1. Pengenalan
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Ergosolid G70 Gas Spring Articulated Monitor Arm. Please read this manual thoroughly before installation and retain it for future reference.
2. Maklumat Keselamatan
Sila patuhi langkah berjaga-jaga keselamatan berikut semasa pemasangan dan penggunaan:
- Ensure all components are present and undamaged before installation. Do not use if any parts are missing or faulty.
- This product contains a high-pressure gas spring. Do not attempt to disassemble the gas spring unit.
- Do not exceed the maximum weight capacity of 12 kg (26.4 lbs) or the specified monitor size range of 22-35 inches.
- Install the monitor arm on a sturdy desk surface capable of supporting the combined weight of the arm and your monitor.
- Ketatkan semua skru dengan kukuh, tetapi jangan terlalu ketatkan untuk mengelakkan benang tertanggal atau merosakkan komponen.
- Jauhkan kanak-kanak dan haiwan peliharaan semasa pemasangan.
3. Kandungan Pakej
Sahkan bahawa semua komponen berikut disertakan dalam pakej anda:
- Perhimpunan Lengan Monitor
- Meja Clamp Pangkalan
- Tapak Pemasangan Grommet
- Plat VESA
- Kit Perkakasan (skru, pencuci, spacer)
- Hex Keys for adjustment
- Manual Arahan
4. Keserasian
The Ergosolid G70 monitor arm is designed for optimal performance with the following specifications:
- Saiz Monitor: 22 hingga 35 inci (56 hingga 89 cm)
- Monitor Berat: 2 hingga 12 kg (4.4 hingga 26.4 lbs)
- Keserasian VESA: 75x75 mm and 100x100 mm
5. Pemasangan
Lengan monitor menawarkan dua kaedah pemasangan: penutup mejaamp dan pelekap grommet.
5.1. Choose Your Mounting Method
5.1.1. Meja Clamp Pemasangan
- Lampirkan meja clamp base to the edge of your desk.
- Ketatkan clamp skru sehingga tapaknya dipasang dengan kukuh pada meja.
- Insert the main pole of the monitor arm into the clamp asas.
5.1.2. Pemasangan Grommet
- If your desk has a grommet hole, insert the grommet mount base through the hole.
- Secure the base from underneath the desk using the provided plate and nut.
- Insert the main pole of the monitor arm into the grommet base.
5.2. Memasang Monitor
- Attach the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure the VESA plate is oriented correctly (usually with an "UP" indicator).
- Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
- Secure the monitor to the arm by tightening the locking screw on the VESA head.
5.3. Pengurusan Kabel
The monitor arm features an integrated cable management system. Route your monitor's power and video cables through the designated channels along the arm to maintain a tidy workspace.
6. Adjustments and Operation
The Ergosolid G70 monitor arm offers a range of adjustments for optimal ergonomic positioning.
6.1. Pelarasan Tegangan Pegas Gas
The gas spring tension needs to be adjusted to match your monitor's weight for smooth movement. Use the provided hex key to turn the adjustment screw on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at any desired height without drifting up or down.
6.2. Pelarasan Ketinggian
Once the gas spring tension is correctly set, you can effortlessly raise or lower your monitor by gently pushing or pulling the monitor to the desired height. The arm allows for a height adjustment range of up to 530 mm.
6.3. Penyesuaian Tilt
The monitor can be tilted from +85° (upwards) to -30° (downwards) to reduce glare and optimize viewing angles. Simply grasp the monitor and tilt it to your preferred angle.
6.4. Swivel Adjustment
The arm allows for a 90° lateral rotation (swivel) to the left and right, enabling you to share your screen or adjust your viewing position easily.
6.5. Rotation (Pivot)
The monitor can be rotated 360° from landscape to portrait orientation without removing it from the arm.
6.6. Retraction/Extension
The articulated arm allows for extension and retraction, providing a maximum reach of 650 mm to position your monitor at the ideal distance from your eyes.
7. Penyelenggaraan
To ensure the longevity and optimal performance of your Ergosolid G70 monitor arm, follow these maintenance guidelines:
- Pembersihan: Wipe the arm surfaces with a soft, damp kain. Elakkan pembersih atau pelarut yang melelas yang boleh merosakkan kemasan.
- Pemeriksaan Berkala: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
- Spring Gas: The gas spring is maintenance-free. Do not attempt to lubricate or disassemble it.
8. Penyelesaian masalah
If you encounter any issues with your monitor arm, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Monitor drifts down or up | Gas spring tension is incorrect for monitor weight. | Adjust the gas spring tension using the hex key. Increase tension for heavier monitors (clockwise), decrease for lighter monitors (counter-clockwise). |
| Monitor is wobbly or unstable | Mounting screws are loose or desk is unstable. | Ensure all mounting screws (clamp/grommet and VESA plate) are securely tightened. Verify desk stability. |
| Difficulty moving the arm | Gas spring tension is too high or joints are too tight. | Decrease gas spring tension. Check and slightly loosen any joint screws if movement is excessively stiff. |
| Monitor cannot be rotated (pivot) | Rotation mechanism is too tight. | Check for any locking screws on the rotation mechanism and loosen slightly if present. |
9. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Model | G70 |
| Jenama | Ergosolid |
| bahan | aluminium |
| warna | grafit |
| Saiz Monitor yang Serasi | 22 - 35 inci (56 - 89 cm) |
| Kapasiti Berat | 2 - 12 kg (4.4 - 26.4 paun) |
| Keserasian VESA | 75x75 mm, 100x100 mm |
| Jenis Pemasangan | Meja Clamp, Gunung Grommet |
| Pelarasan Ketinggian | Sehingga 530 mm |
| Sudut Kecondongan | +85° / -30° |
| Sudut Pusing | 90° (kiri/kanan) |
| Rotation (Pivot) | 360° |
| Sambungan Maks | 650 mm |
| Dimensi Produk | 44 x 23 x 13 cm (berbungkus) |
| Berat Produk | 4.91 kg |
10. Waranti dan Sokongan
For warranty information and customer support, please refer to the official Ergosolid website or contact your retailer. The return policy for this product, if purchased through Amazon, is typically 6 days for refund/replacement, fulfilled by Amazon. Specific warranty terms are provided by the manufacturer.
You can visit the Ergosolid brand store for additional information and support: Ergosolid Brand Store
