LOFREE Flow2 Low-Profile Manual Pengguna Papan Kekunci Mekanikal

1. Pengenalan

The LOFREE Flow2 is a low-profile mechanical keyboard designed for versatility and durability. It features an aluminum alloy body, Void Linear Switches, and offers three connection modes: wired (USB-C), 2.4GHz wireless, and Bluetooth. This manual provides detailed instructions for setting up, operating, and maintaining your Flow2 keyboard.

2. Persediaan

2.1 Apa yang ada di dalam Kotak

Upon unboxing your LOFREE Flow2 keyboard, you will find the following items:

• LOFREE Flow2 Mechanical Keyboard
• Kabel USB-C 1.5m
• Penerima 2.4GHz
• 4 Replacement Keycaps (for Windows/macOS compatibility)
• Manual Pengguna

Penerangan Imej: A flat lay image displaying all items included in the LOFREE Flow2 keyboard package: the keyboard, a braided USB-C cable, a small 2.4GHz USB receiver, four additional keycaps, and the user guide.

2.2 Ketersambungan

The Flow2 keyboard supports three connection modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth. A dedicated switch on the back of the keyboard allows you to select your preferred mode.

Power Switch and Mode Selection

The power switch is located on the back of the keyboard, concealed behind one of the flip-out feet. Toggle this switch to select between Wired, Bluetooth (BT), or 2.4GHz wireless modes.

Penerangan Imej: A close-up of the back of the LOFREE Flow2 keyboard, illustrating the three-way toggle switch for wired, Bluetooth, and 2.4GHz wireless connections, located near the USB-C port and a foldable kickstand.

Mod Berwayar

1. Ensure the power switch on the back of the keyboard is set to the berwayar kedudukan.
2. Connect the provided USB-C cable to the keyboard's USB-C port and the other end to your computer.
3. Papan kekunci akan dikenali secara automatik oleh sistem anda.

Mod Wayarles 2.4GHz

1. Ensure the power switch on the back of the keyboard is set to the 2.4G kedudukan.
2. Insert the 2.4GHz USB receiver into an available USB port on your computer.
3. Pada papan kekunci, tekan fn+4 untuk mengaktifkan mod 2.4GHz. Papan kekunci sepatutnya bersambung secara automatik.

Mod Bluetooth

1. Ensure the power switch on the back of the keyboard is set to the BT kedudukan.
2. Pada papan kekunci, tekan fn+1, fn+2, atau fn+3 to select a Bluetooth channel. The indicator light will flash, indicating pairing mode.
3. On your device (computer, tablet, phone), navigate to Bluetooth settings and select "LOFREE Flow2" from the list of available devices to pair.

2.3 System Switch (Windows/macOS)

The Flow2 keyboard is compatible with both Windows/Android and macOS/iOS operating systems. You can switch between system layouts using the following key combinations:

• Untuk Windows / Android: Tekan dan tahan Fn + N.
• Untuk macOS / iOS: Tekan dan tahan fn+m.

3. Arahan Operasi

3.1 Side Touch Bar Functions

The LOFREE Flow2 features a side touch bar for quick adjustments to volume and screen brightness, as well as a lock function.

Penerangan Imej: A terperinci view of the keyboard's right side, showcasing the touch-sensitive bar with visual indicators for volume, screen brightness, and a lock feature.

• Kawalan Kelantangan: Swipe your finger up on the touch bar to increase volume, and swipe down to decrease it.
• Kecerahan Skrin: tahan Fn key and swipe your finger up on the touch bar to increase screen brightness, or swipe down to decrease it.
• Fungsi Kunci: To prevent accidental touches, press and hold Fn + Bar ruang for approximately 3 seconds to toggle the touch bar lock.

3.2 Tetapan Lampu Latar

Adjust the keyboard's backlight to suit your preference.

• Tukar Mod Pencahayaan: Tekan Fn + Anak Panah Kiri or Fn + Anak Panah Kanan to cycle through different backlight modes (e.g., Steady On, Breathing, Off).
• Laraskan Kecerahan: Tekan Fn + Anak Panah Atas to increase backlight brightness, and Fn + Anak Panah Bawah untuk mengurangkannya.

4. Keycap and Switch Management

The LOFREE Flow2 keyboard comes with pre-installed Mac keycaps and includes additional Windows keycaps for customization. The switches are hot-swappable, allowing for easy replacement.

Penerangan Imej: The LOFREE Flow2 keyboard with several keycaps removed and placed beside it, illustrating the included Windows and macOS keycap options for system compatibility.

4.1 Swapping Keycaps

To change keycaps, use the included keycap puller:

1. Insert both ends of the keycap puller into the gaps on either side of the keycap you wish to remove.
2. Gently pull straight up until the keycap detaches.
3. For larger keycaps (e.g., Spacebar, Enter, Shift), pull from both sides separately to prevent damage to the stabilizers.
4. Sejajarkan penutup kekunci baharu dengan batang suis dan tekan ke bawah dengan kuat sehingga ia berbunyi klik pada tempatnya.

4.2 Menanggalkan Suis

The Flow2 features hot-swappable switches. To remove a switch, use a switch puller (not included, but typically comes with switch sets):

1. First, remove the keycap as described above.
2. Align the switch puller with the clips on the top and bottom of the switch.
3. Gently squeeze the clips and pull the switch straight upward. Avoid twisting to prevent bending the pins.
4. To install a new switch, align its pins with the holes on the PCB and press down firmly until it clicks into place. Ensure the pins are straight before inserting.

Penerangan Imej: A diagram illustrating the internal components of a Void Linear Switch, including the stem, spring, and housing, alongside a force curve graph detailing its operating and return points.

5. Spesifikasi Produk

6. Penyelesaian masalah

If you encounter issues with your LOFREE Flow2 keyboard, please refer to the following common solutions:

• Papan Kekunci Tidak Membalas:
  • Ensure the power switch on the back is in the correct position for your chosen connection mode (Wired, BT, or 2.4G).
  • Check battery level. Connect the keyboard via USB-C to charge.
  • For 2.4GHz, ensure the USB receiver is securely plugged in and you've pressed fn+4.
  • For Bluetooth, ensure your device's Bluetooth is on, the keyboard is in pairing mode (Fn + 1/2/3), and it's paired correctly in your device's settings.
  • Try restarting your computer and the keyboard.
• Backlight Not Working/Dim:
  • Laraskan kecerahan menggunakan Fn + Anak Panah Atas/Bawah.
  • Change lighting mode using Fn + Anak Panah Kiri/Kanan.
  • Pastikan papan kekunci mempunyai cas bateri yang mencukupi.
• Keys Not Registering Correctly (Windows/macOS):
  • Verify the correct system layout is selected (Fn + N for Windows/Android, fn+m for macOS/iOS).
  • If using QMK/VIA, ensure your custom layout is correctly loaded and active.
• Touch Bar Issues:
  • Ensure the touch bar is not locked. Press and hold Fn + Bar ruang for 3 seconds to toggle the lock.

If these steps do not resolve your issue, please contact LOFREE customer support for further assistance.

7. Waranti dan Sokongan

The LOFREE Flow2 keyboard is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For product support, technical assistance, or warranty claims, please visit the official LOFREE store or contact their customer service directly.

Official LOFREE Store: LOFREE Store on Amazon