1. Pengenalan
Terima kasih kerana membeliasing the MEDALight F30 Mini Camera Flash. This compact and powerful manual hot shoe flash is designed to provide versatile lighting for your photography needs. With its GN15 guide number and 7 power levels, it offers precise control over light output. Please read this manual thoroughly before using the product to ensure proper operation and to maximize its performance.
2. Apa yang ada di dalam Kotak
- MEDALight F30 Mini Camera Flash
- Kotak Hadiah
3. Maklumat Keselamatan
To prevent damage to the product or injury to yourself or others, please observe the following safety precautions:
- Do not disassemble, repair, or modify the flash unit.
- Pastikan unit denyar kering. Jangan dedahkannya kepada hujan, kelembapan atau kelembapan yang tinggi.
- Do not touch the flash tube immediately after firing, as it can be very hot.
- Jauhkan daripada kanak-kanak.
- Use only the specified battery type (9V battery). Ensure correct polarity when inserting batteries.
- Remove batteries if the flash will not be used for an extended period.
4. Pengenalan Bahagian
This image displays the MEDALight F30 Mini Camera Flash. The main view shows the flash unit attached to a camera's hot shoe. In the upper left, a front view of the flash highlights the flash tube and the 'MEDALight' logo. In the upper center, a side view reveals the 'ON/OFF' switch. In the upper right, a top view shows the power level indicators (1/1 to 1/64), a charge indicator, and '+' and '-' buttons for adjustment, along with S1 and S2 optical slave modes.
- Tiub Kilat: Memancarkan cahaya untuk penerangan.
- Suis ON / OFF: Powers the flash unit on or off.
- Penunjuk Tahap Kuasa: LEDs indicating the current power output (1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64).
- Petunjuk Caj: LED that illuminates when the flash is ready to fire.
- Butang '+': Increases flash power output.
- '-' Butang: Decreases flash power output.
- Pemasangan Kasut Panas: Connects the flash to the camera's hot shoe.
- S1/S2 Optical Slave Sensors: Detect other flash bursts for off-camera triggering.
5. Persediaan
5.1 Pemasangan Bateri
- Cari penutup petak bateri pada unit lampu kilat.
- Buka penutup.
- Insert one 9V battery (included) into the compartment, ensuring correct polarity (+/-).
- Tutup penutup petak bateri dengan selamat.
5.2 Melekap pada Kamera
- Slide the hot shoe mount of the F30 flash into your camera's hot shoe slot.
- Ketatkan gelang pengunci pada unit denyar untuk mengikatnya dengan kuat pada kamera.
- Ensure the flash is properly seated and stable before use.
6. Arahan Operasi
6.1 Menghidupkan/Mematikan
Luncurkan HIDUP/MATI switch to the 'ON' position to power on the flash. Slide it to 'OFF' to power off.
6.2 Melaraskan Tahap Kuasa
Once powered on, the flash will begin charging. The charge indicator LED will illuminate when the flash is ready to fire. Use the '+' dan '-' buttons to adjust the flash power output. The power level indicators will show the current setting, ranging from 1/1 (full power) down to 1/64.
- Tekan '+' to increase power (e.g., from 1/64 to 1/32).
- Tekan '-' to decrease power (e.g., from 1/1 to 1/2).
6.3 Using Optical Slave Modes (S1/S2)
The F30 flash features S1 and S2 optical slave modes for off-camera triggering. These modes allow the F30 to fire in sync with another flash unit.
- Mod S1: The flash will fire when it detects the first flash burst from a master flash. This is suitable for manual flash systems.
- Mod S2: The flash will ignore the pre-flash (if any) from a master flash and fire on the second flash burst. This is suitable for TTL flash systems that emit a pre-flash.
To activate S1 or S2 mode, ensure the flash is powered on and then press the appropriate button (S1 or S2) on the top panel. The corresponding indicator will light up.
6.4 Nota Keserasian
This flash is compatible with Sony ZV1, ZV-E10, Ricoh GR3, Nikon, Canon, Fuji, Digital Film Cameras, and DSLR Cameras. It is NOT compatible with Sony ZV-1F.
7. Penyelenggaraan
7.1 Pembersihan
To clean the flash unit, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or strong chemicals, as they may damage the surface or internal components.
7.2 Penyimpanan
When not in use for an extended period, store the flash unit in a cool, dry place. Remove the 9V battery to prevent leakage and potential damage to the flash.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu kilat tidak boleh dihidupkan. | Bateri mati atau salah dimasukkan. | Periksa kekutuban bateri atau gantikan dengan bateri 9V baharu. |
| Flash tidak menyala. | Flash not fully charged; hot shoe connection loose; camera settings incorrect. | Wait for charge indicator to light up; ensure flash is securely mounted; check camera's flash settings. |
| Denyar menyala secara tidak konsisten dalam mod hamba. | Incorrect slave mode (S1/S2) selected; sensor obstructed; ambient light interference. | Ensure correct S1/S2 mode for your master flash; clear any obstructions from the sensor; test in different lighting conditions. |
9. Spesifikasi
- model: F30
- Nombor Panduan (GN): 15
- Tahap Kuasa: 7 (1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64)
- Kelajuan Penyegerakan Denyar: 1/500s
- Camera Flash Type: Kasut panas
- Bateri: Bateri 1 x 9V (termasuk)
- Berat Barang: 3.52 auns (lebih kurang 100g)
- Dimensi Pakej: 3.94 x 3.94 x 0.79 inci (10 x 10 x 2 cm)
- Pemasangan yang Serasi: Sony ZV1, ZV-E10, Ricoh GR3, Nikon, Canon, Fuji, Digital Film Cameras, DSLR Cameras (Not Compatible for Sony ZV-1F)
- Pengeluar: Zhuhai jingjia technology co.,ltd
10. Waranti & Sokongan
Untuk maklumat jaminan atau sokongan teknikal, sila rujuk dokumentasi yang disediakan bersama pembelian anda atau hubungi penjual/pengilang secara langsung. Simpan bukti pembelian anda untuk sebarang tuntutan jaminan.
