Manual Arahan Sepana Impak Tanpa Berus Kress KU270S 20V

1. Arahan Keselamatan

Always observe basic safety precautions when using this power tool to reduce the risk of fire, electric shock, and personal injury. Read all instructions before operating the tool.

Keselamatan Alat Kuasa Am

• Keselamatan Kawasan Kerja: Pastikan kawasan kerja bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan. Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
• Keselamatan Elektrik: Elakkan sentuhan badan dengan permukaan yang dibumikan atau dibumikan. Jangan dedahkan alatan kuasa kepada hujan atau keadaan basah.
• Keselamatan Diri: Always wear eye protection, hearing protection, and appropriate clothing. Use personal protective equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions.
• Penggunaan dan Penjagaan Alat: Jangan paksa alat kuasa. Gunakan alat kuasa yang betul untuk aplikasi anda. Putuskan sambungan pek bateri daripada alat kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alatan kuasa.

Keselamatan Pek Bateri

• Jangan tanggalkan, buka atau carikkan pek bateri.
• Jangan litar pintas pek bateri.
• Jangan dedahkan pek bateri kepada haba atau api. Elakkan penyimpanan di bawah cahaya matahari langsung.
• Jangan biarkan pek bateri terkena kejutan mekanikal.
• In case of battery leakage, avoid contact with the skin and eyes. If contact has occurred, wash the affected area with copious amounts of water and seek medical advice.

2. Produk Lebihview

The Kress KU270S 20V Brushless Impact Wrench is designed for efficient fastening and loosening tasks, offering high torque and precision control.

Rajah 1: Kress KU270S Impact Wrench with 4.0Ah battery, charger, M22 socket, cylindrical pin, belt, and steel cable baffle ring.

Komponen yang Disertakan

• Kress KU270S Impact Wrench
• 2x 4.0Ah Batteries
• Pengecas 2A
• M22 Socket
• Pin Silinder
• tali pinggang
• Steel Cable Baffle Ring

Ciri-ciri Utama

• Motor tanpa berus berkuasa: Delivers up to 300Nm max torque for fastening and 330Nm nut busting torque for loosening.
• Kawalan Ketepatan: Variable 3-mode gear control with 2-speed settings.
• Auto-Stop Reverse: Automatically halts reverse rotation to prevent nut loss and over-rotation.
• Reka bentuk tanpa wayar: Powered by 20V KrossPack batteries for portability.

3. Persediaan

Pemasangan dan Pengecasan Bateri

1. Mengecas Bateri: Connect the 2A charger to a power outlet. Insert the 4.0Ah battery into the charger. The indicator light on the charger will show the charging status. Ensure the battery is fully charged before first use.
2. Memasang Bateri: Align the battery pack with the base of the impact wrench handle. Slide the battery into place until it clicks securely.
3. Mengeluarkan Bateri: Press the battery release button (if present) and slide the battery pack out of the tool.

Lampiran Soket

1. Pastikan alat dimatikan dan bateri dikeluarkan.
2. Align the M22 socket with the 1/2-inch square drive on the impact wrench.
3. Push the socket firmly onto the drive until it locks into place.
4. To remove, pull the socket off the drive while holding the tool securely.

4. Arahan Operasi

Familiarize yourself with the tool's controls before beginning any work.

Rajah 2: The Kress KU270S Impact Wrench in use for automotive applications.

Menghidupkan/Mematikan

• To turn on the tool, press the trigger switch. The tool's speed is variable depending on how far the trigger is pressed.
• Untuk mematikan alat, lepaskan suis pencetus.

Pemilihan Kelajuan

The KU270S features a 2-speed mode selector. Use the speed selector switch (typically located near the top of the tool) to choose between low and high-speed settings. Lower speeds are suitable for delicate tasks or when starting, while higher speeds provide maximum torque for stubborn fasteners.

Auto-Stop Reverse Function

This feature is designed to prevent nuts from falling off after being loosened. When operating in reverse mode, the tool will automatically stop rotation once the fastener is loose, allowing you to safely remove it by hand. To activate, select the reverse direction and engage the auto-stop mode (refer to specific tool markings if available).

Operasi Am

1. Ensure the correct socket size is attached and securely fastened.
2. Select the desired speed and direction (forward for tightening, reverse for loosening).
3. Place the socket onto the fastener.
4. Press the trigger to begin operation. Apply steady pressure to the tool.
5. For tightening, ensure fasteners are tightened to the manufacturer's recommended torque specifications using a torque wrench if precision is required.

5. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your Kress Impact Wrench.

Pembersihan

• Pastikan slot pengudaraan alat bersih untuk mengelakkan terlalu panas.
• Gunakan yang lembut, damp kain untuk membersihkan bahagian luar alat. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
• Periodically clean the battery terminals with a clean cloth.

Penyimpanan

• Store the tool and battery in a cool, dry place, away from direct sunlight and moisture.
• Pastikan bateri dicas sebahagian (sekitar 50%) sebelum penyimpanan jangka panjang.
• Jauhkan daripada kanak-kanak.

Penjagaan Bateri

• Jangan simpan bateri dalam keadaan dinyahcas.
• Elakkan daripada mendedahkan bateri kepada suhu yang melampau.
• If the battery is not used for extended periods, charge it every 3-6 months to maintain its health.

6. Penyelesaian masalah

If you encounter issues with your Kress KU270S Impact Wrench, refer to the following common solutions:

• Alat tidak bermula:
  • Periksa sama ada bateri telah dicas sepenuhnya dan dipasang dengan betul.
  • Ensure the trigger switch is fully depressed.
• Reduced power or torque:
  • Bateri mungkin rendah; cas semula.
  • The socket may be worn or incorrect for the fastener.
  • The tool may be operating in a lower speed setting; adjust as needed.
• Alat terlalu panas:
  • Pastikan slot pengudaraan bersih daripada serpihan.
  • Allow the tool to cool down before continued use. Avoid prolonged heavy-duty operation without breaks.
• Soket tidak dipasang dengan selamat:
  • Check for debris in the square drive.
  • Ensure the socket is compatible with a 1/2-inch drive.

Jika masalah berterusan, hubungi sokongan pelanggan.

7. Spesifikasi

Technical data for the Kress KU270S 20V Brushless Impact Wrench:

8. Waranti dan Sokongan

Maklumat Waranti

• Machine Warranty: 1 Tahun dari tarikh pembelian.
• Waranti Bateri: 6 Bulan dari tarikh pembelian.

Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage due to misuse, abuse, alteration, or normal wear and tear.

Sokongan Pelanggan

For technical assistance, service, or warranty claims, please refer to the contact information provided with your purchase documentation or visit the official Kress webtapak.