Polibi King Size Luxury Upholstered Platform Bed

1. Arahan Keselamatan

Sila baca dan fahami semua arahan sebelum pemasangan dan penggunaan produk ini. Kegagalan mematuhi arahan ini boleh mengakibatkan kecederaan atau kerosakan pada produk.

• Jauhkan semua bahagian kecil dan bahan pembungkusan daripada kanak-kanak dan haiwan peliharaan.
• Pasang katil pada permukaan yang lembut dan bersih untuk mengelakkan calar.
• Pastikan semua sambungan diketatkan dengan selamat sebelum digunakan. Periksa dan ketatkan semula secara berkala jika perlu.
• Jangan melebihi kapasiti berat maksimum 1000 lbs.
• Use only the recommended mattress heights (6", 8", 10", 12") for optimal support and fit.
• Jangan berdiri atau melompat di atas rangka katil.
• Jika mana-mana bahagian hilang atau rosak, jangan teruskan pemasangan. Hubungi khidmat pelanggan dengan segera.

2. Kandungan Pakej

Your Polibi King Size Luxury Upholstered Platform Bed is shipped in two manageable boxes. Please verify that all components are present before beginning assembly.

Komponen:

• Kepala katil berlapis
• Upholstered Side Rails (2)
• Kaki Kaki Berlapis
• Pancaran Sokongan Pusat
• Solid Wood Slats (20 pieces, 10cm wide)
• Support Legs (various, including adjustable height options)
• Hardware Pack (bolts, washers, nuts, L-wrench, hammer)
• Arahan Perhimpunan

A power drill (not included) is recommended for quicker assembly.

3. Persediaan dan Pemasangan

Follow these steps carefully to assemble your Polibi King Size Luxury Upholstered Platform Bed.

1. Buka bungkus dan Kenalpasti Bahagian: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Refer to the parts list to ensure all pieces are present.
2. Pasang Rel Sisi pada Kepala katil: Connect the upholstered side rails to the headboard using the provided hardware. Ensure the connections are firm but do not fully tighten yet.
3. Pasangkan Papan Kaki: Connect the upholstered footboard to the other end of the side rails. Once all four sides are connected, gently tighten all bolts.
4. Pasang Pancaran Sokongan Pusat: Place the center support beam along the length of the bed frame. Secure it to the headboard and footboard brackets using the designated hardware.
5. Pasang Kaki Sokongan: Screw the support legs into the designated points on the frame and center support beam. Ensure they are stable and level.
6. Pasang Bilah: Lay the solid wood slats across the bed frame, fitting them into the designated slots or attaching them with screws if required. Ensure even spacing. The slats are 10cm wide for enhanced support.
7. Adjust Mattress Height (Optional): The bed frame is designed to accommodate mattresses of 6", 8", 10", or 12" heights. Adjust the bed frame installation method as per the separate instructions provided in the package to achieve the desired mattress height. This typically involves adjusting the height of the support brackets for the slats.

4. Operasi dan Penggunaan

Once assembled, your Polibi King Size Luxury Upholstered Platform Bed is ready for use.

• Peletakan tilam: Carefully place your mattress onto the installed slats. The embedded design helps keep the mattress securely in place.
• Kapasiti Berat: The bed frame is designed to support up to 1000 lbs, including the mattress and occupants.
• Silent Sleep: Each support point is covered with sponge stickers to prevent noise, contributing to a quiet sleep environment.

5. Penyelenggaraan

Penjagaan yang betul akan memanjangkan hayat dan penampilan katil platform upholsteri anda.

• Penjagaan Fabrik: The bed is upholstered with premium, waterproof polyester fabric. For general cleaning, gently wipe with a damp kain. Untuk tumpahan, lap segera dengan kain bersih dan kering. Elakkan bahan kimia yang keras atau pembersih yang kasar.
• Berhabuk: Regularly dust the headboard and frame with a soft, dry cloth or a vacuum cleaner with a brush attachment.
• Pemeriksaan perkakasan: Periodically check all bolts and connections to ensure they remain tight. Re-tighten as needed to maintain stability.
• Elakkan Cahaya Matahari Terus: Prolonged exposure to direct sunlight may cause fabric fading.

6. Penyelesaian masalah

Rujuk bahagian ini untuk penyelesaian kepada isu biasa.

• Bunyi Berdecit:
  • Pastikan semua bolt dan skru diketatkan dengan kukuh.
  • Check that the slats are properly seated and not rubbing against the frame. The sponge stickers on support points are designed to prevent noise.
  • Sahkan bahawa tilam berada di kedudukan yang betul dan tidak menyebabkan geseran.
• Katil Terasa Tidak Stabil:
  • Re-check all connections, especially where the side rails meet the headboard and footboard, and the center support beam.
  • Ensure all support legs are firmly attached and making even contact with the floor.
• Tilam Gelongsor:
  • The embedded design should prevent mattress sliding. Ensure the mattress is fully seated within the frame.
  • Verify that the correct mattress height setting was chosen during assembly.

7. Spesifikasi

8. Waranti dan Sokongan

For specific warranty information and customer support, please refer to the documentation included with your purchase or contact Polibi customer service directly. Keep your purchase receipt for warranty claims.

If you encounter any issues not covered in this manual or require further assistance, please reach out to our support team.

Maklumat Hubungan: Please refer to the contact details provided on the product packaging or the official Polibi webtapak.