Antec AX65 ARGB PC Case Instruction Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Antec AX65 ARGB PC Case. Please read this manual thoroughly before beginning the assembly process to ensure proper installation and safe usage. Keep this manual for future reference.

Maklumat Keselamatan

• Sentiasa putuskan sambungan bekalan kuasa daripada soket dinding sebelum memasang atau menanggalkan sebarang komponen.
• Pakai tali pergelangan tangan anti-statik untuk mengelakkan kerosakan nyahcas elektrostatik (ESD) pada komponen.
• Handle all components with care.
• Jauhkan bahagian kecil daripada kanak-kanak.
• Pastikan pengudaraan yang betul semasa operasi untuk mengelakkan terlalu panas.

2. Kandungan Pakej

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your retailer or Antec support.

• Antec AX65 ARGB PC Case
• Kotak Aksesori (skru, pengikat kabel, kebuntuan, dsb.)
• Manual Pengguna (dokumen ini)

3. Persediaan dan Pemasangan Komponen

3.1 Persediaan

1. Unpack the PC case from its packaging.
2. Remove the tempered glass side panel by unscrewing the thumb screws at the rear and carefully sliding it off. Place it on a soft, flat surface to prevent scratches.
3. Remove the solid steel side panel by unscrewing the thumb screws at the rear and sliding it backward.
4. Gather necessary tools: Phillips head screwdriver, cable ties (some included in accessory box).

3.2 Pemasangan Motherboard

1. Identify the correct standoff locations for your motherboard form factor (ATX, Micro-ATX, Mini-ITX). Install any necessary additional standoffs from the accessory box.
2. Pasangkan pelindung I/O ke dalam bukaan belakang bekas.
3. Letakkan papan induk anda dengan berhati-hati pada penyangga, selaraskan lubang skru.
4. Pasangkan papan induk dengan skru yang disediakan. Jangan terlalu ketatkan.

3.3 Pemasangan Unit Bekalan Kuasa (PSU)

1. Position the PSU into the dedicated compartment at the bottom rear of the case.
2. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards (if no bottom vent).
3. Secure the PSU to the rear of the case with the provided screws.

3.4 Pemasangan Pemacu Storan

The AX65 supports both 2.5" SSDs and 3.5" HDDs.

• SSD 2.5": Mount SSDs to the dedicated brackets behind the motherboard tray or on the PSU shroud. Secure with screws.
• HDD 3.5": Install HDDs into the drive cage located under the PSU shroud. Slide the drive into the tray and secure it.

3.5 Expansion Card Installation (e.g., GPU)

1. Tanggalkan penutup slot PCI-E yang diperlukan dari belakang sarung.
2. Align your expansion card with the PCI-E slot on the motherboard.
3. Tekan dengan kuat sehingga kad diletakkan dengan betul.
4. Secure the card with the provided screw.

3.6 Pengurusan Kabel

Gunakan potongan penghalaan kabel dan titik ikat di belakang dulang papan induk untuk menyusun kabel. Ini meningkatkan aliran udara dan estetika.

3.7 Fan and Cooling Setup

The AX65 comes with three 120mm ARGB fans pre-installed at the front and one 120mm ARGB fan at the rear.

• Sambungan Kipas: Connect the 3-pin ARGB fan cables to your motherboard's ARGB headers or a compatible ARGB controller. Connect the fan power cables to available fan headers on your motherboard or a fan hub.
• Sokongan Penyejukan Cecair: The front panel supports radiators up to 360mm. The top panel supports up to two 120mm or 140mm fans, or a 240mm radiator.

4. Arahan Operasi

4.1 Menghidupkan

After all components are installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Flip the switch on your PSU to the 'ON' position, then press the power button on the case's top I/O panel.

4.2 Kawalan Pencahayaan ARGB

The pre-installed ARGB fans can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) if connected to a compatible 3-pin 5V ARGB header. Refer to your motherboard manual for specific software instructions.

4.3 Panel I/O Hadapan

The convenient top I/O panel provides easy access to essential ports and controls:

• Butang Kuasa
• Butang Tetapkan Semula
• Port USB 3.0
• Port USB 2.0 (x2)
• Bicu Fon Kepala
• Mikrofon Jack

5. Penyelenggaraan

5.1 Pembersihan Penapis Habuk

Regular cleaning of dust filters is crucial for maintaining optimal airflow and cooling performance.

• Top Magnetic Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with a soft brush or rinse with water (ensure it is completely dry before reattaching).
• Bottom Pull-out Filter: Slide out the dust filter located at the bottom of the case (under the PSU). Clean it similarly to the top filter.

5.2 Pembersihan Am

Gunakan yang lembut, damp cloth to wipe down the exterior surfaces of the case. Avoid abrasive cleaners or solvents. For internal cleaning, use compressed air to remove dust from components and fan blades.

6. Penyelesaian masalah

Jika anda menghadapi masalah, rujuk langkah penyelesaian masalah biasa berikut:

• Tiada Kuasa: Ensure the PSU is switched on, the power cable is securely connected, and all internal power cables (24-pin, CPU, GPU) are properly seated. Check front panel power button connections to the motherboard.
• Fans Not Spinning/ARGB Not Lighting: Verify fan power cables are connected to motherboard headers or a fan hub. Ensure ARGB cables are connected to a 3-pin 5V ARGB header and controlled via software. Check for loose connections.
• Terlalu panas: Ensure all fans are spinning correctly and oriented for proper airflow. Clean dust filters. Verify CPU cooler and GPU cooler are properly installed.
• Komponen longgar: If experiencing intermittent issues, re-seat RAM, GPU, and other expansion cards. Check all cable connections.

For persistent issues, consult your component manuals or contact Antec customer support.

7. Spesifikasi

8. Waranti dan Sokongan

Antec products are designed and manufactured to the highest quality standards. For information regarding warranty coverage and technical support, please refer to the official Antec webtapak atau hubungi peruncit tempatan anda. Simpan bukti pembelian anda untuk tuntutan waranti.

For further assistance, visit the Antec support page: www.antec.com/support