VECELO Full Size Upholstered Platform Bed Frame

Produk Selesaiview

This manual provides instructions for the VECELO Full Size Upholstered Platform Bed Frame. This bed frame features an adjustable, button-tufted headboard, wood slat support, and does not require a box spring. It is designed for a full-size mattress.

Figure 1: Assembled VECELO Full Size Upholstered Platform Bed Frame.

Ciri-ciri Utama:

• Kepala katil berlapis kain: Features linen fabric and button tufting.
• Ketinggian Kepala Katil Boleh Laras: Can be set between 41 and 47 inches to accommodate mattresses from 6 to 12 inches thick.
• Wood Slat Support: Provides direct support for the mattress, eliminating the need for a box spring.
• Pembinaan yang kukuh: Combines high-hardness metal and quality wood, with a maximum weight capacity of 800 lbs.
• Reka Bentuk Bebas Bunyi: Slats are designed with Velcro to prevent friction, and legs include non-slip foot pads.

Maklumat Keselamatan

Please read and understand all safety warnings before assembly and use. Failure to follow these instructions may result in injury or product damage.

• Jangan melebihi kapasiti berat maksimum bagi 800 paun.
• Ensure all parts and screws are firmly attached before and during use. Regularly check connections for tightness.
• Exercise caution when handling metal parts during assembly to avoid sharp edges.
• Jauhkan bahagian kecil daripada kanak-kanak semasa pemasangan untuk mengelakkan bahaya tercekik.
• Assemble the bed frame on a soft, clean surface to prevent scratching the product or your floor.

Persediaan dan Perhimpunan

This bed frame is designed for straightforward assembly. All necessary parts and tools are included in the packaging. It is recommended to have two people for assembly.

Alat yang Diperlukan:

• Termasuk Allen Wrench

Langkah Perhimpunan:

1. Buka bungkus dan Kenalpasti Bahagian: Carefully unpack all components and lay them out. Refer to the included hardware kit and instruction manual for a complete list of parts and hardware.

Figure 2: Components and hardware overview.

2. Pasang Rel Sisi: Connect the side rails to the headboard and footboard using the provided bolts and the Allen wrench. Do not fully tighten bolts until all connections are made.

Figure 3: Attaching side rails to the headboard and footboard.

3. Pasangkan Kepala Katil: Secure the upholstered headboard to the frame. Ensure it is aligned correctly.

Figure 4: Securing the headboard.

4. Pasang Bilah Kayu: Roll out the wood slats across the frame. The slats feature Velcro attachments for quick and secure installation. Press firmly to ensure they adhere to the frame.

Figure 5: Installing the wood slats.

Figure 6: Detail of Velcro slat attachment for noise reduction.

5. Ketatkan Semua Bolt: Once all components are in place, fully tighten all bolts to ensure the frame is stable and secure.
6. Tempat tilam: Position your full-size mattress directly onto the installed wood slats. No box spring is required.

Assembly typically takes less than one hour with two people.

Arahan Operasi

Adjusting the Headboard:

The headboard height can be adjusted to suit different mattress thicknesses and personal preference. The adjustable range is between 41 and 47 inches from the floor.

• To adjust, loosen the bolts connecting the headboard to the frame.
• Slide the headboard up or down to the desired height.
• Retighten the bolts securely to lock the headboard in position.

Figure 7: Headboard height adjustment mechanism.

Pelepasan Bawah Katil:

The bed frame provides approximately 7.87 inches of clearance underneath, suitable for storage or robotic vacuum cleaners.

Rajah 8: Ruang kosong bawah katil untuk penyimpanan.

Penyelenggaraan

Pembersihan:

• For the upholstered headboard and frame, cucian kering sahaja adalah disyorkan.
• For general cleaning, gently vacuum the fabric to remove dust and debris.
• Spot clean any stains immediately with a mild, pH-neutral fabric cleaner, testing on an inconspicuous area first.
• Lap komponen logam dan kayu dengan kain lembut danamp kain. Elakkan bahan kimia yang keras.

Pemeriksaan biasa:

• Periodically inspect all bolts and connections to ensure they remain tight. Tighten as needed to maintain stability and prevent noise.
• Check the wood slats for any signs of damage or wear. Replace if necessary.

Menyelesaikan masalah

Bed Frame Squeaks or Makes Noise:

• Periksa semua bolt: Ensure all assembly bolts are fully tightened. Loose connections are a common cause of noise.
• Periksa bilah: Verify that the Velcro on the wood slats is properly adhered to the frame. Readjust if necessary to prevent friction between slats and frame.
• Verify leg pads: Confirm that the non-slip foot pads on the bed legs are intact and properly positioned to prevent floor friction.

Kerangka Katil Terasa Tidak Stabil:

• Retighten all hardware: Pergi melalui setiap titik sambungan dan pastikan semua bolt dipasang dengan selamat.
• Check for missing parts: Confirm all structural components, including support legs and center bars, are correctly installed as per the assembly instructions.
• Even surface: Ensure the bed frame is placed on a flat, even surface. Uneven flooring can cause instability.

Spesifikasi

Rajah 9: Dimensi produk.

Waranti dan Sokongan

VECELO is committed to providing quality products. For any issues or support needs, please contact VECELO customer service.

Polisi Pemulangan:

Free returns are available within 30 days of purchase. Please refer to your retailer's specific return policy for detailed information.

Perkhidmatan Pelanggan:

For assistance with assembly, missing parts, or any product-related inquiries, please reach out to VECELO customer support through the retailer's platform or the official VECELO webtapak.