1. Pengenalan
This manual provides essential instructions for the safe and efficient use of your GT POWER 3 Amps AC Adapter. This smart charger is specifically designed for 48V Lithium Battery Electric Bikes, such as the Macfox X2 Mountain Bike EL-M21. It features automatic charging cessation when the battery is full, ensuring battery longevity and preventing overcharging.
The charger incorporates advanced protection mechanisms including Over Voltage Protection (OVP), Over Current Output Protection (OCP), and Short Circuit Output Protection (SCP) to safeguard both the charger and your electric bike's battery.
2. Produk Lebihview
The GT POWER AC Adapter is a compact and robust charging unit. Familiarize yourself with its components:
Rajah 2.1: Depan view of the GT POWER 3 Amps AC Adapter, showing the technical label with input/output specifications and safety certifications.
Rajah 2.2: Atas view of the charger, highlighting the LED indicator for charging status and the attached output cable.
Figure 2.3: Detail of the barrel connector, which connects to the electric bike's charging port.
Figure 2.4: The detachable AC power cable, used to connect the charger to a wall outlet.
3. Persediaan dan Sambungan
Follow these steps to properly set up and connect your charger:
- Ensure the charger is placed on a stable, flat surface in a well-ventilated area, away from direct sunlight or heat sources.
- Connect the detachable AC power cable (Figure 2.4) into the charger's AC input port.
- Plug the other end of the AC power cable into a standard 110V AC wall outlet.
- Connect the barrel connector (Figure 2.3) from the charger's output cable securely into the charging port of your 48V Lithium Battery Electric Bike (e.g., Macfox X2 EL-M21).
- Verify all connections are firm before proceeding.
Maklumat Keselamatan Penting:
- This charger is designed for indoor use only. Do not expose it to rain, moisture, or extreme temperatures.
- Only use with compatible 48V Lithium-ion batteries. Using it with other battery types may cause damage or safety hazards.
- Do not attempt to open or modify the charger. Refer all servicing to qualified personnel.
4. Arahan Operasi
Once properly connected, the charger will begin the charging process automatically. Monitor the LED indicator on the charger for status updates:
Status Penunjuk LED:
- LED Merah: Menunjukkan bateri sedang dicas.
- LED hijau: Indicates charging is complete. The smart charger will automatically stop charging to prevent overcharge.
Once the LED turns green, you may disconnect the charger from the electric bike and then from the wall outlet. It is recommended to disconnect the charger from the power source when not in use.
5. Penyelenggaraan dan Penjagaan
Proper maintenance ensures the longevity and safe operation of your charger:
- Pembersihan: Disconnect the charger from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storan: Store the charger in a cool, dry place when not in use. Avoid extreme temperatures and humidity.
- Penjagaan Kabel: Do not bend or crimp the cables excessively. Avoid placing heavy objects on the cables. Inspect cables regularly for any signs of damage.
- Pengudaraan: Ensure the charger's ventilation openings are not blocked during operation to prevent overheating.
6. Penyelesaian masalah
If you encounter issues with your charger, refer to the following table:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Charger LED not lighting up / Not charging | No power from outlet; Loose connection; Faulty cable; Battery already full. | Check wall outlet with another device; Ensure all cables are securely connected; Inspect cables for damage; If battery is full, LED will be green or off. |
| Charger feels excessively hot | Poor ventilation; Overload; Internal fault. | Ensure charger is in a well-ventilated area; Disconnect and allow to cool; If problem persists, discontinue use and contact support. |
| Green LED but battery not fully charged | Battery issue; Charger fault. | Verify battery health; Ensure charger is compatible with your specific battery; Contact support if issues persist. |
7. Spesifikasi
- model: 522b
- Input Voltage: 100-240V AC, 50/60Hz
- Keluaran Voltage: 54.6V DC
- Arus Keluaran: 3 Amps
- Wattage: 165 Watt
- Jenis Penyambung: tong
- Peranti Serasi: 48V Lithium Battery Electric Bikes (e.g., Macfox X2 Electric Mountain Bike EL-M21)
- Ciri Khas: Automatic Off (when battery is full), Over Voltage Protection (OVP), Over Current Output Protection (OCP), Short Circuit Output Protection (SCP)
- Komponen yang Disertakan: AC Adapter, Power Cable
8. Waranti dan Sokongan
Your GT POWER 3 Amps AC Adapter comes with a Waranti Setahun dari tarikh pembelian, meliputi kecacatan pembuatan. Selain itu, a Jaminan Wang Dikembalikan 30 Hari is offered for your peace of mind.
For technical support, warranty claims, or any questions regarding the product, please contact your retailer or the manufacturer's customer service. Please have your model number (522b) and proof of purchase ready when contacting support.
