1. Pengenalan
This manual provides instructions for the installation and operation of your BN-LINK CP-UWLD28 Dimmer Light Switch. This dimmer switch is designed for single-pole applications and requires a neutral wire for proper functionality. It supports dimmable LED, CFL, and incandescent light bulbs, offering two distinct dimming modes and a memory function to recall your last brightness setting.
2. Apa yang ada di dalam Kotak
- 1x Dimmer Light Switch
- 1x Plat Dinding
- 4x Kacang Wayar
- Skru Panjang 2x
- Skru Pendek 2x
- 1x Manual Pengguna (dokumen ini)
Image: The package contents, including the dimmer switch, wall plate, wire nuts, and mounting screws.
3. Spesifikasi
| Ciri | Perincian |
|---|---|
| Mod Operasi | HIDUP |
| Penilaian Semasa | 3 Amps |
| Vol Operasitage | 125 Volt |
| Peranti Serasi | Dimmable LED (3W-150W), CFL (3W-150W), Incandescent (3W-400W) |
| Jenis Kawalan | Butang Tekan Manual |
| Protokol Ketersambungan | N.A (No WiFi) |
| Dimensi (L x W x H) | 4.49 x 2.76 x 1.34 inci |
| Berat Barang | 5 auns |
| warna | putih |
Image: Product dimensions of the dimmer switch.
4. Pemasangan
Penting: Installation should be performed by a qualified electrician or a person with knowledge of electrical wiring. Ensure power is turned off at the circuit breaker before beginning installation.
- Matikan Kuasa: Locate the circuit breaker controlling the light switch you intend to replace and turn off the power. Verify the power is off using a voltage penguji.
- Keluarkan Suis Lama: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
- Kenal pasti wayar: Identify the following wires in your electrical box:
- Kawat Talian: Membawa kuasa dari pemutus litar.
- Muatkan Wayar: Bersambung ke lekapan lampu.
- Kawat Neutral: Typically white, required for this dimmer switch.
- Wayar bawah tanah: Bare copper or green.
- Wire the Dimmer Switch: Connect the wires from the dimmer switch to the corresponding wires in the electrical box using the provided wire nuts. Refer to the wiring diagram below.
- Suis Dimmer Kawat Putih to Wall Box Kawat Neutral
- Suis Dimmer Kawat Hitam to Wall Box Power Supply's Line (Live)
- Suis Dimmer Kawat Merah to Wall Box Muatkan Wayar
- Suis Dimmer Kawat Hijau to Wall Box Wayar bawah tanah
- Pasang Suis: Carefully push the wired dimmer switch into the electrical box. Secure it with the provided screws.
- Pasang Plat Dinding: Attach the new wall plate over the dimmer switch.
- Pulihkan Kuasa: Hidupkan semula kuasa pada pemutus litar.
Image: Wiring diagram for single-pole installation. Ensure a neutral wire is available.
Note: This dimmer switch works in single-pole only and requires a neutral wire. It is not a smart dimmer switch and cannot be connected to Wi-Fi.
5. Operasi
The BN-LINK Dimmer Light Switch features intuitive controls for adjusting light brightness and an indicator light for visibility in the dark.
Penggunaan Pertama
During the first use, press the power button on the dimmer switch. The initial brightness of the light is set at 100%. Use the "+" and "-" buttons for fast adjustments and fine adjustment.
Video: Demonstration of the BN-LINK Dimmer Light Switch's operation, including fast and fine dimming adjustments and memory function.
Kawal Selesaiview
Image: Labeled buttons on the dimmer switch for power, dimming up, and dimming down, with indicator lights.
- Butang Kuasa: Press to turn the lighting On/Off.
- Dimmer "+" Button:
- Fast Adjustment: Press briefly to increase brightness by 10% each time.
- Pelarasan Halus: Press and hold to gradually increase brightness by 1% each time. - Dimmer "-" Button:
- Fast Adjustment: Press briefly to decrease brightness by 10% each time.
- Pelarasan Halus: Press and hold to gradually decrease brightness by 1% each time. - Lampu Penunjuk: Display the current brightness level (20%, 40%, 60%, 80%, 100%).
Image: Visual representation of the fast (10% increments) and fine (1% increments) brightness adjustment modes.
Fungsi Memori
The dimmer switch remembers the last brightness level used and restores it automatically the next time the light is turned on.
Image: The thoughtful indicator light helps locate the dimmer easily in the dark.
6. Keserasian
This dimmer switch is compatible with various dimmable light sources:
- LED boleh malap: 3-150W, 125V/60Hz
- Dimmable CFL: 3-150W, 125V/60Hz
- Pijar Lamp: 3-400W, 125V/60Hz
Please ensure that your fluorescent lamp dan LED lamp are dimmable, and the total load of the bulbs is within the specified range.
Image: Illustration of wide compatibility with incandescent, dimmable LED, and dimmable CFL bulbs.
