Moultrie MFG-15097

Moultrie Pro Hunter III Deer Feeder Kit Instruction Manual

Model: MFG-15097

1. Pengenalan

This manual provides detailed instructions for the setup, operation, and maintenance of your Moultrie Pro Hunter III Deer Feeder Kit. This kit is designed to offer precise and reliable feed distribution with modern control features.

Moultrie Pro Hunter III Deer Feeder Kit

Image 1.1: The Moultrie Pro Hunter III Deer Feeder Kit, a black unit with a spinner plate and control housing.

2. Ciri-ciri Produk

Moultrie Pro Hunter III Feeder Kit features

Image 2.1: Visual representation of key features including 10 daily feed times, 360° feed coverage, Quick-Lock compatibility, and Bluetooth connectivity.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum meneruskan pemasangan:

Nota: A 6V tab-top rechargeable battery and solar panel are not included and must be purchased separately.

4. Persediaan dan Pemasangan

4.1 Pemasangan Bateri

  1. Open the hinged door on the feeder kit to access the battery compartment.
  2. Insert a fully charged 6V tab-top rechargeable battery into the compartment, ensuring correct polarity.
  3. Close the hinged door securely.
Battery installation for Moultrie Pro Hunter III Feeder Kit

Image 4.1: Illustration showing the correct 6V tab-top battery type for installation and comparison with an incompatible safety-top battery.

4.2 Attaching to a Hopper

The Pro Hunter III Feeder Kit is designed for Quick-Lock compatibility with most Moultrie flat-bottom hoppers.

  1. Align the Quick-Lock adapter on the feeder kit with the corresponding slot on your Moultrie hopper.
  2. Twist the feeder kit clockwise until it securely locks into place. No tools are required.
Attaching Moultrie Pro Hunter III Feeder Kit to a hopper

Image 4.2: A hand demonstrating the Quick-Lock installation of the feeder kit onto a hopper.

4.3 Optional Solar Panel Connection

If using an optional Moultrie solar panel, connect its cable to the designated solar panel port on the feeder kit. Ensure the solar panel is positioned to receive maximum sunlight.

5. Arahan Operasi

5.1 Pengaturcaraan Manual

To program feed times directly on the unit:

  1. Open the hinged door to reveal the backlit digital screen and control buttons.
  2. Gunakan SET button to navigate through settings (Time, Feed Times, Run-Time, Motor Speed).
  3. Gunakan UP dan TURUN butang untuk melaraskan nilai.
  4. Program up to 10 daily feed times. Each feed time can be set for a duration of 1 to 60 seconds.
  5. Adjust the motor speed (High, Medium, Low) to control the feed spread.
  6. Tekan UJIAN to manually activate the feeder for a short duration.
Moultrie Pro Hunter III Feeder Kit digital timer display

Imej 5.1: Jarak dekat view of the backlit digital timer screen and control buttons for manual programming.

5.2 Bluetooth Control via Moultrie App

For convenient wireless control, download the Moultrie App on your smartphone.

  1. Pastikan Bluetooth didayakan pada telefon pintar anda.
  2. Open the Moultrie App and follow the on-screen instructions to pair with your Pro Hunter III Feeder Kit.
  3. Once paired, you can adjust feed times, durations, and motor speeds directly from the app.
  4. The app may also provide estimated feed level updates.
Person using Moultrie App to control feeder

Image 5.2: A user interacting with the Moultrie App on a smartphone to control a feeder in a field setting.

5.3 Moultrie Connect with EDGE 3 Camera (Optional)

For remote control from greater distances, pair your feeder kit with a Moultrie EDGE 3 cellular camera.

  1. Ensure your EDGE 3 camera is set up and connected to the Moultrie Connect system.
  2. Follow the instructions within the Moultrie App to link your Pro Hunter III Feeder Kit to your EDGE 3 camera.
  3. This allows for remote adjustments to feed schedules and monitoring through the app, even when miles away.
Moultrie Connect ecosystem diagram

Image 5.3: Diagram illustrating the Moultrie Connect ecosystem, showing how the Moultrie App, EDGE 3 camera, and connected feeder interact for remote control.

