Duronic DM6A2 Dual Monitor Arm User Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Duronic DM6A2 Dual Monitor Arm. The DM6A2 is designed to securely hold two computer monitors, offering flexible adjustments for an ergonomic workspace. It features a gas spring mechanism for smooth height adjustments and integrated cable management to maintain an organized desk.

Image 1.1: The Duronic DM6A2 Dual Monitor Arm supporting two monitors.

2. Maklumat Keselamatan

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in product damage, injury, or property damage.

• Ensure your desk surface is strong enough to support the combined weight of the monitor arm and two monitors.
• Do not exceed the maximum weight capacity of 9 kg (19.8 lbs) per arm.
• Ensure all screws are tightened securely before use. Do not overtighten.
• Jauhkan kanak-kanak dan haiwan peliharaan dari kawasan pemasangan.
• Adjust the gas spring tension carefully to match your monitor's weight. Improper tension can cause monitors to drop or spring up unexpectedly.

3. Kandungan Pakej

Verify that all components are present before beginning installation. If any parts are missing or damaged, please contact Duronic customer support.

• Main pole and base
• Two monitor arms with gas springs
• Two VESA mounting plates
• Meja klamp and grommet mounting hardware
• Cable management clips/covers
• Assembly tools (Allen keys, screws)

4. Arahan Persediaan

4.1. Choose Your Mounting Method (Clamp atau Grommet)

The DM6A2 offers two installation options: desk clamp or grommet mount. Select the method suitable for your desk.

Image 4.1: Desk clamp supports thickness from 15mm to 100mm. Grommet mount supports thickness from 15mm to 50mm.

4.1.1. Meja Clamp Pemasangan

1. Lampirkan clamp base to the main pole.
2. Letakkan clamp di tepi meja anda.
3. Ketatkan clamp screw until the arm is securely fastened to the desk. Ensure it is stable.

4.1.2. Pemasangan Grommet

1. If your desk has a grommet hole, insert the grommet base through the hole.
2. Secure the base from underneath the desk using the provided plate and nut.
3. Pasangkan tiang utama pada tapak grommet.

4.2. Attach VESA Plates to Monitors

The DM6A2 supports VESA 75x75mm and 100x100mm mounting patterns.

Image 4.2: The DM6A2 supports monitors from 13 to 32 inches and VESA patterns 75x75mm and 100x100mm, with a maximum weight of 9kg per arm.

1. Carefully place your monitor face down on a soft, clean surface.
2. Align the VESA mounting plate with the screw holes on the back of your monitor.
3. Secure the plate using the appropriate screws provided. Do not overtighten.

4.3. Pasangkan Monitor ke Lengan

1. Slide the VESA plate with the attached monitor onto the end of each monitor arm.
2. Ensure the monitor is securely seated on the arm.
3. Tighten any locking screws on the VESA head to prevent accidental detachment.

4.4. Laraskan Ketegangan Spring Gas

The gas spring mechanism allows for smooth and stable monitor positioning. You must adjust the tension to match the weight of your monitors.

Image 4.3: The internal gas spring mechanism provides smooth monitor adjustments.

Image 4.4: Adjust the gas spring tension using the provided tool.

1. Use the provided Allen key to adjust the tension screw located on the arm.
2. Turn clockwise to increase tension (for heavier monitors) or counter-clockwise to decrease tension (for lighter monitors).
3. Adjust until the monitor stays at the desired height when released, without drifting up or down.

4.5. Pengurusan Kabel

Route your monitor cables through the integrated cable management clips or covers on the arms to keep your workspace tidy.

Image 4.5: Cables are neatly organized using the arm's cable management system.

5. Arahan Pengendalian (Pelarasan)

The Duronic DM6A2 offers a range of adjustments for optimal viewkeselesaan.

5.1. Pelarasan Ketinggian

Gently push or pull the monitor to the desired vertical position. The gas spring will hold it in place once the tension is correctly set.

5.2. Penyesuaian Tilt

The monitor can be tilted up or down to reduce glare and improve viewsudut-sudut.

Image 5.1: The monitor can be tilted from -90° to +85°.

5.3. Swivel Adjustment

Swivel the monitor left or right to share your screen with others or adjust your viewsudut ing.

Image 5.2: The monitor can swivel +/-90°.

5.4. Rotation Adjustment

Putar monitor 360 darjah untuk bertukar antara orientasi landskap dan potret.

Image 5.3: The monitor can rotate 360° for landscape or portrait viewing.

6. Penyelenggaraan

• Pembersihan: Lap lengan monitor dengan kain lembut,amp kain. Elakkan pembersih yang kasar.
• Pemeriksaan Berkala: Regularly check all screws and connections to ensure they remain tight and secure. Retighten if necessary.
• Pelarasan Spring Gas: If your monitor's weight changes, or if the arm starts to drift, readjust the gas spring tension as described in Section 4.4.

7. Penyelesaian masalah

• Monitor sags or drops: The gas spring tension is too low for the monitor's weight. Increase tension by turning the adjustment screw clockwise.
• Monitor springs up or is difficult to push down: The gas spring tension is too high for the monitor's weight. Decrease tension by turning the adjustment screw counter-clockwise.
• Arm is unstable: Pastikan meja clamp or grommet mount is securely tightened to the desk. Check all arm connections for tightness.
• Monitor does not rotate/tilt/swivel smoothly: Check for any obstructions. Ensure the pivot points are not overtightened. A small amount of silicone lubricant can be applied to moving parts if needed, but avoid contact with electrical components.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Duronic website. If you encounter any issues not covered in this manual, please contact Duronic customer service for assistance.