotation feature for ease of use.

This image highlights the car seat's adaptability for children from 40 cm up to 150 cm. It also shows the washable cover, the adjustable headrest height, and the extra padding designed for comfort.

This image reinforces the car seat's design to grow with the child, featuring its reclining system and the visible Side Impact Protection (SPS) mechanism.

5. Penyelenggaraan

Regular cleaning and maintenance will prolong the life of your car seat.

• Penutup boleh dibasuh: The fabric cover of the i-Moove 2 car seat is removable and washable. Please refer to the care label on the cover for specific washing instructions (e.g., machine wash cold, gentle cycle, air dry).
• Bahagian plastik: Lap bahagian plastik dengan iklanamp kain dan sabun lembut. Jangan gunakan pembersih atau pelarut yang melelas.
• Sistem abah-abah: Inspect the harness straps regularly for any signs of wear or damage. Clean with a damp cloth; do not machine wash or immerse in water, as this may weaken the material.

6. Penyelesaian masalah

If you encounter any issues with your car seat, refer to the following common solutions.

6.1. Unexplained 'Bip Bip' Sound

Some users have reported an intermittent 'bip bip' sound. This sound is typically an indicator for an unlatched buckle or an incorrectly installed ISOFIX connector. Please check the following:

• Ensure the 5-point harness buckle is fully engaged and clicked into place.
• Verify that both ISOFIX connectors are securely attached and their indicators show green.
• Confirm the Top Tether strap is correctly tensioned.
• If the sound persists after checking all connections, consult the manufacturer's support for further assistance.

7. Spesifikasi

8. Waranti dan Sokongan

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or further inquiries, please reach out to KikkaBoo customer service through their official webtapak atau tempat pembelian anda.