6. Penyelenggaraan

Moultrie Pro Hunter III Feeder Kit distributing feed

Image 6.1: The feeder kit actively distributing feed, highlighting the importance of regular cleaning to maintain performance.

7. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
Feeder not dispensing feed.Low battery, clogged spinner, incorrect programming.Check battery charge. Clear any obstructions from the spinner plate and chute. Verify feed times and run-times in the app or on the unit.
Isu sambungan Bluetooth.Feeder out of range, Bluetooth off on phone, app issues.Ensure you are within Bluetooth range (typically 10-15 feet). Confirm Bluetooth is enabled on your device. Restart the Moultrie App.
Feed not spreading far enough.Motor speed set too low, feed type.Increase motor speed setting (High). Ensure feed is dry and free-flowing.
Feeder runs continuously.Programming error, faulty switch.Review programmed feed times and durations. If problem persists, contact customer support.

8. Spesifikasi

9. Waranti dan Sokongan

The Moultrie Pro Hunter III Deer Feeder Kit comes with a Waranti Pengeluar 1 Tahun.

For warranty claims, technical assistance, or additional support, please contact Moultrie Customer Service. Refer to the official Moultrie webtapak untuk maklumat hubungan semasa.

Sumber Dalam Talian: Lawati Moultrie Store untuk maklumat produk dan aksesori.

Dokumen Berkaitan - MFG-15097

Praview Arahan Kit Penyuap Kunci Cepat Moultrie Directional
Arahan langkah demi langkah untuk mengkonfigurasi, menguji dan memasang Kit Penyuap Kunci Pantas Moultrie Directional, termasuk pemasangan bateri, tetapan masa dan pemasangan pada pelbagai jenis penyuap.
Praview Panduan Pemasangan dan Pengendalian Corong Kunci Cepat Pengumpan Piawai Moultrie
Arahan terperinci untuk menyediakan dan menggunakan Penyuap Kunci Pantas Moultrie Standard. Meliputi pemasangan bateri, konfigurasi penyuap, tetapan pemasa, tempoh larian, ujian dan pemasangan corong dan kaki.
Praview Kit Penyumpan Moultrie Pro Hunter: Panduan Pemasangan dan Operasi
Arahan terperinci untuk menyediakan dan mengendalikan Kit Penyumpan Moultrie Pro Hunter (MFH-PHK). Meliputi penggerudian, pemasangan, pemasangan bateri, konfigurasi pemasa, tetapan suapan dan ujian. Termasuk petua berguna dan nasihat penyelesaian masalah untuk pemakanan hidupan liar yang optimum.
Praview Arahan Pemasangan Kit Hopper & Penyuap Graviti Siri 300lb Moultrie Ranch
Arahan pemasangan terperinci untuk Moultrie Ranch Series 300lb Hopper dan Kit Penyuap Graviti Siri Ranch pilihan. Termasuk senarai bahagian, panduan langkah demi langkah, dan penerangan teks rajah.
Praview Moultrie Standard Feeder: Panduan Pemasangan dan Konfigurasi
Panduan komprehensif untuk memasang, mengkonfigurasi dan memasang Penyumpan Kunci Pantas Moultrie Standard, termasuk persediaan bateri, pengaturcaraan pemasa dan pemasangan corong. Mempunyai arahan dan rajah langkah demi langkah.
Praview Pemasa Digital Universal Moultrie III: Panduan Persediaan, Pengaturcaraan dan Operasi
Arahan komprehensif untuk Moultrie Universal Digital Timer III, yang memperincikan persediaan melalui Aplikasi Moultrie atau pemasa terbina dalam, masa suapan pengaturcaraan, ujian yang dijalankan, prosedur tetapan semula kilang dan maklumat hubungan sokongan.