Onvian Smart Bike Tail Light with Turn Signals

Produk Selesaiview

The Onvian Smart Bike Tail Light is a versatile 5-in-1 device designed to enhance cycling safety and security. It integrates a tail light, turn signals, brake light, electric horn, and an anti-theft alarm into a single unit. This model is specifically designed for cargo rack mounting, providing clear visibility even when panniers are used.

Image: The Onvian Smart Bike Tail Light with its oval remote control, showcasing the main unit designed for cargo rack mounting.

Maklumat Keselamatan

• Ensure the device is securely mounted before each ride to prevent detachment.
• Always charge the device fully before first use to activate its functions.
• Do not disassemble or attempt to repair the device yourself, as this may void the warranty and cause damage.
• Jauhkan peranti daripada suhu ekstrem dan cahaya matahari langsung untuk tempoh yang lama.
• While the device is IP65 waterproof, avoid submerging it in water.

Kandungan Pakej

Sila sahkan bahawa semua komponen terdapat dalam pakej:

• Onvian Smart Bike Tail Light Unit
• Wireless Remote Control (Oval)
• Cargo Rack Mounting Bracket
• Handlebar Mounting Bracket for Remote
• Kabel Pengecas USB
• Installation Screws and Nuts
• Kekunci Hex
• Manual Pengguna (dokumen ini)

Image: All components included in the Onvian Smart Bike Tail Light package, laid out for inspection.

Persediaan dan Pemasangan

Initial Activation (Important)

Before first use, the bike light must be charged to activate it. Connect the tail light to a USB power source using the provided USB cable. The charging indicator will illuminate. Once fully charged, the device is ready for use.

Tail Light Installation (Cargo Rack Mount)

1. Identify the mounting holes on your bicycle's rear cargo rack. The bracket is compatible with bolt distances between 35-85mm.
2. Place the tail light cargo rack bracket onto the cargo rack, aligning the holes.
3. Thread the provided bolts through the bracket and rack, securing them with gaskets and nuts.
4. Ensure the bracket is firmly installed and stable.
5. Slide the tail light unit onto the installed cargo rack bracket until it clicks securely into place.

Image: A four-step visual guide demonstrating the process of installing the tail light onto a rear bike rack.

Pemasangan Alat Kawalan Jauh

1. Place the silicone ring of the remote bracket onto your bicycle's handlebar. The bracket is designed to fit handlebars with diameters between 0.78-0.94 inches.
2. Install the bracket onto the handlebar, ensuring a snug fit.
3. Fix the bracket with the provided screw using the hex key.
4. Snap the remote control unit into the bracket clockwise until it is securely in place.

Image: A four-step visual guide demonstrating the process of installing the remote control onto the handlebar.

Arahan Operasi

Hidupkan/Mati Kuasa

Press and hold the main button on the tail light unit for approximately 3 seconds to power it on or off.

Mod Cahaya

The tail light features 6 adjustable light modes. Short press the main button on the tail light unit to cycle through the modes:

• Berkelip Perlahan
• Bernafas
• Berkelip Pantas
• Cahaya Mantap
• Lampu Kecemasan
• Mati

The tail light is equipped with 31 high-lumen COB LEDs, providing up to 160 lumens of brightness for enhanced visibility during night riding.

Isyarat Pusing

Use the wireless remote control to activate the turn signals:

• Tekan ke Isyarat Belok Kiri button on the remote to activate the left turn indicator.
• Tekan ke Isyarat Belok Kanan button on the remote to activate the right turn indicator.
• The turn signals will flash and emit an audible sound to alert surrounding traffic.
• Press the same turn signal button again to deactivate the signal.

Image: A visual representation of a bicycle using the left and right turn signals to indicate direction on a road.

Brake Light Function

The tail light features an auto-sensing brake light function. When deceleration is detected, the tail light will automatically illuminate brighter to signal braking to following vehicles and pedestrians.

Tanduk Elektrik

The device includes an electric horn with 3 distinct sounds. Press the tanduk button on the remote control to activate the horn. Cycle through the horn sounds by repeatedly pressing the horn button:

• Electric Car Sound
• Bunyi Horn
• Birdcall Sound

Penggera Anti Kecurian

To arm the anti-theft alarm:

1. Ensure the tail light is powered off.
2. Tekan ke Kunci button on the remote control. The tail light will flash once, indicating the alarm is armed.
3. If the bicycle is moved or disturbed, the 110dB alarm will sound to deter theft.

To disarm the anti-theft alarm, press the Buka kunci butang pada alat kawalan jauh.

The alarm sensitivity can be adjusted to 7 levels. Refer to the detailed instructions in the included paper manual for specific steps on adjusting sensitivity.

Image: An illustration depicting the 110dB anti-theft alarm sounding on a bicycle, designed to deter potential thieves.

Mengecas

The Onvian Smart Bike Tail Light is equipped with a built-in 2000mAh rechargeable battery. To charge the device:

• Locate the USB charging port on the tail light unit.
• Connect the provided USB cable to the tail light and a standard USB power adapter (not included), computer USB port, or power bank.
• A charging indicator light will show the charging status.
• Pengecasan penuh biasanya mengambil masa lebih kurang 7 jam.
• Once fully charged, the tail light can operate for up to 70+ hours, depending on the light mode and feature usage.

The wireless remote control uses a replaceable button cell battery. Refer to the remote control's specific instructions for battery replacement.

Penyelenggaraan

• Keep the tail light and remote control clean by wiping them with a soft, damp kain. Elakkan menggunakan pembersih atau pelarut yang kasar.
• Ensure the USB charging port cover is securely closed when not charging to maintain the IP65 waterproof rating.
• Simpan peranti di tempat yang sejuk dan kering apabila tidak digunakan untuk tempoh yang lama.
• Regularly check the mounting brackets for tightness to ensure the device remains secure during rides.

Image: A cyclist riding in the rain, demonstrating the PC+ANTI UV material and IP65 waterproof and dustproof features of the tail light.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

This Onvian Smart Bike Tail Light comes with a Waranti 1 tahun dari tarikh pembelian, meliputi kecacatan pembuatan. Sila simpan bukti pembelian anda untuk tuntutan waranti.

For technical support, troubleshooting assistance, or warranty inquiries, please contact Onvian customer service through their official channels or visit the Onvian Store on Amazon.